Current Density-Voltage and Capacitance-Voltage Characteristics of Pulsed Laser Deposited Nitrogen-Doped n-Carbon/p-Silicon Diode

2006 ◽  
Author(s):  
M. Z. Islam ◽  
S. M Mominuzzaman ◽  
T. Soga ◽  
T. Jimbo
Keyword(s):  
Current Density ◽  
Pulsed Laser ◽  
Nitrogen Doped ◽  
Silicon Diode ◽  
Capacitance Voltage

Structural and Magneto-Electric Properties of Pulsed Laser Deposited Ferroelectric/Ferromagnetic Heterostructure

2009 ◽  
Vol 1199 ◽  
Author(s):  
Ricardo Martinez ◽  
Ashok Kumar ◽  
Ratnakar Palai ◽  
Ram S. Katiyar
Keyword(s):  
Elevated Temperatures ◽  
High Strain ◽  
Ferroelectric Properties ◽  
Pulsed Laser ◽  
Ferromagnetic Behavior ◽  
Asymmetric Behavior ◽  
Normal Behavior ◽  
Wide Range ◽  
Capacitance Voltage ◽  
Voltage Relationship

AbstractAsymmetric superlattices (SLs) with ferromagnetic La0.7Sr0.3MnO3 (LSMO) and ferroelectric Ba0.7Sr0.3TiO3 (BST) as constitutive layers were fabricated on conducting LaNiO3 (LNO) coated (001) oriented MgO substrates using pulsed laser deposition (PLD). The crystallinity, ferroelectric and magnetic properties of the SLs were studied over a wide range of temperatures and frequencies. The structure exhibited ferromagnetic behavior at 300K, and ferroelectric behavior over a range of temperatures between 100K and 300K. The dielectric response as a function of frequency obeys normal behavior below 300 K, whereas it follows Maxwell–Wagner model at elevated temperatures. The effect of ferromagnetic LSMO layers on ferroelectric properties of the SL indicated strong influence of the interfaces. The asymmetric behavior of ferroelectric loop and the capacitance-voltage relationship suggest development of a built field in the SLs due to high strain across the interfaces.

Characterization of superconducting SmBa2Cu3O7 films grown by pulsed laser deposition

2002 ◽  
Vol 17 (10) ◽  
pp. 2599-2603 ◽  
Author(s):  
Q. X. Jia ◽  
S. R. Foltyn ◽  
J. Y. Coulter ◽  
J. F. Smith ◽  
M. P. Maley
Keyword(s):  
Transition Temperature ◽  
Critical Current Density ◽  
Pulsed Laser Deposition ◽  
Critical Current ◽  
Current Density ◽  
Deposition Temperature ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
Superconducting Transition ◽  
Transition Width

We have investigated epitaxial superconducting SmBa2Cu3O7 (Sm123) films grown by pulsed-laser deposition on single-crystal SrTiO3 substrates. The deposition temperature plays an important role in determining the superconducting properties of Sm123 films. The superconducting transition temperature increases with the deposition temperature whereas the transition width decreases at deposition temperatures in the range of 700–875 °C. A Sm123 film deposited at 850 °C exhibits a transition temperature above 93 K with a transition width less than 0.5 K. Even though Sm123 films exhibit a higher transition temperature than Yba2Cu3O7 (Y123), the Sm123 shows lower critical current density at liquid-nitrogen temperature. The nominal critical current density of Sm123 film is less than 1 MA/cm2 at 75.4 K. Nevertheless, the Sm123 films have less anisotropy and stronger pinning characteristics compared to Y123. They are also much smoother with fewer particulates, as revealed by scanning electron microscopy.

YBa2Cu3O7-y−coated conductors with high engineering current density

2000 ◽  
Vol 15 (12) ◽  
pp. 2647-2652 ◽  
Author(s):  
M. Paranthaman ◽  
C. Park ◽  
X. Cui ◽  
A. Goyal ◽  
D. F. Lee ◽  
...  
Keyword(s):  
Pulsed Laser Deposition ◽  
Critical Current ◽  
Current Density ◽  
Ybco Film ◽  
Pulsed Laser ◽  
Coated Conductors ◽  
Laser Deposition ◽  
Ex Situ ◽  
Layer Sequence ◽  
Ybco Coated Conductors

Short segments of YBa2Cu3O7-y (YBCO) coated conductors were fabricated on rolling-assisted biaxially textured substrates (RABiTS) with a layer sequence of CeO2/YSZ/Ni using an ex situ BaF2 precursor process. Pulsed laser deposition (PLD) was used to deposit both YSZ and CeO2 layers. The YBCO films were grown using e-beam coevaporated Y–BaF2–Cu precursors followed by postannealing. An overall engineering current density, JE, of 28,000 A/cm2 and critical current, Ic, of 147 A/cm width at 77 K were achieved for a 1.6-μm-thick YBCO film. This result demonstrates the possibility of using both the ex situ BaF2 precursor approach and the RABiTS process for producing long lengths of high-JE coated conductors.

The Dielectric Properties of Pb0.65Ba0.35ZrO3 Thin Films

2006 ◽  
Vol 306-308 ◽  
pp. 1313-1318
Author(s):  
J.S. Kim ◽  
B.H. Park ◽  
T.J. Choi ◽  
Se Hyun Shin ◽  
Jae Chul Lee ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Dielectric Properties ◽  
Dielectric Loss ◽  
Deposition Temperature ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
Axis Orientation ◽  
Capacitance Voltage ◽  
Bst Thin Film

Pb0.65Ba0.35ZrO3 (PBZ) thin films have been grown on MgO (001) substrates by pulsed-laser deposition (PLD). We have compared the structural and dielectric properties of PBZ films grown at various temperatures. A highly c-axis orientation has appeared at PBZ film grown at the deposition temperature of 550oC. The c-axis oriented PBZ film has also shown the largest tunability among all the PBZ films in capacitance-voltage measurements. The tunability and dielectric loss of the PBZ film was 20% and 0.00959, respectively. In addition, we have compared the temperature coefficient of capacitance (TCC) of a PBZ film with that of a Ba0.5Sr0.5TiO3 (BST) film which is a well-known material applicable to tunable microwave devices. We have confirmed that TCC value of a PBZ thin film was three-times smaller than that of a BST thin film.

scholarly journals Reactive laser synthesis of nitrogen-doped hybrid graphene-based electrodes for energy storage

2018 ◽  
Vol 6 (33) ◽  
pp. 16074-16086 ◽  
Author(s):  
Ángel Pérez del Pino ◽  
Andreu Martínez Villarroya ◽  
Alex Chuquitarqui ◽  
Constantin Logofatu ◽  
Dino Tonti ◽  
...  
Keyword(s):  
Energy Storage ◽  
Pulsed Laser ◽  
Inverse Matrix ◽  
Laser Evaporation ◽  
Laser Synthesis ◽  
Evaporation Method ◽  
Nitrogen Doped ◽  
Electrodes For Supercapacitors

A reactive inverse matrix assisted pulsed laser evaporation method was used for the fabrication of hybrid graphene-based electrodes for supercapacitors.

scholarly journals Electroanalytical Performance of Nitrogen-Doped Graphene Films Processed in One Step by Pulsed Laser Deposition Directly Coupled with Thermal Annealing

Materials ◽  
2019 ◽  
Vol 12 (4) ◽  
pp. 666 ◽  
Author(s):  
Florent Bourquard ◽  
Yannick Bleu ◽  
Anne-Sophie Loir ◽  
Borja Caja-Munoz ◽  
José Avila ◽  
...  
Keyword(s):  
High Temperature ◽  
Pulsed Laser Deposition ◽  
Graphene Film ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
Synthesis Process ◽  
Nitrogen Doped ◽  
Nitrogen Doped Graphene ◽  
Doped Graphene ◽  
One Step

Graphene-based materials are widely studied to enable significant improvements in electroanalytical devices requiring new generations of robust, sensitive and low-cost electrodes. In this paper, we present a direct one-step route to synthetize a functional nitrogen-doped graphene film onto a Ni-covered silicon electrode substrate heated at high temperature, by pulsed laser deposition of carbon in the presence of a surrounding nitrogen atmosphere, with no post-deposition transfer of the film. With the ferrocene methanol system, the functionalized electrode exhibits excellent reversibility, close to the theoretical value of 59 mV, and very high sensitivity to hydrogen peroxide oxidation. Our electroanalytical results were correlated with the composition and nanoarchitecture of the N-doped graphene film containing 1.75 at % of nitrogen and identified as a few-layer defected and textured graphene film containing a balanced mixture of graphitic-N and pyrrolic-N chemical functions. The absence of nitrogen dopant in the graphene film considerably degraded some electroanalytical performances. Heat treatment extended beyond the high temperature graphene synthesis did not significantly improve any of the performances. This work contributes to a better understanding of the electrochemical mechanisms of doped graphene-based electrodes obtained by a direct and controlled synthesis process.

scholarly journals FeNC catalysts for CO2 electroreduction to CO: effect of nanostructured carbon supports

2019 ◽  
Vol 3 (7) ◽  
pp. 1833-1840 ◽  
Author(s):  
Dilan Karapinar ◽  
Ngoc-Huan Tran ◽  
Domitille Giaume ◽  
Nastaran Ranjbar ◽  
Frédéric Jaouen ◽  
...  
Keyword(s):  
Carbon Nanofibers ◽  
Current Density ◽  
Carbon Materials ◽  
Nanostructured Carbon ◽  
Carbon Supports ◽  
Nitrogen Doped ◽  
Co2 Electroreduction ◽  
Nitrogen Doped Carbon

Iron- and nitrogen-doped carbon materials (FeNC) are excellent catalysts for CO2 electroreduction to CO. Current density and selectivity can be significantly improved by mixing FeNC with carbon materials such as carbon nanofibers.

Sign in / Sign up

Export Citation Format

Share Document