An increasing the power transmission efficiency of flat spiral coils by using ferrite materials for wireless power transfer applications

2014 ◽  
Author(s):  
Samran Santalunai ◽  
Chanchai Thongsopa ◽  
Thanaset Thosdeekoraphat
Keyword(s):  
Power Transmission ◽  
Wireless Power Transfer ◽  
Transmission Efficiency ◽  
Power Transfer ◽  
Wireless Power ◽  
Spiral Coils ◽  
Flat Spiral

scholarly journals An Improved Estimation Method of Mutual Inductance Angle for a Two-Dimensional Wireless Power Transfer System

Symmetry ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 448
Author(s):  
Sangyong Lee ◽  
Jeonho Lee ◽  
Jongkyum Kwon ◽  
Se-Kyo Chung
Keyword(s):  
Power Transmission ◽  
Estimation Method ◽  
Wireless Power Transfer ◽  
Transmission Efficiency ◽  
Mutual Inductance ◽  
Transfer System ◽  
Two Dimensional ◽  
Power Transfer ◽  
Wireless Power ◽  
Wireless Power Transfer System

The improvement of power transmission efficiency (PTE) is an important issue in the design of a wireless power transfer (WPT) system. The WPT system with multiple transmitting (Tx) or receiving (Rx) coils is a way to improve the PTE. This paper deals with the estimation of the mutual inductance angle for a two-dimensional (2D) WPT system with two Tx coils and one Rx coil. The mutual inductance angle is one of the most important parameters to determine the PTE in the 2D WPT system. The condition for the maximum PTE is investigated and the mutual inductance angle is defined for the 2D WPT system. An improved estimation method of the mutual inductance angle is proposed based on the phase-locked loop (PLL) technique using the voltages and currents of the Tx coils. The simulation and experimental results are provided to validate the effectiveness of the proposed method.

Network Analysis and Impedance Matching Methods for Wireless Power Transfer via Coupled Magnetic Resonances

2013 ◽  
Vol 437 ◽  
pp. 301-305 ◽  
Author(s):  
Yan Ting Luo ◽  
Yong Min Yang ◽  
Zhong Sheng Chen
Keyword(s):  
Network Analysis ◽  
Power Transmission ◽  
Impedance Matching ◽  
Wireless Power Transfer ◽  
Transmission Efficiency ◽  
Power Transfer ◽  
Wireless Power ◽  
Matching Method ◽  
Transmission Distance ◽  
Magnetic Resonances

Wireless power transfer (WPT) via coupled magnetic resonances has received much attention owing to its high power transmission efficiency at mid-range distance in recent years. In this paper, a novel network method is used to analyze the WPT system. A two-port network model of the system is built and the ABCD parameters of the model are innovatively used to characterize the system. Then the power transmission efficiency is analyzed at different transmission distance. To improve the power transmission efficiency, an impedance matching method is proposed based on the network analysis of the system. In the end, its feasibility is testified by a case study. The results demonstrate that the maximum power transmission efficiency can be achieved by using the impedance matching method proposed in this paper.

Optimization of Resonant Inductive Wireless Power Transfer Using Multilayer Flat Spiral Coils

2015 ◽  
Vol 52 (2) ◽  
pp. 560-568 ◽  
Author(s):  
Dustin J. Alinger ◽  
Allison K. Porter ◽  
Raymond J. Sedwick
Keyword(s):  
Wireless Power Transfer ◽  
Power Transfer ◽  
Wireless Power ◽  
Spiral Coils ◽  
Flat Spiral

scholarly journals Dual-Band RF Wireless Power Transfer System with a Shared-Aperture Dual-Band Tx Array Antenna

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3803
Author(s):  
Chan-Mi Song ◽  
Hong-Jun Lim ◽  
Son Trinh-Van ◽  
Kang-Yoon Lee ◽  
Youngoo Yang ◽  
...  
Keyword(s):  
Wireless Power Transfer ◽  
Transmission Efficiency ◽  
Array Antenna ◽  
Dual Band ◽  
Single Frequency ◽  
Power Transfer ◽  
Wireless Power ◽  
Beam Focusing ◽  
Received Power ◽  
Rf Wireless

In this paper, a dual-band RF wireless power transfer (WPT) system with a shared-aperture dual-band Tx array antenna for 2.4 and 5.8 GHz is proposed. The final configuration of the Tx array, which is made up of 2.4 GHz right-handed circular polarization (RHCP) patches and 5.8 GHz RHCP patches, is derived from the optimization of 2.4 and 5.8 GHz thinned arrays, ultimately to achieve high transmission efficiency for various WPT scenarios. The dual-band RF WPT Tx system including the Tx array antenna and a Tx module is implemented, and Rx antennas with a 2.4 GHz patch, a 5.8 GHz patch, and a dual-band (2.4 and 5.8 GHz) patch are developed. To validate the proposed dual-band RF WPT system, WPT experiments using a single band and dual bands were conducted. When transmitting RF wireless power on a single frequency (either 2.482 GHz or 5.73 GHz), the received power according to the distance between the Tx and Rx and the position of the Rx was measured. When the distance was varied from 1 m to 3.9 m and the transmitted power was 40 dBm, the received power value at 2.482 GHz and 5.73 GHz were measured and found to be 24.75–13.5 dBm (WPT efficiency = 2.985–0.224%) and 19.25–6.8 dBm (WPT efficiency = 0.841–0.050%), respectively. The measured results were in good agreement with the calculated results, and it is revealed that the transmission efficiency when wireless power is transmitted via beam-focusing increases more than that with conventional beam-forming. Furthermore, the dual-band WPT experiment proves that 2.482 GHz beam and 5.73 GHz beams can be formed individually and that their wireless power can be transmitted to a dual-band Rx or two different Rx.

Sign in / Sign up

Export Citation Format

Share Document