Sliding Mode Control of Single-Phase AC-DC Boost Converter Using Time-Varying Sliding Surface

2008 ◽  
Author(s):  
Yiwen He ◽  
Weisheng Xu ◽  
Hongrun Wang
Keyword(s):  
Sliding Mode Control ◽  
Single Phase ◽  
Sliding Mode ◽  
Boost Converter ◽  
Time Varying ◽  
Sliding Surface ◽  
Mode Control

scholarly journals New Time-Varying Sliding Surface for Switching Type Quasi-Sliding Mode Control

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3811
Author(s):  
Katarzyna Adamiak ◽  
Andrzej Bartoszewicz
Keyword(s):  
Sliding Mode Control ◽  
Continuous Time ◽  
Sliding Mode ◽  
Representative Point ◽  
Time Varying ◽  
Sliding Surface ◽  
External Disturbances ◽  
Mode Control ◽  
Switching Type ◽  
Time Systems

This study considers the problem of energetical efficiency in switching type sliding mode control of discrete-time systems. The aim of this work is to reduce the quasi-sliding mode band-width and, as follows, the necessary control input, through an application of a new type of time-varying sliding hyperplane in quasi-sliding mode control of sampled time systems. Although time-varying sliding hyperplanes are well known to provide insensitivity to matched external disturbances and uncertainties of the model in the whole range of motion for continuous-time systems, their application in the discrete-time case has never been studied in detail. Therefore, this paper proposes a sliding surface, which crosses the system’s representative point at the initial step and then shifts in the state space according to the pre-generated demand profile of the sliding variable. Next, a controller for a real perturbed plant is designed so that it drives the system’s representative point to its reference position on the sliding plane in each step. Therefore, the impact of external disturbances on the system’s trajectory is minimized, which leads to a reduction of the necessary control effort. Moreover, thanks to a new reaching law applied in the reference profile generator, the sliding surface shift in each step is strictly limited and a switching type of motion occurs. Finally, under the assumption of boundedness and smoothness of continuous-time disturbance, a compensation scheme is added. It is proved that this control strategy reduces the quasi-sliding mode band-width from O(T) to O(T3) order from the very beginning of the regulation process. Moreover, it is shown that the maximum state variable errors become of O(T3) order as well. These achievements directly reduce the energy consumption in the closed-loop system, which is nowadays one of the crucial factors in control engineering.

scholarly journals A Multi-Slope Sliding-Mode Control Approach for Single-Phase Inverters under Different Loads

2016 ◽  
Author(s):  
Ghazanfar Shahgholian ◽  
Babk Khajeh Shalaly
Keyword(s):  
Sliding Mode Control ◽  
Single Phase ◽  
Sliding Mode ◽  
Main Idea ◽  
Sliding Surface ◽  
Tracking Accuracy ◽  
Control Approach ◽  
Mode Control ◽  
Non Linear ◽  
Slope Function

In this paper, a new approach to the sliding-mode control of single-phase inverters under linear and non-linear loads is introduced. The main idea behind this approach is to utilize a non-linear, flexible and multi-slope function in controller structure. This non-linear function makes the controller possible to control the inverter by a non-linear multi-slope sliding surface. In general, this sliding surface has two parts with different slopes in each part and the flexibility of the sliding surface makes the multi-slope sliding-mode controller (MSSMC) possible to reduce the total harmonic distortion, to improve the tracking accuracy, and to prevent overshoots leading to undesirable transient-states in output voltage which are occurred when the load current sharply rises. In order to improve the tracking accuracy and to reduce the steady-state error, an integral term of the multi-slope function is also added to the sliding surface. The improved performance of the proposed controller is confirmed by simulations and finally, the results of the proposed approach are compared with a conventional SMC and a SRFPI controller.

Finite-time H∞ sliding mode control of uncertain T-S fuzzy system with time-varying delay based on observer

2021 ◽  
Vol 40 (1) ◽  
pp. 983-999
Author(s):  
Huan Li ◽  
Pengyi Tang ◽  
Yuechao Ma
Keyword(s):  
Sliding Mode Control ◽  
Finite Time ◽  
Sliding Mode ◽  
Linear Matrix ◽  
Time Interval ◽  
Sliding Mode Controller ◽  
Time Varying ◽  
Sliding Surface ◽  
State Estimator ◽  
Mode Control

In this paper, a class of observer-based sliding mode controller is designed, and the finite-time H∞ control problem of uncertain T-S fuzzy systems with time-varying is studied. Firstly, an integral-type sliding surface function with time-delay is devised based on the state estimator, and sufficient criteria of finite-time bounded and finite-time H∞ bounded can be obtained for the T-S systems. Moreover, the proposed sliding mode control law is integrated to ensure the dynamics of controlled system into the sliding surface in a finite-time interval. Then, according to the linear matrix inequalities (LMIs), the desired gain matrices of fuzzy sliding mode controller and state estimator are derived. Finally, effectiveness gives some illustrative examples may be used to display the value of the current proposed method as well as a significant improvement.

PMLSM Nonlinear Integral Sliding Mode Control Based on Gain Time- Varying Reaching Law

2020 ◽  
Vol 13 (5) ◽  
pp. 743-750
Author(s):  
Chao Zhang ◽  
Liwei Zhang ◽  
Bo Peng ◽  
He Zhao
Keyword(s):  
Sliding Mode Control ◽  
Permanent Magnet ◽  
Sliding Mode ◽  
Dynamic Performance ◽  
Linear Motor ◽  
Time Varying ◽  
Sliding Surface ◽  
Reaching Law ◽  
Mode Control ◽  
Global Robustness

Background: The permanent magnet synchronous linear motor is a strongly coupled, nonlinear system. It has been applied in many fields, especially in the field of machining lathes and rail transportation. In order to ensure the permanent magnet synchronous linear motor has good dynamic performance and robustness, sliding mode control is gradually applied to the control system of permanent magnet synchronous linear motor. However, in the traditional sliding mode control, the convergence speed is slow, and the robust performance is poor when the sliding surface is not reached. Objective: The main purpose of this paper is to improve the dynamic performance and robustness of the permanent magnet synchronous linear motor during the process of approaching the sliding surface. Methods: Firstly, the type of nonlinear curve with "small error reduction, large error saturation" is introduced to design a nonlinear integral speed controller with global robustness. Secondly, the gain rate time-varying reaching law is introduced to reduce "chattering". Finally, using a symbolic tangent function instead of a sign function in designing a sliding mode observer reduces fluctuations in load observations. Results: Finally, the correctness and effectiveness of the control method are proved by simulation. Conclusion: The results of the simulation show that the nonlinear integral sliding mode controller based on gain time-varying reaching law is shown to have good global robustness and dynamic performance.

scholarly journals Field-of-View Constrained Impact Time Control Guidance via Time-Varying Sliding Mode Control

Aerospace ◽  
2021 ◽  
Vol 8 (9) ◽  
pp. 251
Author(s):  
Shuai Ma ◽  
Xugang Wang ◽  
Zhongyuan Wang
Keyword(s):  
Sliding Mode Control ◽  
Sliding Mode ◽  
Field Of View ◽  
Time Varying ◽  
Sliding Surface ◽  
Impact Time ◽  
Mode Control ◽  
Time Control ◽  
Guidance Law ◽  
The Impact

The problem of impact time control guidance with field-of-view constraint is addressed based on time-varying sliding mode control. The kinematic conditions that satisfy the impact time control with field-of-view constraint are defined, and then a novel time-varying sliding surface is constructed to achieve the defined conditions. The sliding surface contains two unknown coefficients: one is tuned to achieve the global sliding surface to satisfy the impact time constraint and zero miss distance, and the other is tuned to guarantee the field-of-view constraint. The guidance law is designed to ensure the realization of the global sliding mode. On this basis, the guidance law is modified to a closed-loop structure, and the maximum detection capability of the seeker is utilized to a greater extent. Under the proposed guidance law, neither the small angle assumption nor time-to-go estimation is needed. The guidance command is continuous and converges to 0 at the desired impact time. Simulation results demonstrate the effectiveness and superiority of the proposed guidance law.

Sliding Mode Control Based on Novel Nonlinear Sliding Surface for a Class of Time-Varying Delay Systems

2014 ◽  
Vol 615 ◽  
pp. 375-381
Author(s):  
Qi Feng Ren ◽  
Cun Che Gao ◽  
Shu Hui Bi
Keyword(s):  
Sliding Mode Control ◽  
Sliding Mode ◽  
Sufficient Conditions ◽  
Delay Systems ◽  
Linear Matrix ◽  
Time Varying ◽  
Sliding Surface ◽  
Time Varying Delay ◽  
Mode Control ◽  
Varying Delay

The sliding mode control (SMC) design is discussed for a class of time-varying delay systems which is delay-range-dependent and rate-range-dependent. A novel time-varying nonlinear sliding surface is employed. The choice of nonlinear sliding surface is to change the state matrix of sliding mode system, which can combine the advantages of different conventional linear sliding surfaces. Thus the better transient qualities of system states, i.e., quicker response and smaller overshoot, can be achieved. The sufficient conditions ensuring the asymptotic stability of sliding mode are derived in terms of linear matrix inequalities. The algorithms deciding unknown parameters of the nonlinear sliding surface and the corresponding sliding mode controller are also presented. Finally, A numerical example is given to illustrate the effectiveness of the result here.

Sign in / Sign up

Export Citation Format

Share Document