Wideband radiating element for mobile handsets for European antenna software benchmarking in ACE network

2006 ◽  
Author(s):  
Jean-Marc Ribero ◽  
Robert Staraj ◽  
Jean-Lou Dubard ◽  
Philippe LeThuc ◽  
Sylvain Collardey ◽  
...  
Keyword(s):  
Radiating Element

FSS-based triplate antenna design concept for wireless devices

2021 ◽  
pp. 1-10
Author(s):  
Ashwini Kotrashetti ◽  
B. K Lande ◽  
Ajay Poddar
Keyword(s):  
Design Methodology ◽  
Design Concept ◽  
Strong Interactions ◽  
Proof Of Concept ◽  
Wireless Devices ◽  
Multiple Frequency ◽  
Modeling And Analysis ◽  
Multiband Antennas ◽  
Mode Behavior ◽  
Radiating Element

Abstract Conventional multiband antennas suffer from strong interactions among different operating frequencies, complex configurations, low bandwidth, and reduced efficiencies. A design concept for a multibeam multiband antenna in wireless devices is proposed in this paper. The design concept provides a promising approach to augment transmission and reception. The principle of design involves a primary radiating element embedded in a triplate conformation which excites a passive array of multiple frequency secondary radiators, forming a frequency selective structure in triplate (FSST). The higher order mode behavior of the parent antenna characterizes the design of FSST placed in its nearfield. The mathematical modeling and analysis of the design methodology is also presented. As proof of concept, the proposed design methodology is validated with simulations and experiments at four unlicensed communication bands and the results are compared.

A compact dual port UWB-MIMO/diversity antenna for indoor application

2017 ◽  
Vol 10 (3) ◽  
pp. 360-367 ◽  
Author(s):  
Sonika Priyadarsini Biswal ◽  
Sushrut Das
Keyword(s):  
Mimo System ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Open Circuit ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Good Prospect ◽  
Mimo Antenna ◽  
Radiating Element ◽  
Input Multiple Output

A compact printed quadrant shaped monopole antenna is introduced in this paper as a good prospect for ultra wideband- multiple-input multiple-output (UWB-MIMO) system. The proposed MIMO antenna comprises two perpendicularly oriented monopoles to employ polarization diversity. An open circuit folded stub is extended from the ground plane of each radiating element to enhance the impedance bandwidth satisfying the UWB criteria. Two ‘L’ shaped slots are further etched on the radiator to provide good isolation performance between two radiators. The desirable radiator performances and diversity performances are ensured by simulation and/or measurement of the reflection coefficient, radiation pattern, realized peak gain, envelope correlation coefficient (ECC), diversity gain, mean effective gain (MEG) ratio and channel capacity loss (CCL). Results indicate that the proposed antenna exhibits 2.9–11 GHz 10 dB return loss bandwidth, mutual coupling <−20 dB, ECC < 0.003, MEG ratio ≈ 1, and CCL < 0.038 Bpsec/Hz, making it a good candidate for UWB and MIMO diversity application.

Improving the accuracy of the synthesis of the amplitude-phase distribution in an antenna array with an arbitrary geometry

2021 ◽  
Author(s):  
D.D. Gabrielyan ◽  
Dan.S. Fedorov ◽  
Den.S. Fedorov
Keyword(s):  
Antenna Arrays ◽  
Phase Distribution ◽  
Problem Statement ◽  
Arbitrary Geometry ◽  
Radiating Element ◽  
Path Measurement ◽  
The One ◽  
The Given ◽  
Single Approach

Problem statement. One of the constructing antenna arrays (AA) topic is related to the determination of complex amplitudes at the input of the antenna-feeder path, which, taking into account the distortions introduced by the its, ensure the formation of an amplitude-phase distribution (APD), in which the formed DP differed minimally from the set one. The statement of the problem assumes the known number and coordinates of the location of the emitters, the DP of the radiating element in the composition of the radiating opening, a given radiation pattern. It is required to form an APD in a given opening of the AA, which ensures the formation of a DP that has a minimum deviation from the specified one. To solve the problem, the following algorithm is proposed: determination of the APD at the input of the antenna-feeder path, which ensures the formation of a given DP in the absence of distortions introduced by the antenna-feeder path; measurement for the selected directions of the generated DP with the selected APD in the presence of APD distortions introduced by the antenna-feeder path; formation of a refined APD that ensures the fulfillment of required condition in the presence of distortions introduced by the antenna-feeder path of the AA. Objective. Minimize the root-mean-square deviation of the generated PD from the one specified for the AP with the opening of an arbitrary geometry. Results. The results obtained showed: The formulation of the problem of synthesis of the APD allows us to consider, within the framework of a single approach, AA with different geometries, including AA with a non-planar radiating opening, no restrictions are imposed on the shape of the boundary, and linear (quasi-ring) AA, the emitters of which are located along an arbitrary mane. Using the proposed algorithm for the synthesis of APD, which includes three main stages: the formation of APD for a given DP; measurement of complex values of the generated DP; refinement of the APD by determining the corrections while minimizing the standard deviation (SD) between the specified and formed at the first stage of the DP, allows us to form an APD that provides a minimum SD between the specified and formed DP. The performed studies have shown that when choosing the number of angular directions in each plane, comparable to the number of emitters in this plane, there is a large difference between the given and formed DP. When the number of angular directions for measuring the DP is approximately three times greater than the number of emitters in a given plane, the SD between the specified and formed DP is close to the minimum value and practically does not change with further increase.

A Circularly Polarized, Flexible and Compact Quad-Band Wearable Antenna for Off-Body Communication Applications

2021 ◽  
Author(s):  
Anil Badisa ◽  
B T P Madhav ◽  
B Prudhvi Nadh
Keyword(s):  
Simulation Environment ◽  
Circularly Polarized ◽  
Radiation Properties ◽  
Radiating Element ◽  
Textile Antenna ◽  
Polarization Characteristics ◽  
Stable Performance ◽  
The Impact ◽  
Triple Band ◽  
Polarized Radiation

A compact wearable textile antenna with multiband and circular polarization characteristics is proposed in this work for Wireless Body Area Networks (WBAN). An asymmetrically connected vertical stub as a radiator with the partial ground for quad-band (3.03–3.76[Formula: see text]GHz, 5.48–6.24[Formula: see text]GHz, 7.10–7.40[Formula: see text]GHz, 7.93–8.22[Formula: see text]GHz) operation and horizontal stubs on the radiator with L-slots in the ground is proposed for the triple band (3.16–3.22[Formula: see text]GHz, 7.25–7.36[Formula: see text]GHz and 7.93–8.08[Formula: see text]GHz) circularly polarized radiation. Jeans fabric is used as substrate with dielectric constant [Formula: see text] and loss tangent ([Formula: see text]). The dimensions of the proposed antenna are [Formula: see text][Formula: see text]mm3. Various conductive fabrics are investigated and analyzed as a radiating element. The proposed jeans antenna provides the gain ([Formula: see text] dB) and radiation efficiency ([Formula: see text]%) for all operating bands. The impact of the human body right arm loading on the antenna has been presented in terms of the reflection coefficient ([Formula: see text]) and gain using the CST Microwave studio simulation environment. The proposed antenna provides stable performance under bending conditions and the SAR values that are under acceptable limits ([Formula: see text][Formula: see text]W/kg for 10[Formula: see text]g of tissue). The flexibility, compactness and radiation properties make it suitable as a wearable textile antenna for off-body communication applications.

Application of Ferroelectrics in Low-Cost Microwave Phased-Array Antennas

2002 ◽  
Vol 720 ◽  
Author(s):  
J. B. L. Rao ◽  
D. P. Patel ◽  
P. K. Park ◽  
T. K. Dougherty ◽  
J. A. Zelik ◽  
...  
Keyword(s):  
Phase Shifter ◽  
Phased Array ◽  
Low Cost ◽  
Bulk Phase ◽  
Phase Shifting ◽  
Phased Array Antenna ◽  
Beam Scanning ◽  
Phased Array Antennas ◽  
Array Antennas ◽  
Radiating Element

AbstractA novel, low-cost, phased-array antenna that uniquely incorporates bulk phase shifting using voltage-tunable dielectric (VTD) material is presented. The array does not contain an individual phase shifter at each radiating element. This paper presents the antenna concept and describes how it can be used as a low-cost phased array. The VTDs that are used in this antenna are described. The measured antenna patterns of a prototype phased array demonstrating electronic beam scanning at 10 GHz are also presented.

scholarly journals Investigating EM Dipole Radiating Element for Dual Polarized Phased Array Weather Radars

10.5772/66502 ◽  
2017 ◽  
Author(s):  
Ridhwan Khalid Mirza ◽  
Yan (Rockee) Zhang ◽  
Dusan Zrnic ◽  
Richard Doviak
Keyword(s):  
Phased Array ◽  
Weather Radars ◽  
Radiating Element ◽  
Dual Polarized

Bow-Tie-Shaped Radiating Element for Single and Dual Circular Polarization

2020 ◽  
Vol 68 (2) ◽  
pp. 754-764
Author(s):  
Eduardo Garcia-Marin ◽  
Jose Luis Masa-Campos ◽  
Pablo Sanchez-Olivares ◽  
Jorge A. Ruiz-Cruz
Keyword(s):  
Circular Polarization ◽  
Radiating Element ◽  
Bow Tie
Sign in / Sign up

Export Citation Format

Share Document