Multi-Objective Optimal Power Flow of Multiple-Energy System Considering Wind Power Penetration

Author(s):  
Rui Ma ◽  
Jiaqian Qin
2018 ◽  
Vol 7 (4) ◽  
pp. 2766 ◽  
Author(s):  
S. Surender Reddy

This paper solves a multi-objective optimal power flow (MO-OPF) problem in a wind-thermal power system. Here, the power output from the wind energy generator (WEG) is considered as the schedulable, therefore the wind power penetration limits can be determined by the system operator. The stochastic behavior of wind power and wind speed is modeled using the Weibull probability density function. In this paper, three objective functions i.e., total generation cost, transmission losses and voltage stability enhancement index are selected. The total generation cost minimization function includes the cost of power produced by the thermal and WEGs, costs due to over-estimation and the under-estimation of available wind power. Here, the MO-OPF problems are solved using the multi-objective glowworm swarm optimiza-tion (MO-GSO) algorithm. The proposed optimization problem is solved on a modified IEEE 30 bus system with two wind farms located at two different buses in the system.  


2016 ◽  
Vol 94 ◽  
pp. 10-21 ◽  
Author(s):  
S. Shargh ◽  
B. Khorshid ghazani ◽  
B. Mohammadi-ivatloo ◽  
H. Seyedi ◽  
M. Abapour

2021 ◽  
pp. 0309524X2199277
Author(s):  
Hongfen Zhang ◽  
Youchao Zhang

Aiming at the influence of the uncertainty of power system operating parameters such as wind power fluctuation on AC-DC hybrid system, an interval optimal power flow calculation method based on interval and affine arithmetic is proposed in this paper. First, AC and DC interval power flow model is constructed based on the relationship between interval and affine arithmetic, and the uncertainties such as the new energy generation output of the system are expressed as interval variables; static security performance index (PI) is introduced in AC-DC multi-objective optimal power flow objective functions, which take the system’s power generation cost and network loss into account; the Pareto optimal solution set is distributed uniformly in space by using the particle swarm algorithm to solve the interval optimal power flow model. Finally, MATLAB simulation examples are used to verify that the method can optimize the system’s power generation cost, network loss and static safety index while considering wind power fluctuation.


2020 ◽  
Vol 12 (12) ◽  
pp. 31-43
Author(s):  
Tatiana A. VASKOVSKAYA ◽  
◽  
Boris A. KLUS ◽  

The development of energy storage systems allows us to consider their usage for load profile leveling during operational planning on electricity markets. The paper proposes and analyses an application of an energy storage model to the electricity market in Russia with the focus on the day ahead market. We consider bidding, energy storage constraints for an optimal power flow problem, and locational marginal pricing. We show that the largest effect for the market and for the energy storage system would be gained by integration of the energy storage model into the market’s optimization models. The proposed theory has been tested on the optimal power flow model of the day ahead market in Russia of 10000-node Unified Energy System. It is shown that energy storage systems are in demand with a wide range of efficiencies and cycle costs.


2018 ◽  
Vol 24 (3) ◽  
pp. 84
Author(s):  
Hassan Abdullah Kubba ◽  
Mounir Thamer Esmieel

Nowadays, the power plant is changing the power industry from a centralized and vertically integrated form into regional, competitive and functionally separate units. This is done with the future aims of increasing efficiency by better management and better employment of existing equipment and lower price of electricity to all types of customers while retaining a reliable system. This research is aimed to solve the optimal power flow (OPF) problem. The OPF is used to minimize the total generations fuel cost function. Optimal power flow may be single objective or multi objective function. In this thesis, an attempt is made to minimize the objective function with keeping the voltages magnitudes of all load buses, real output power of each generator bus and reactive power of each generator bus within their limits. The proposed method in this thesis is the Flexible Continuous Genetic Algorithm or in other words the Flexible Real-Coded Genetic Algorithm (RCGA) using the efficient GA's operators such as Rank Assignment (Weighted) Roulette Wheel Selection, Blending Method Recombination operator and Mutation Operator as well as Multi-Objective Minimization technique (MOM). This method has been tested and checked on the IEEE 30 buses test system and implemented on the 35-bus Super Iraqi National Grid (SING) system (400 KV). The results of OPF problem using IEEE 30 buses typical system has been compared with other researches.     


Sign in / Sign up

Export Citation Format

Share Document