Simulation study on electric field of UHV transmission lines with different numbers of sub-conductors

2016 ◽  
Author(s):  
Li-qun Shang ◽  
Miao Li
Keyword(s):  
Electric Field ◽  
Simulation Study ◽  
Transmission Lines ◽  
Uhv Transmission Lines

An Electroscope System Based on Electric Field Measurement Method for UHV Transmission Lines

2009 ◽  
Vol 10 (2) ◽  
Author(s):  
Fan Yang ◽  
Wei He ◽  
Tao Chen ◽  
Xiaochu Luo ◽  
Yongchang Fu
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Transmission Lines ◽  
Field Measurement ◽  
Measurement Method ◽  
Electric Field Measurement ◽  
Set Up ◽  
Global Regularization ◽  
Uhv Transmission Lines ◽  
Internet Network

The paper describes an electric field measurement method based electroscope system to check the electrification state of ultra-high voltage transmission lines, which is composed of three parts: 1) Measuring terminal; 2) Central sever; 3) GPRS and Internet network. The measuring terminal was used to measure the electric field and the location of the measuring points, then the measured data was sent to the central sever by GPRS and Internet network, and requested for an electricity state confirmation.When the sever received a request from a terminal, the electric fields and locations of the measuring points were obtained first, then according to the location of the measuring points, the server searches the corresponding objective transmission lines in the database and read their parameters. According to the parameters of the measuring points and transmission lines, a calculation would be carried out to confirm the electrification state of the transmission lines. For the confirmation calculation, equations for the electric field inverse problem of the transmission lines were set up first, then global regularization and damped Gauss Newton (DGN) method were used to solve the inverse problem.A 500kV double loops transmission line was taken as an example to verify the validity of this method. The electric field and location of 11 measuring points were measured by the measuring terminal firstly, and then sent to the central sever. Electrification state was confirmed by the central sever.

scholarly journals Study of Non-contact Voltage Detector of 1000kV UHV AC Based on MEMS Electric Field Sensor

2018 ◽  
Vol 160 ◽  
pp. 02001
Author(s):  
Jianjun Zhu ◽  
Xinglie Lei ◽  
Ziming Su ◽  
Ting Liu ◽  
Kai Liu ◽  
...  
Keyword(s):  
Electric Field ◽  
Transmission Lines ◽  
Microelectromechanical Systems ◽  
Contact Voltage ◽  
Electric Field Sensor ◽  
Field Sensor ◽  
Working Principle ◽  
Uhv Transmission Lines

This paper expounds the working principle of non-contact voltage detector and the electric field sensor which made by the technology of microelectromechanical systems (MEMS), determined the requirements of the detecting area and the threshold of the detector through simulation, and correct the threshold by carrying out experiments, which shows that by setting the threshold of the detector at 25kV/m, when the detector is 10-15m away from the conductors, or 2m away from the tower toward the conductor at the tower body whereas the same high as the conductor or on the crossarm, the detector can effectively identify whether the conductor is power on or off. The MEMS no-contact voltage detector and the method put forward by this paper can solve the problem of voltage detecting on UHV transmission lines, which has wide popularization and application value.

Calculation of surface electric field on UHV transmission lines under lightning stroke

2013 ◽  
Vol 94 ◽  
pp. 79-85 ◽  
Author(s):  
Zhanqing Yu ◽  
Qian Li ◽  
Rong Zeng ◽  
Jinliang He ◽  
Yong Zhang ◽  
...  
Keyword(s):  
Electric Field ◽  
Transmission Lines ◽  
Lightning Stroke ◽  
Surface Electric Field ◽  
Uhv Transmission Lines

scholarly journals Trade-Off between Operating Time and Energy Consumption in Pulsed Electric Field Electrodialysis: A Comprehensive Simulation Study

Membranes ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 43
Author(s):  
Manuel César Martí-Calatayud ◽  
Mario Sancho-Cirer Poczatek ◽  
Valentín Pérez-Herranz
Keyword(s):  
Energy Consumption ◽  
Electric Field ◽  
Simulation Study ◽  
Specific Energy ◽  
Operating Time ◽  
Specific Energy Consumption ◽  
Threshold Value ◽  
Pulsed Electric Field ◽  
Pulse Frequency ◽  
Time And Energy

Electrodialysis (ED) has been recently introduced in a variety of processes where the recovery of valuable resources is needed; thus, enabling sustainable production routes for a circular economy. However, new applications of ED require optimized operating modes ensuring low energy consumptions. The application of pulsed electric field (PEF) electrodialysis has been demonstrated to be an effective option to modulate concentration polarization and reduce energy consumption in ED systems, but the savings in energy are usually attained by extending the operating time. In the present work, we conduct a comprehensive simulation study about the effects of PEF signal parameters on the time and energy consumption associated with ED processes. Ion transport of NaCl solutions through homogeneous cation-exchange membranes is simulated using a 1-D model solved by a finite-difference method. Increasing the pulse frequency up to a threshold value is effective in reducing the specific energy consumption, with threshold frequencies increasing with the applied current density. Varying the duty cycle causes opposed effects in the time and energy usage needed for a given ED operation. More interestingly, a new mode of PEF functions with the application of low values of current during the relaxation phases has been investigated. This novel PEF strategy has been demonstrated to simultaneously improve the time and the specific energy consumption of ED processes.

Sign in / Sign up

Export Citation Format

Share Document