Research on relationship between cotton fabric structural parameters and water vapor permeability with regression analysis

2010 ◽  
Author(s):  
Jian-da Cao ◽  
Wei Wang ◽  
Ron-ying Wong ◽  
Ru-yon Di ◽  
Jion Chen ◽  
...  
Keyword(s):  
Regression Analysis ◽  
Water Vapor ◽  
Cotton Fabric ◽  
Structural Parameters ◽  
Water Vapor Permeability ◽  
Vapor Permeability

Relation of Water Vapor Permeability of Elastomers to Molecular Structure

1966 ◽  
Vol 39 (3) ◽  
pp. 751-754
Author(s):  
Y. Iyengar
Keyword(s):  
Molecular Structure ◽  
Water Vapor ◽  
Structural Parameters ◽  
Monomer Unit ◽  
Water Vapor Permeability ◽  
Styrene Butadiene Rubber ◽  
Vapor Permeability ◽  
Butadiene Rubber ◽  
Quantitative Correlation ◽  
Styrene Butadiene

Abstract This communication is a quantitative correlation of water vapor permeability of nonpolar elastomers with molecular structure. Permeability of physical blends and of composite layers of elastomers are also discussed. Permeability—Elastomer Structure.—Steric hindrance and unsaturation influence water vapor permeability of elastomers. The low permeability of isobutylene—isoprene (butyl) rubber is attributed to the presence of bulky methyl groups in its isobutylene component. The high unsaturation in isoprene and butadiene is blamed for the high permeability of natural rubber and styrene butadiene rubber. Hence, permeability should be correlated quantitatively with a factor which can evaluate and combine these two structural parameters. Defining the factors A and B to express the relative molar concentrations of unsaturated and steric groups in the average monomer unit of elastomers as (unsaturation) A=1+x/X (steric groups) B=1+y/Y

Layer by layer assembly of antibacterial inclusion complexes

2016 ◽  
Vol 28 (3) ◽  
pp. 368-377
Author(s):  
Sule Ugur ◽  
Merih Sarıışık ◽  
Gizem Türkoğlu ◽  
Gökhan Erkan ◽  
Emre Erden
Keyword(s):  
Water Vapor ◽  
Inclusion Complex ◽  
Cotton Fabric ◽  
Self Assembly ◽  
Water Vapor Permeability ◽  
Cotton Fabrics ◽  
Vapor Permeability ◽  
Layer By Layer ◽  
Content Type ◽  
Assembly Method

Purpose – The purpose of this paper is to create a textile material which shows antibacterial activity with resistance to environmental conditions by using volatile active agent inclusion complex and self-assembly method. Design/methodology/approach – An inclusion complex of carvacrol and β-CD is generated by kneading method and deposited on the cotton fabrics by using a nanofabrication method named as layer-by-layer (LbL) deposition method. Three different concentration of CD and CD:Car aqueous solutions were deposited on cotton fabrics. Attenuated total reflectance Fourier transform infrared spectroscopy (FTIR-ATR), scanning electron microscopy (SEM), antimicrobial efficacy test of fabrics against washing and some physical tests (water vapor permeability, air permeability) were performed on the fabrics before and after the treatment with CD to evaluate the effect of the LbL process on cotton fabric properties. Findings – The results showed that the coated fabrics with CD/CD:Car multilayer films enhanced the antimicrobial efficacy of cotton fabrics against to Klebsiella pneumonia and Staphylococus aureus bacteria. Air and water vapor permeability properties of the cotton fabric effected after the LbL deposition process sure enough. With SEM and FTIR-ATR analysis the CD:Car complex presence were verified. The durability of antibacterial properties were analyzed after one and ten washing (40°C and 30 min) cycles. Originality/value – This work provides a novel and simple method for CD and inclusion complex of carvacrol film deposition by self-assembly method on cotton fabrics and their application onto cotton fabrics to gain antibacterial property.

Ultraviolet blocking and antioxidant polyvinyl alcohol films incorporated with baicalin extraction from Scutellaria baicalensis Georgi

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Jinshu Liu ◽  
Xiaoyan Ma ◽  
Wenzhao Shi ◽  
Jianwei Xing ◽  
Chaoqun Ma ◽  
...  
Keyword(s):  
Water Vapor ◽  
Polyvinyl Alcohol ◽  
Radical Scavenging Activity ◽  
Antioxidant Properties ◽  
Radical Scavenging ◽  
Water Vapor Permeability ◽  
Scutellaria Baicalensis ◽  
Vapor Permeability ◽  
Protective Film ◽  
Uv Blocking

Abstract Baicalin, an active flavonoid ingredient of Scutellaria baicalensis Georgi, was extracted by heat reflux extraction and showed the same significance UV absorption property with standard baicalin. Active films were prepared from polyvinyl alcohol (PVA) containing baicalin extract by casting method. The effect of baicalin extracts on the UV-blocking, optical, antioxidant property, water vapor permeability, swelling and mechanical properties of the films were studied. UV–vis transmittance spectra showed that PVA films incorporated with baicalin extract blocked ultraviolet light range from 280–400 nm even with low concentration of baicalin (0.5 wt%) and maintain the high transparency in visible spectrum. The outstanding UV-blocking properties of PVA films incorporated with baicalin extract were also confirmed by Rhodamine B degradation. Baicalin conferred antioxidant properties to PVA films as determined by DPPH radical scavenging activity. Due to the interaction between hydroxy groups of baicalin and PVA molecule, water vapor permeability, swelling and elongation at break of the films were decreased accompanied with the increasing in tensile strength and Young’s modulus. FTIR reveal that the interaction between PVA molecules was significant changed by the introduction of baicalin. These results suggest that PVA film incorporated with baicalin extract can be used for the development of functional protective film.

scholarly journals The Effect of Extraction Conditions on the Barrier and Mechanical Properties of Kefiran Films

Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 602
Author(s):  
Carmen Rodica Pop ◽  
Teodora Emilia Coldea ◽  
Liana Claudia Salanţă ◽  
Alina Lăcrămioara Nistor ◽  
Andrei Borşa ◽  
...  
Keyword(s):  
Water Vapor ◽  
Conformational Changes ◽  
Water Vapor Permeability ◽  
Edible Films ◽  
Film Structure ◽  
Water Soluble ◽  
Vapor Permeability ◽  
Water Molecules ◽  
Compact Structure ◽  
Technology Applications

Kefiran is an exopolysaccharide classified as a heteropolysaccharide comprising glucose and galactose in equimolar quantities, and it is classified as a water-soluble glucogalactan. This work aimed to investigate the effect of different extraction conditions of kefiran on the structural and physical properties of the edible films obtained. Fourier-transform infrared spectroscopy and scanning electron microscopy were performed, together with a determinations of moisture content, solubility, water vapor permeability and degree of swelling. The kefiran films presented values of the water vapor permeability between 0.93 and 4.38 × 10−11 g/m.s.Pa. These results can be attributed to the development of a more compact structure, where glycerol had no power to increase the free volume and the water vapor diffusion through their structure. The possible conformational changes in the kefiran film structure, due to the interspersing of the plasticizers and water molecules that they absorb, could be the reason for producing flexible kefiran films in the case of using glycerol as a plasticizer at 7.5% w/w. Moreover, it was observed that the extraction conditions are a significant factor in the properties of these films and their food technology applications.

scholarly journals Development of PE/PCL Bilayer Films Modified with Casein and Aluminum Oxide

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3090
Author(s):  
Anita Ptiček Siročić ◽  
Ana Rešček ◽  
Zvonimir Katančić ◽  
Zlata Hrnjak-Murgić
Keyword(s):  
Mechanical Properties ◽  
Thermal Properties ◽  
Water Vapor ◽  
Aluminum Oxide ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Mechanical And Thermal Properties ◽  
Oxide Compound ◽  
Bilayer Films ◽  
Oxide Particles

The studied samples were prepared from polyethylene (PE) polymer which was coated with modified polycaprolactone (PCL) film in order to obtain bilayer films. Thin PCL film was modified with casein/aluminum oxide compound to enhance vapor permeability as well as mechanical and thermal properties of PE/PCL films. Casein/aluminum oxide modifiers were used in order to achieve some functional properties of polymer film that can be used in various applications, e.g., reduction of water vapor permeability (WVTR) and good mechanical and thermal properties. Significant improvement was observed in mechanical properties, especially in tensile strength as well as in water vapor values. Samples prepared with aluminum oxide particles indicated significantly lower values up to 60%, and samples that were prepared with casein and 5% Al2O3 showed the lowest WVTR value.

scholarly journals Upcycling of Vine Shoots: Production of Fillers for PHBV-Based Biocomposite Applications

2020 ◽  
Author(s):  
Grégoire David ◽  
Laurent Heux ◽  
Stéphanie Pradeau ◽  
Nathalie Gontard ◽  
Hélène Angellier-Coussy
Keyword(s):  
Water Vapor ◽  
Gas Phase ◽  
Mechanical Performance ◽  
Low Cost ◽  
Water Vapor Permeability ◽  
Contact Angles ◽  
Vapor Permeability ◽  
Water Contact ◽  
Median Diameter ◽  
Cost Of Materials

Abstract This paper aims at investigating the potential of vine shoots (ViSh) upcycling as fillers in novel poly(3-hydroxybutyrate-3-hydroxyvalerate) (PHBV) based biocomposites. ViSh particles of around 50 µm (apparent median diameter) were obtained combining dry grinding processes, and mixed with PHBV using melt extrusion. Thermal stability and elongation at break of biocomposites were reduced with increasing contents of ViSh particles (10, 20 and 30 wt%), while Young’s modulus and water vapor permeability were increased. It was shown that a surface gas-phase esterification allowed to significantly increase the hydrophobicity of ViSh particles (increase of water contact angles from 59° to 114°), leading to a reduction of 27% in the water vapor permeability of the biocomposite filled with 30 wt% of ViSh. The overall mechanical performance was not impacted by gas-phase esterification, demonstrating that the interfacial adhesion between the virgin ViSh particles and the PHBV matrix was already good and that such filler surface treatment was not required in that case. It was concluded that ViSh particles can be interestingly used as low cost fillers in PHBV-based biocomposites to decrease the overall cost of materials.

Water-vapor permeability control of PDMS by the dispersion of collagen powder

2009 ◽  
Vol 4 (3) ◽  
pp. 442-449 ◽  
Author(s):  
Yuhua Zhang ◽  
Masatoshi Ishida ◽  
Yutaka Kazoe ◽  
Yohei Sato ◽  
Norihisa Miki
Keyword(s):  
Water Vapor ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Collagen Powder

scholarly journals Incorporation of bentonite clay in cassava starch films for the reduction of water vapor permeability

2018 ◽  
Vol 105 ◽  
pp. 637-644 ◽  
Author(s):  
M.K.S. Monteiro ◽  
V.R.L. Oliveira ◽  
F.K.G. Santos ◽  
E.L. Barros Neto ◽  
R.H.L. Leite ◽  
...  
Keyword(s):  
Water Vapor ◽  
Water Vapor Permeability ◽  
Bentonite Clay ◽  
Cassava Starch ◽  
Vapor Permeability ◽  
Starch Films
Sign in / Sign up

Export Citation Format

Share Document