Comprehensive Modeling of Stress-Strain Behavior for Lead-Free Solder Joints under Board-Level Drop Impact Loading Condition

2007 ◽  
Author(s):  
F.X. Che ◽  
John H.L. Pang ◽  
W.H. Zhu ◽  
Wei Sun ◽  
Anthony Sun ◽  
...  
Keyword(s):  
Impact Loading ◽  
Loading Condition ◽  
Solder Joints ◽  
Lead Free ◽  
Lead Free Solder ◽  
Stress Strain ◽  
Strain Behavior ◽  
Free Solder ◽  
Board Level ◽  
Comprehensive Modeling

A Study on Strain Concentration Around V Notch in Lead Free Solder Material and the Low Cycle Fatigue Life

2015 ◽  
Author(s):  
Takashi Kawakami ◽  
Takahiro Kinoshita ◽  
Hirokazu Oriyama
Keyword(s):  
Fatigue Life ◽  
Solder Joints ◽  
Low Cycle Fatigue ◽  
Lead Free ◽  
Design Rule ◽  
Lead Free Solder ◽  
Cycle Fatigue ◽  
Stress Strain ◽  
Test Pieces ◽  
Free Solder

Solder joints are sometimes opened under thermal cyclic loads as low cycle fatigue phenomena. The fatigue crack is usually initiated around the edge of the interface where stress and strain very severely concentrate, having stress strain singularity. In this study, Sn-3.0Ag-0.5Cu test pieces with V shape notch were supplied to low cycle fatigue tests at 100°C. And inelastic stress strain simulations, which were based on time-dependent non-unified material model, were carried out under several cyclic load levels to obtain strain distributions around the bottom of the V notch. By results of fatigue test and inelastic simulation, the depth from the bottom of the V notch, where the strain range agrees with the prediction of the fatigue life based on smooth test pieces on Coffin-Manson rule, was investigated as the mechanical design rule for lead free solder joints.

Void Formation and Their Effect on Reliability of Lead-Free Solder Joints on MID and PCB Substrates

2017 ◽  
Vol 66 (4) ◽  
pp. 1229-1237 ◽  
Author(s):  
P. Wild ◽  
T. Grozinger ◽  
D. Lorenz ◽  
A. Zimmermann
Keyword(s):  
Solder Joints ◽  
Void Formation ◽  
Lead Free ◽  
Lead Free Solder ◽  
Free Solder

Quantitative Evaluation of Voids in Lead Free Solder Joints

2015 ◽  
Vol 772 ◽  
pp. 284-289 ◽  
Author(s):  
Sabuj Mallik ◽  
Jude Njoku ◽  
Gabriel Takyi
Keyword(s):  
Solder Bump ◽  
Solder Joints ◽  
Void Formation ◽  
Lead Free ◽  
Lead Free Solder ◽  
Solder Paste ◽  
X Ray ◽  
Size And Shape ◽  
Solder Bumps ◽  
Free Solder

Voiding in solder joints poses a serious reliability concern for electronic products. The aim of this research was to quantify the void formation in lead-free solder joints through X-ray inspections. Experiments were designed to investigate how void formation is affected by solder bump size and shape, differences in reflow time and temperature, and differences in solder paste formulation. Four different lead-free solder paste samples were used to produce solder bumps on a number of test boards, using surface mount reflow soldering process. Using an advanced X-ray inspection system void percentages were measured for three different size and shape solder bumps. Results indicate that the voiding in solder joint is strongly influenced by solder bump size and shape, with voids found to have increased when bump size decreased. A longer soaking period during reflow stage has negatively affectedsolder voids. Voiding was also accelerated with smaller solder particles in solder paste.

Sign in / Sign up

Export Citation Format

Share Document