Full-Wave FDTD Analysis of UWB Pulses on Printed Coupled Lines

2006 ◽  
Author(s):  
Shahid Ahmed ◽  
Alexander Schuchinsky
Keyword(s):  
Full Wave ◽  
Coupled Lines

Compact filtering power dividers with wide upper stopband

2019 ◽  
Vol 11 (08) ◽  
pp. 765-773
Author(s):  
Gaoya Dong ◽  
Weimin Wang ◽  
Yuanan Liu
Keyword(s):  
Transmission Lines ◽  
Wave Transmission ◽  
Coupling Matrix ◽  
Power Dividers ◽  
Full Wave ◽  
Half Wave ◽  
Coupled Lines ◽  
Quarter Wave ◽  
Simulation Results ◽  
Good Agreement

AbstractA series of compact filtering power dividers (FPDs) with simple layouts are proposed based on coupling topology. The structure of the presented FPD1 is composed of three resonators and one isolating resistor. These FPDs can be designed based on coupling matrix filter theory. A half-wave transmission line is employed in FPD2 to introduce a transmission zero (TZ) locating at 1.27f0. The FPD3 is designed by replacing quarter-wave transmission lines in FPD2 with quarter-wave coupled lines, which will produce a TZ locating at 1.96 f0 and extend upper stopband bandwidth. For verification, three FPDs centered at 2.45 GHz are fabricated and measured. All measured results are in good agreement with the full-wave simulation results.

A Novel Small-Size Coupled-Line Wilkinson Power Divider for Dual-Band Applications

2013 ◽  
Vol 437 ◽  
pp. 1066-1072 ◽  
Author(s):  
Wei Min Wang ◽  
Yuan An Liu
Keyword(s):  
Design Theory ◽  
Power Divider ◽  
Dual Band ◽  
Coupled Line ◽  
Power Dividers ◽  
Full Wave ◽  
Coupled Lines ◽  
Parameters Analysis ◽  
Wilkinson Power Dividers ◽  
Circuit Configuration

A novel coupled-line circuit configuration is proposed to design small-size dual-band Wilkinson power dividers. This proposed power divider consists of three sections of coupled lines and two isolation resistors. The analytical design theory is given and the electrical parameters analysis is provided. Six numerical examples are presented to demonstrate the flexible dual-band applications. To avoid a negative isolation resistor, a practical power divider operating at 1GHz and 2.2GHz with two positive-value resistors is designed. The calculated and full-wave simulated results verify our proposed idea. Keywords: Coupled-line, dual-band, power divider.

Analysis of AC-DC Converter Circuit Performance with Difference Piezoelectric Transducer Array Connection

2020 ◽  
Vol 12 (7) ◽  
Author(s):  
Nik Ahmad Zainal Abidin ◽  
◽  
Norkharziana Mohd Nayan ◽  
Azuwa Ali ◽  
N. A. Azli ◽  
...  
Keyword(s):  
Piezoelectric Transducer ◽  
Simulation Analysis ◽  
Piezoelectric Sensor ◽  
Transducer Array ◽  
Circuit Performance ◽  
Array Configuration ◽  
Full Wave ◽  
Bridge Rectifier ◽  
In Series ◽  
Parallel Voltage

This research presents a simulation analysis for the AC-DC converter circuit with a different configurations of the array connection of the piezoelectric sensor. The selection of AC-DC converter circuits is full wave bridge rectifier (FWBR), parallel SSHI (P-SSHI) and parallel voltage multiplier (PVM) with array configuration variation in series (S), parallel (P), series-parallel (SP) and parallel-series (PS). The system optimizes with different load configurations ranging from 10 kΩ to 1 MΩ. The best configuration of AC-DC converter with an appropriate array piezoelectric connection producing the optimum output of harvested power is presented. According to the simulation results, the harvested power produced by using P-SSHI converter connected with 3 parallel piezoelectric transducer array was 85.9% higher than for PVM and 15.88% higher than FWBR.

Sign in / Sign up

Export Citation Format

Share Document