Portable Weight Measuring Instrument

2017 ◽  
Author(s):  
Vishal G. Nandanwar ◽  
M. Mohammed Kashif ◽  
Rahul S. Ankushe
Keyword(s):  
Measuring Instrument

The Software «MMI–calibration 3.0»

Metrologiya ◽  
2020 ◽  
pp. 16-24
Author(s):  
Alexandr D. Chikmarev
Keyword(s):  
Power Series ◽  
Data Processing ◽  
Statistical Treatment ◽  
Correction Function ◽  
Calibration Function ◽  
Measuring Instrument ◽  
Working Standard ◽  
Calibration Protocol ◽  
Error Probabilities ◽  
Continuous Power

A single program has been developed to ensure that the final result of the data processing of the measurement calibration protocol is obtained under normal conditions. The calibration result contains a calibration function or a correction function in the form of a continuous sedate series and a calibration chart based on typical additive error probabilities. Solved the problem of the statistical treatment of the calibration protocol measuring in normal conditions within a single program “MMI–calibration 3.0” that includes identification of the calibration function in a continuous power series of indications of a measuring instrument and chart calibration. An example of solving the problem of calibration of the thermometer by the working standard of the 3rd grade with the help of the “MMI-calibration 3.0” program.

Analysis of significant measures for thermal conductivity

2020 ◽  
pp. 35-42
Author(s):  
Yuri P. Zarichnyak ◽  
Vyacheslav P. Khodunkov
Keyword(s):  
Thermal Conductivity ◽  
Heat Flux ◽  
Surface Heat Flux ◽  
Heat Flux Density ◽  
Measurement Method ◽  
Conductivity Measurement ◽  
Surface Heat ◽  
Measuring Instrument ◽  
New Class ◽  
Achievable Accuracy

The analysis of a new class of measuring instrument for heat quantities based on the use of multi-valued measures of heat conductivity of solids. For example, measuring thermal conductivity of solids shown the fallacy of the proposed approach and the illegality of the use of the principle of ambiguity to intensive thermal quantities. As a proof of the error of the approach, the relations for the thermal conductivities of the component elements of a heat pump that implements a multi-valued measure of thermal conductivity are given, and the limiting cases are considered. In two ways, it is established that the thermal conductivity of the specified measure does not depend on the value of the supplied heat flow. It is shown that the declared accuracy of the thermal conductivity measurement method does not correspond to the actual achievable accuracy values and the standard for the unit of surface heat flux density GET 172-2016. The estimation of the currently achievable accuracy of measuring the thermal conductivity of solids is given. The directions of further research and possible solutions to the problem are given.

PENGARUH INPUT PROSES RELATIONSHIP MARKETING TERHADAP OUTPUT PROSES RELATIONSHIP MARKETING

2019 ◽  
Vol 27 (2) ◽  
pp. 190-206
Author(s):  
Surawan Setya Budi S
Keyword(s):  
Relationship Marketing ◽  
Research Use ◽  
Measuring Instrument ◽  
Total Quality ◽  
Input Process ◽  
Customer Expectations ◽  
Simultaneous Test ◽  
Marketing Process ◽  
Process Understanding ◽  
The Relationship

This research use relationship marketing teory which applied 4 factor of input process understanding customer expectations, building service partnerships, empowiring employers, and total quality management, and output relationship marketing process: customer satisfaction and customer layalty. The objective of this research is to find out wich factors of input process that has more impact on the output process in relationship marketing. There are 60 trusted correspondencea from Grand Inna Malioboro Hotel customer whom at least have been stayed at the hotel three times. The method of collecting data in these research use questioners and Likert scale measuring instrument 5 points that will be tested by the instrument and analyzed by using regressision analysi the simultaneous test of variabel for the relationship marketing input s. The result of the instrument shows the items used are valid and reliable. It displays the outpout process passed the assumtions test, while the signifikacant relationship marketingto the output of relationtionship marketing, For the passive test of vareable input process relationship marketing with the ouput process relationship marketing shows all significant variables unless vareabel understands customer expectations does not have a significant effect on the process of output relationship marketing

Management Measurement Scale As A Reference To Determine Interval In A Variable

2018 ◽  
Vol 2 (1) ◽  
pp. 45-54
Author(s):  
Qurotul Aini ◽  
Siti Ria Zuliana ◽  
Nuke Puji Lestari Santoso
Keyword(s):  
Information Technology ◽  
Quantitative Data ◽  
Rating Scale ◽  
Semantic Differential ◽  
Short Length ◽  
Measurement Scale ◽  
Measuring Instrument ◽  
Guttman Scale ◽  
Measurement Scales ◽  
Thurstone Scale

The scale is usually used to check and determine the value of a qualitative factor in quantitative measures. The measurement scale is a management in agreement that is used as a reference to determine the short length of the interval that is in the measuring instrument, so that the measuring instrument when used in measurements will produce quantitative data. The results of the scale management calculation must be interpreted carefully because in addition to producing a rough picture, the respondent's answers are not just straightforward to be trusted. Types of measurement scales: Likert scale, Guttman scale, semantic differential scale, rating scale, Thurstone scale, Borgadus scale, and various other measurement management scales. One of the most difficult jobs for information technology researchers faced with the necessity of measuring variables is: finding directions in the midst of many existing sizes. If there is a good size for a particular variable, it seems that there are not many reasons to compile a new size yourself. Keywords: Scale, Measurement, Variables.

DEVELOPMENT OF MACAMI (MARI MEMBACA DAN MEMAHAMI) INSTRUMENT USING MACROMEDIA FLASH 8 IN PRIMARY SCHOOLS

2020 ◽  
Vol 4 (3) ◽  
pp. 544
Author(s):  
Ermaida Dewi
Keyword(s):  
Reading Comprehension ◽  
Primary School ◽  
Product Design ◽  
Primary Schools ◽  
Measuring Instrument ◽  
School Students ◽  
Average Percentage ◽  
Measuring Devices ◽  
Comprehension Ability ◽  
Feasibility Test

The background of this research is an instrument of learning for reading comprehension which in general is still dominated by an instrument in the form of print out which makes the students’ interest to read is reduced. In addition, this instrument is usually done manually or handwritten so that the students’ work must be corrected manually and require some time to get the results. This study aims to develop instruments or measuring devices for reading comprehension in the Primary School in Pekanbaru and find out the feasibility of measuring devices for reading comprehension skills. This product is Macromedia Flash 8 based namely "MaCaMi" which stands forMari Membaca dan Memahami. The research method used was the 4D model with four stages, such as the define stage, the design phase, the develop phase, and the dessiminate stage which is limited to the third stage. The data of this study were obtained from product design expert validation questionnaire, questionnaire validated by linguists, teacher response questionnaire and students response questionnaire. The data were generated quantitatively and analyzed by using the assessment criteria to determine the product quality. The results of this study showed the assessment of product design experts in draft 1 had an average percentage of 69.61% with the appropriate category then had increased in draft 2 to 90.56% with the very feasible category. The results of  the feasibility test by linguists in draft 1 with had average percentage of 95.30% with the very feasible category then increased in draft 2 to 97.20% withn the very feasible category. The results of the teacher's response to the reading comprehension measuring instrument in the Primary School in Pekanbaru developed by researchers obtained an average percentage of 93.50% with a very good category and the results of students' responses to the measuring instrument obtained an average percentage of 89.90% with a category very good. Based on these results, it can be concluded that the product developed by researchers is feasible to be used as a measure of reading comprehension ability of primary school students.

Tourists’ and Residents’ Impressions of A Heritage Tourism Site: The Case of Kampong Taman Sari, Indonesia

2014 ◽  
Vol 8 (3) ◽  
pp. 181 ◽  
Author(s):  
Jenny Ernawati ◽  
Gary T. Moore
Keyword(s):  
Heritage Tourism ◽  
Semantic Differential ◽  
The Other ◽  
Measuring Instrument ◽  
Built Heritage ◽  
Other Hand ◽  
Similarities And Differences

The interface between tourism and built heritage is complicated because much built heritage is located in the middle of living communities. Questions arise about how to achieve a balance between the expectations of tourists and the community. To study this question, this paper reports on tourists’ and residents’ impressions of an international heritage tourism site, the Kampong Taman Sari in Indonesia. Using a linear-numeric semantic differential as the measuring instrument and nine consensus photographs of the site as stimuli, the study investigated similarities and differences in impressions between three groups: tourists (international and domestic) and residents. Three principal dimensions were found to underlie impressions of the site: Attractiveness, Organisation, and Novelty. Significant differences were found among all three groups in their impressions of Attractiveness. In terms of impressions of the Organisation of the site, international and domestic tourists have similar impressions but these differ significantly from the impressions of residents. On the other hand, domestic tourists and residents have similar impressions of the Novelty of the site, which is evaluated differently by international tourists.

PENGARUH KECERDASAN EMOSIONAL TERHADAP TINGKAT PEMAHAMAN AKUNTANSI, KEPERCAYAAN DIRI SEBAGAI VARIABEL PEMODERASI: DITINJAU DARI PERSPEKTIF GENDER

2009 ◽  
Author(s):  
Poppy Nurmayanti
Keyword(s):  
Social Skills ◽  
Social Skill ◽  
Self Regulation ◽  
Point Of View ◽  
Self Awareness ◽  
Measuring Instrument ◽  
Simple Linear Regression ◽  
Moderator Variable ◽  
Self Confidence ◽  
Emotional Intellegence

This research aim to test do emotional intellegence consisting of five component that is recognition self awareness, self regulation, motivation, empathy, and social skills have an effect on to storey level understanding of accountancy point of view from gender perspective. This research also aim to know the existence of role self confidence as moderating variable to emotional intellegence influence to storey level understanding of accounting. Besides also this research aim to see the existence of difference emotional intellegence between student owning self confidence of strong with student which is self confidence of weak. Measuring instrument to measure storey level understanding of accountancy is average point of accountancy that is PA1, PA2, AKM1, AKM2, AKL1, AKL2, AU1, AU2, and TA. The data analysis used is simple linear regression, Moderating Regression Analysis (MRA), and independent sample t-test. The results show that recognition self awareness, self regulation, motivation, social skill and empathy do not have an effect on by significance and only empatht  has  role as quasi moderator variable. There is no difference between emotional intellegence woman and man. But, weak self confidence and strong self confidence differ for all of emotional intellegence (recognition self awareness, self regulation, motivation, empathy, and social skills). Many factors which influence storey level understanding of accountancy like mental stress factor, and so on. Result of this research can give contribution to university in order to compiling curricullum and give input to student in order to develop and manage their emotional intellegence and self confidence.

PENGEMBANGAN ALAT UKUR COMPRESSION TESTER

2019 ◽  
Vol 3 (2) ◽  
pp. 111-118
Author(s):  
Bahtiar Wilantara ◽  
Raharjo Raharjo
Keyword(s):  
Pressure Gauge ◽  
Welding Process ◽  
Field Trials ◽  
Ease Of Use ◽  
Hole Drilling ◽  
Measurement Tool ◽  
Drilling Process ◽  
Measuring Instrument ◽  
Digital Compression ◽  
Materials Used

This study aims to develop an analog compression tester measuring instrument into a digital compression tester as a measurement tool that can provide effectiveness and efficiency to users.                     This research is a research and development or R&D. This research was conducted in several steps, namely: problem identification, information gathering, product design, product manufacture, expert validation, product revision, testing, final production. The development of analog compression tester was first validated by material experts, media experts, and 15 students, and 5 students for field trials. The subjects of this study were vocational students at Taman Karya Madya Teknik Kebumen. Data collection techniques used in this study using instruments in the form of a questionnaire. The data analysis technique of this research is descriptive qualitative and quantitative descriptive percentage.                 The results of the development of digital compression tester designs are: 1) the tools and materials used are electric drill, grinding, cutter, goggles, gloves, masks, ruler, acetaminine welding, screwdriver, scissors, digital dial pressure gauge, hose, spark plugs, clamps , and nepel, 2) the manufacturing process that starts from the cutting process, the hole drilling process, the welding process and the process of connecting between components, 3) the workings of digital compression tester design that is reading the pressure or compression of the machine displayed on the monitor digitally using dial pressure digital gauge, 4) the test results obtained from the validation results from: a) material experts at 89% or Eligible; b) media experts at 85% or reasonable; c) response of field trial students in terms of ease of use and reading of 90% or feasible. Thus, the conclusion that the digital compression tester measuring instrument declared feasible to use for measurement.

METHOD FOR ESTIMATING ERRORS IN MEASURING INSTRUMENTS BY THE SPACE CATALOGUE ORBITS

2018 ◽  
pp. 76-84
Author(s):  
K. V. Sorokin ◽  
E. A. Sunarchina
Keyword(s):  
Dynamic Model ◽  
New Method ◽  
Measuring Instruments ◽  
Measuring Instrument ◽  
Software Complex

Improvement of orbits precision is one of the most important tasks of space surveillance catalogue maintenance. The solution of this problem is directly related to an adequate consideration of the errors of the coordinate information from the measuring instruments. The article consideresd a new method for estimating the precision of measuring instruments on the catalog orbits. To carry out such analysis, in PJSC «VIMPEL» special technological program was created. Main results of a study of radar errors with orbits of space surveillance catalogue was presented. Also, the results were compared with data of measuring instrument's calibration software complex. This software complex provides determination of satellite's position with errors less than 10 m. A new dynamic model of measuring instrument errors is proposed.

Sign in / Sign up

Export Citation Format

Share Document