Heat Transfer from Rectangular Pin Fin Heat Sinks under Air Jet Impingement

2011 ◽  
Author(s):  
Tu Fubing ◽  
Mao Jianfeng ◽  
Zhou Jiemin ◽  
Zeng Wenhui ◽  
Jia Yu ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Jet Impingement ◽  
Heat Sinks ◽  
Pin Fin ◽  
Air Jet

Experimental Measurements of the Flow and Heat Transfer of a Square Jet Impinging on an Array of Square Pin Fins

2005 ◽  
Vol 128 (1) ◽  
pp. 61-70 ◽  
Author(s):  
Johnny S. Issa ◽  
Alfonso Ortega
Keyword(s):  
Heat Transfer ◽  
Flow Behavior ◽  
Jet Impingement ◽  
Tip Clearance ◽  
Heat Sinks ◽  
Clearance Ratio ◽  
Pressure Loss Coefficient ◽  
Pin Fin ◽  
Air Jet ◽  
Pin Fins

The flow behavior and heat transfer due to free air jet impingement on pin fin heat sinks was experimentally studied. Flow velocities and tip clearance ratios were varied from 2to20m∕s and 0 to 1, respectively. The stagnation pressure recovered at the center of the heat sink was higher for tall pins than for short pins. The pressure loss coefficient showed little dependence on Re, increased with increasing pin density and pin diameter, and decreased with increasing pin height and clearance ratio. The overall base-to-ambient thermal resistance decreased with increasing Re number, pin density, and pin diameter.

scholarly journals Mat Lab Coding and Experimental Analysis of Heat Transfer Rate In Multi Air Jet Impingement

2019 ◽  
Vol 8 (3) ◽  
pp. 1068-1077
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Jet Impingement ◽  
Heat Sinks ◽  
Pin Fin ◽  
Air Jets ◽  
Air Jet ◽  
Existence Time ◽  
Plate Distance

The Electronic equipment’s have turned out to be practically unavoidable. This electronic gadget assumes a key job in numerous basic zones of innovation and brought about high thickness of segments in little volume. In this manner, there has been a consistent increment in heat squandered rate from electronic segments. Advancement likewise prompted more prominent power in the segments and there is an extensive increment in the heat dissemination of electronic segments. Analysts for the most part utilized the idea of constrained convection air to evacuate heat at the outside of the segments. Increment the existence time of parts. In this present paper impinging air jets is examined tentatively. Heat transfer attributes are analyzed. Analysis have been directed at (Z/D =5, 10 and 15) and Velocity of air (V (m/sec) = 5.6,5.2,4.8,3.9,3.5,2.6) and (V(m/sec)= 6.1,5.8,5.3,3.7,3.3,2.9) for flat plate and pin fin heat sinks are respectively and Heat input (Q=32watts). Empirical correlations are developed from results and Mat lab coding was developed at different conditions and the results show that the relation between heat transfer coefficient Vs velocity and Reynolds number Vs Nusselt number and Nu(theoretical) Vs Nu(experimental) and heat transfer coefficient Vs nozzle to plate distance(z/d)

Experimental Measurements of the Flow and Heat Transfer of a Square Jet Impinging on an Array of Square Pin Fins

2002 ◽  
Author(s):  
Johnny S. Issa ◽  
Alfonso Ortega
Keyword(s):  
Heat Transfer ◽  
Thermal Resistance ◽  
Flow Behavior ◽  
Jet Impingement ◽  
Tip Clearance ◽  
Heat Sinks ◽  
Clearance Ratio ◽  
Cross Sectional ◽  
Pressure Loss Coefficient ◽  
Air Jet

An experimental investigation was conducted to explore the flow behavior, pressure drop, and heat transfer due to free air jet impingement on square in-line pin fin heat sinks (PFHS) mounted on a plane horizontal surface. A parametrically consistent set of aluminum heat sinks with fixed base dimension of 25 × 25 mm was used, with pin heights varying between 12.5 mm and 22.5 mm, and fin thickness between 1.5 mm and 2.5 mm. A 6:1 contracting nozzle having a square outlet cross sectional area of 25 × 25 mm was used to blow air at ambient temperature on the top of the heat sinks with velocities varying from 2 to 20 m/s. The ratio of the gap between the jet exit and the pin tips to the pin height, the so-called tip clearance ratio, was varied from 0 (no tip clearance) to 1. The stagnation pressure recovered at the center of the heat sink was higher for tall pins than short pins. The pressure loss coefficient showed a little dependence on Re, increased with increasing pin density, and pin diameter, and decreased with increasing pin height and clearance ratio. The overall base-to-ambient thermal resistance decreased with increasing Re number, pin density and pin diameter. Surprisingly, the dependence of the thermal resistance on the pin height and clearance ratio was shown to be mild at low Re, and to vanish at high Re number.

scholarly journals Heat Transfer From a Finned Surface in Ducted Air Jet Suction and Impingement

1999 ◽  
Vol 122 (3) ◽  
pp. 282-285 ◽  
Author(s):  
Luis A. Brignoni ◽  
Suresh V. Garimella
Keyword(s):  
Heat Transfer ◽  
Heat Sink ◽  
Jet Impingement ◽  
Target Distance ◽  
Transfer Coefficients ◽  
Pin Fin ◽  
Heat Transfer Coefficients ◽  
Air Jet ◽  
Finned Surface ◽  
Different Diameters

Experimental measurements were obtained to characterize the thermal performance of ducted air suction in conjunction with a pin-fin heat sink. Four single nozzles of different diameters and two multiple-nozzle arrays were studied at a fixed nozzle-to-target distance, for different turbulent Reynolds numbers 5000⩽Re⩽20,000. Variations of nozzle-to-target distance, i.e., open area, in ducted suction were found to have a strong effect on heat transfer especially with the larger diameter single nozzle and both multiple-nozzle arrays. Enhancement factors were computed with the heat sink in suction flow, relative to a bare surface, and were in the range of 8.3 to 17.7, with the largest value being obtained for the nine-nozzle array. Results from the present study on air jet suction are compared with previous experiments with air jet impingement on the pin-fin heat sink. Average heat transfer coefficients and thermal resistance values are reported for the heat sink as a function of Reynolds number, air flow rate, and pumping power. [S1043-7398(00)00903-8]

scholarly journals Experimental and Cfd Analysis of Heat Transfer Rate in Multi Air Jet Impingement Over A Flat Plate and Pin-Fin Heat Sink

2020 ◽  
Vol 9 (12) ◽  
pp. 329-337
Keyword(s):  
Heat Transfer ◽  
Flat Plate ◽  
Heat Sink ◽  
Heat Transfer Performance ◽  
Heated Surface ◽  
Jet Impingement ◽  
Turbulent Jet ◽  
Transfer Performance ◽  
Pin Fin ◽  
Air Jet

In this paper reports the results of investigation of heat transfer performance of in compression air jet impinging of heated surface over a flat plate & pin-fin heat sink. To mimic the computer processor of flat plate and pin fin dimensions are 120mm*75mm and pin height is 5cm and fin radius is 1cm and L/d ratios are 5,10,15respectively. By using this simulation in Ansys fluent software to perform the turbulent jet impingement on a surface. The bottom surface of the plate is supply constant heat flux and top surface of the plate is cooled by an impingement jet of air. It has two equations are used k-w model and shear stress transport to handle the turbulent jet. The result of flat plate heat sink is compare the Experimental and simulation is higher at 0.89% of experimental to compare numerical and Nusselt is higher at 3.35% of numerical to compare the experimental and heat transfer coefficient is higher at 4.51% of numerical to compare the Experimental and result of pin fin heat sink is compare the Experimental and numerical is higher at 0.23% of experimental to compare the numerical and Nusselt number is higher at 0.71% of numerical to compare the experimental and heat transfer coefficient is higher at 0.88% of numerical to compare the experimental. The effect of L/d ratios of jet impingement over a flat plate and pin fin heat sink on the heat transfer performance of the heated surface of investigated.

Heat transfer of multi-slot nozzle air jet impingement with different Reynolds number

2020 ◽  
pp. 116470
Author(s):  
Jinqi Zhu ◽  
Ruifeng Dou ◽  
Ye Hu ◽  
Shixing Zhang ◽  
Xuyun Wang
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Jet Impingement ◽  
Slot Nozzle ◽  
Air Jet
Sign in / Sign up

Export Citation Format

Share Document