Research on the degree of freedom control strategy for redundant-drive shaking tables

2015 ◽  
Author(s):  
Lianpeng Zhang ◽  
Yu Yang ◽  
Chifu Yang ◽  
Junwei Han
Keyword(s):  
Control Strategy ◽  
Degree Of Freedom ◽  
Redundant Drive

Iterative feedback control based on frequency response model for a six-degree-of-freedom micro-vibration platform

2021 ◽  
pp. 107754632199731
Author(s):  
He Zhu ◽  
Shuai He ◽  
Zhenbang Xu ◽  
XiaoMing Wang ◽  
Chao Qin ◽  
...  
Keyword(s):  
Feedback Control ◽  
Frequency Response ◽  
Control Strategy ◽  
Degree Of Freedom ◽  
Small Displacement ◽  
Response Model ◽  
Parameter Uncertainties ◽  
Micro Vibration ◽  
Six Degree Of Freedom ◽  
Iterative Feedback

In this article, a six-degree-of-freedom (6-DOF) micro-vibration platform (6-MVP) based on the Gough–Stewart configuration is designed to reproduce the 6-DOF micro-vibration that occurs at the installation surfaces of sensitive space-based instruments such as large space optical loads and laser communications equipment. The platform’s dynamic model is simplified because of the small displacement characteristics of micro-vibrations. By considering the multifrequency line spectrum characteristics of micro-vibrations and the parameter uncertainties, an iterative feedback control strategy based on a frequency response model is designed, and the effectiveness of the proposed control strategy is verified by performing integrated simulations. Finally, micro-vibration experiments are performed with a 10 kg load on the platform. The results of these micro-vibration experiments show that after several iterations, the amplitude control errors are less than 3% and the phase control errors are less than 1°. The control strategy presented in this article offers the advantages of a simple algorithm and high precision and it can also be used to control other similar micro-vibration platforms.

scholarly journals New time delay estimation-based virtual decomposition control for n-DoF robot manipulator

2021 ◽  
Vol 10 (3) ◽  
pp. 192
Author(s):  
Hachmia Faqihi ◽  
Khalid Benjelloun ◽  
Maarouf Saad ◽  
Mohammed Benbrahim ◽  
M. Nabil Kabbaj
Keyword(s):  
Time Delay ◽  
Dynamic Model ◽  
Control Strategy ◽  
Robot Manipulator ◽  
Time Delay Estimation ◽  
Lyapunov Theory ◽  
Degree Of Freedom ◽  
Delay Estimation ◽  
The Stability

<p>One of the most efficient approaches to control a multiple degree-of-freedom robot manipulator is the virtual decomposition control (VDC). However, the use of the re- gressor technique in the conventionnal VDC to estimate the unknown and uncertaities parameters present some limitations. In this paper, a new control strategy of n-DoF robot manipulator, refering to reorganizing the equation of the VDC using the time delay estimation (TDE) have been investigated. In the proposed controller, the VDC equations are rearranged using the TDE for unknown dynamic estimations. Hence, the decoupling dynamic model for the manipulator is established. The stability of the overall system is proved based on Lyapunov theory. The effectiveness of the proposed controller is proved via case study performed on 7-DoF robot manipulator and com- pared to the conventionnal Regressor-based VDC according to some evalution criteria. The results carry out the validity and efficiency of the proposed time delay estimation- based virtual decomposition controller (TD-VDC) approach.</p>

scholarly journals Control of Near-Grazing Dynamics in the Two-Degree-of-Freedom Vibroimpact System with Symmetrical Constraints

Complexity ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Zihan Wang ◽  
Jieqiong Xu ◽  
Shuai Wu ◽  
Quan Yuan
Keyword(s):  
Control Strategy ◽  
Stability Criterion ◽  
Control Method ◽  
Degree Of Freedom ◽  
Local Analysis ◽  
Grazing Bifurcation ◽  
Vibroimpact System ◽  
The Stability ◽  
Two Parameters ◽  
Two Degree Of Freedom

The stability of grazing bifurcation is lost in three ways through the local analysis of the near-grazing dynamics using the classical concept of discontinuity mappings in the two-degree-of-freedom vibroimpact system with symmetrical constraints. For this instability problem, a control strategy for the stability of grazing bifurcation is presented by controlling the persistence of local attractors near the grazing trajectory in this vibroimpact system with symmetrical constraints. Discrete-in-time feedback controllers designed on two Poincare sections are employed to retain the existence of an attractor near the grazing trajectory. The implementation relies on the stability criterion under which a local attractor persists near a grazing trajectory. Based on the stability criterion, the control region of the two parameters is obtained and the control strategy for the persistence of near-grazing attractors is designed accordingly. Especially, the chaos near codimension-two grazing bifurcation points was controlled by the control strategy. In the end, the results of numerical simulation are used to verify the feasibility of the control method.

Analysis of Hand-Arm Coordinate Motion on Constraint Tasks

1991 ◽  
Vol 3 (6) ◽  
pp. 497-505
Author(s):  
Shigeki Sugano ◽  
◽  
Hideyo Namimoto ◽  
Ichiro Kato
Keyword(s):  
Control Strategy ◽  
Force Control ◽  
Degrees Of Freedom ◽  
Control Mechanism ◽  
Human Motion ◽  
Degree Of Freedom ◽  
Human Hand ◽  
Human Motion Analysis ◽  
Manipulator Control ◽  
Arm Coordination

This research was conducted to study the control strategy of manipulator based on clarifying the force control mechanism of the human hand-arm by analyzing human constraint tasks with respect to biomechanism. In this paper; we describe an investigation of hand-arm function share. In addition, we apply hand-arm coordination to manipulator control using experimental results of analyzing the human tasks of moving bead balls on a shaft, which is an example of a constraint task with one degree of freedom (d.o.f.). In the human motion analysis, 6 axes of force on the task object are measured and compared in the case of constraining the hands degree of freedom and making hand free as well as in the case of with or without forced displacement along the translational direction during motion. As a result, we found that human work was performed smoothly through absorption of rotational force using hand d.o.f. and translational force using arm d.o.f. Also, it was found that there are the direction of motion and the posture easily absorbable translational force. Finally, we propose to apply the human hand-arm coordination compliance control strategy setting translational compliance by arms and rotational compliance by hands, to manipulator with more than 7 degrees of freedom. Thus, the setting of optional compliance applicable to circumstance and the resulting force control due to this become possible.

PD Control Strategy Design and Simulation of Magnetic Bearing with Single Freedom of Degree

2013 ◽  
Vol 760-762 ◽  
pp. 1207-1211 ◽  
Author(s):  
Guang Yang ◽  
Jian Min Zhang
Keyword(s):  
Control Strategy ◽  
Magnetic Bearing ◽  
Degree Of Freedom ◽  
Pd Control ◽  
Single Degree Of Freedom ◽  
Single Degree ◽  
Unstable Plant ◽  
Strategy Design ◽  
The Given ◽  
Bearing System

Based on the analysis of the model of the Single-Degree-of-Freedom (SDF) magnetic bearing system, the issue of design and simulation of PD control strategy in the system is investigated. First, the plant model of the AMB (Active Magnetic Bearings) with Single-Degree-of-Freedom (SDF) is found out to be unstable plant. Then, based on the root locus theory and Routh stability criteria, the necessity of derivation action in the controller is analyzed.In addition, the PD control strategy for a particular plant is designed, the effectiveness of which is validated by the given simulation examples. The proposed approach can provide an important reference for the practical application of PD control strategy in the magnetic bearing system.

scholarly journals Estimated Reaction Force-Based Bilateral Control between 3DOF Master and Hydraulic Slave Manipulators for Dismantlement

Electronics ◽  
2018 ◽  
Vol 7 (10) ◽  
pp. 256 ◽  
Author(s):  
Karam Kallu ◽  
Jie Wang ◽  
Saad Abbasi ◽  
Min Lee
Keyword(s):  
Sliding Mode Control ◽  
Control Strategy ◽  
Sliding Mode ◽  
Reaction Force ◽  
Servo System ◽  
Degree Of Freedom ◽  
Bilateral Control ◽  
Impedance Model ◽  
Hydraulic Servo ◽  
Hydraulic Servo System

This paper proposes a novel bilateral control design based on an estimated reaction force without a force sensor for a three-degree of freedom hydraulic servo system with master–slave manipulators. The proposed method is based upon sliding mode control with sliding perturbation observer (SMCSPO) using a bilateral control environment. The sliding perturbation observer (SPO) estimates the reaction force at the end effector and second link without using any sensors. The sliding mode control (SMC) is used as a bilateral controller for the robust position tracking and control of the slave device. A bilateral control strategy in a hydraulic servo system provides robust position and force tracking between master and slave. The difference between the reaction force of the slave produced by the effect of the remote environment and the operating force applied to the master by the operator is expressed in the target impedance model. The impedance model is applied to the master and allows the operator to feel the reaction force from the environment. This research experimentally verifies that the slave device can follow the trajectory of the master device using the proposed bilateral control strategy based on the estimated reaction force. This technique will be convenient for three or more degree of freedom (DOF) hydraulic servo systems used in dismantling nuclear power plants. It is worthy to mention that a camera is used for visual feedback on the safety of the environment and workspace.

Sign in / Sign up

Export Citation Format

Share Document