Studies of some non conventional split ring and complementary split ring resonators for waveguide band stop & band pass filter application

2013 ◽  
Author(s):  
Amit Bage ◽  
Sushrut Das
Keyword(s):  
Ring Resonators ◽  
Band Pass Filter ◽  
Split Ring ◽  
Pass Filter ◽  
Split Ring Resonators ◽  
Band Pass

scholarly journals E-Textile Metamaterials: Stop Band Pass Filter

2021 ◽  
Vol 11 (22) ◽  
pp. 10930
Author(s):  
Bahareh Moradi ◽  
Raul Fernández-García ◽  
Ignacio Gil Gali
Keyword(s):  
Stop Band ◽  
Ring Resonators ◽  
Band Pass Filter ◽  
Split Ring ◽  
Pass Filter ◽  
Split Ring Resonators ◽  
Device Applications ◽  
Band Pass ◽  
Filter Signal ◽  
And Control

In this paper, the utilization of common fabrics for the manufacturing of e-textile metamaterial is investigated. The proposed design is based on a transmission line loaded with split-ring resonators (SRRs) on a cotton substrate for filter signal application. The proposed design provides a stop band between 2.7 GHz and 4.7 GHz, considering a four stage SRR topology. Experimental results showed stop band levels higher than −30 dB for the proposed compact embroidered metamaterial e-textiles. The validated results confirmed embroidery as a useful technique to obtain customized electromagnetic filter properties, such as transmitted signal filtering and control, on wearable tech device applications.

Improved RF Metamaterial Band-Pass Filter Design Using CSRR Structures on LCP Substrate

2015 ◽  
Vol 2015 (DPC) ◽  
pp. 001016-001047
Author(s):  
Christopher James ◽  
Robert N. Dean
Keyword(s):  
Frequency Response ◽  
Filter Design ◽  
Ring Resonators ◽  
Band Pass Filter ◽  
Split Ring ◽  
Pass Filter ◽  
Signal Line ◽  
Low Pass ◽  
Band Pass ◽  
High Pass

In the past decade, the emergence of man-made structures with unusual electromagnetic properties not seen in nature—commonly known as “metamaterials”—has generated much interest in designing filters, antennas, lenses, and other devices based on negative values of permittivity (ε) and permeability (μ). Manipulating negative values of these electromagnetic parameters has found applications in communication technology and cloaking research by taking advantage of interesting phenomena such as a negative index of refraction and the reverse Doppler Effect. RF and microwave filters with different frequency responses (low-pass, high-pass, band-pass, and band-stop) can be realized by varying microstrip signal line shapes at a frequency of interest due to the fact that the metamaterial frequency response is dependent on the physical dimensions of the structures. For example, the center frequency of a filter can be determined by adjusting the physical dimensions of metamaterial building blocks called split-ring resonators (SRR) or their duals, complementary split-ring resonators (CSRR). To further metamaterial applications, however, non-planar surfaces and effects of curvature on frequency response must also be considered. In this work, an RF metamaterial filter is presented to demonstrate an improvement in the band-pass frequency response from a previous design at Auburn University by enhancing the upper band behavior of the filter. This is achieved by modifying the metamaterial design on the microstrip device to incorporate new additions to the signal line to combine both high-pass and low-pass metamaterial design concepts, resulting in a band-pass response. The filter is designed using a liquid crystal polymer (LCP) slab as a substrate due in part to its dielectric properties, but also to investigate the filter's performance on a flexible structure. An exploration into the roles of different signal line and CSRR dimensions in filter design is given, and a microstrip filter designed using ANSYS HFSS is shown along with simulation results to verify band-pass filter response. LCP was selected due to its excellent RF properties, its resistance to moisture absorption, and its ability to be micromachined.

Sign in / Sign up

Export Citation Format

Share Document