Diesel consumption in a high penetration remote hybrid power system with a pumped hydro and battery storage

Author(s):  
M. R. H. Asif ◽  
M. T. Iqbal
2020 ◽  
Vol 19 (1) ◽  
pp. 41-46
Author(s):  
Anannya Mondal ◽  
Md. Rifat Hazari ◽  
Mohammad Abdul Mannan ◽  
Junji Tamura

Fixed speed wind turbine-squirrel cage induction generator (FSWT-SCIG) based wind farm (WF) is increasing significantly. However, FSWT-SCIG have no frequency control capability, which creates a significant problem on power system steady-state stability. This paper represents a new operational strategy to control frequency of the entire power system including large-scale FSWT-SCIG based WF by using battery storage system (BSS). The proposed cascaded control of BSS is designed to provide effective amount of real power during steady-state period to damp frequency fluctuations. To evaluate the validity of the proposed system, simulation studies are executed on a reformed IEEE nine-bus power system with three synchronous generators (SGs) and SCIG-based WF along with BSS. The simulation results indicate that the proposed system can be an effective solution to reduce frequency fluctuations of the hybrid power system during steady-state condition.


2018 ◽  
Vol 2018 ◽  
pp. 1-13
Author(s):  
Bojian Jiang ◽  
M. Tariq Iqbal

In some rural areas in the northwest of China, people are suffering from not only the voltage drop due to long distance transmission but also the power outages due to remoteness and poorly maintained grid. In recent few years, the price of solar energy has been reduced drastically every year in China due to the government policy on renewable energy. In the near future, isolated hybrid power systems for home use could be affordable and used by residences in these rural areas. Thus, it is necessary to design a hybrid power system based on local load and weather condition to check system feasibility and expected performance. It includes load simulation, system sizing, and dynamic system modeling and simulation. This paper firstly introduces current development of renewable energy in China and then goes through the sizing, modeling, and simulation of the system design for a typical remote home in China and finally discusses the system’s availability based on the simulation results. In this paper, the NASA website is the source for weather data, and BEopt is used to generate load data. During system modeling, the MPPT algorithm is much simpler designed than the complex incremental method. A soft starter is adopted with the diesel generator for stability. The charge controller of the battery storage provides external command to the MPPT and diesel PID controller to prevent the battery storage from overcharging. The rms value of the fundamental load voltage is used in the voltage control loop of the inverter.


2019 ◽  
Vol 139 (4) ◽  
pp. 259-268
Author(s):  
Effat Jahan ◽  
Md. Rifat Hazari ◽  
Mohammad Abdul Mannan ◽  
Atsushi Umemura ◽  
Rion Takahashi ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document