Solder joint life prediction model based on the strain energy density criterion

2004 ◽  
Author(s):  
I. Guven ◽  
V. Kradinov ◽  
E. Madenci ◽  
J.L. Tor
Keyword(s):  
Energy Density ◽  
Solder Joint ◽  
Prediction Model ◽  
Strain Energy Density ◽  
Strain Energy ◽  
Life Prediction ◽  
Model Based ◽  
Life Prediction Model

scholarly journals Low Cycle Fatigue Life Prediction Model of 800H Alloy Based on the Total Strain Energy Density Method

Materials ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 76 ◽  
Author(s):  
Wei Zhang ◽  
Tao Jiang ◽  
Liqiang Liu
Keyword(s):  
Prediction Model ◽  
Strain Energy Density ◽  
Strain Energy ◽  
Life Prediction ◽  
Low Cycle Fatigue ◽  
Fatigue Life Prediction ◽  
Cycle Fatigue ◽  
Total Strain Energy ◽  
Total Strain Energy Density ◽  
Life Prediction Model

In this paper, a high-temperature low-cycle fatigue life prediction model, based on the total strain energy density method, was established. Considering the influence of the Masing and non-Masing behavior of materials on life prediction, a new life prediction model was obtained by modifying the existing prediction model. With an 800H alloy of the heat transfer tube of a steam generator as the research object, the high-temperature and low-cycle fatigue test was carried out at two temperatures. The results show that the predicted and experimental results are in good agreement, proving the validity of the life prediction model.

Thermal Fatigue Life Prediction Model of CCGA Tin-Lead and Lead-Free Interconnects

2006 ◽  
Author(s):  
T. E. Wong ◽  
C. Chu
Keyword(s):  
Fatigue Life ◽  
Solder Joint ◽  
Prediction Model ◽  
Thermal Fatigue ◽  
Strain Energy ◽  
Life Prediction ◽  
Solder Joints ◽  
Fatigue Life Prediction ◽  
Thermal Fatigue Life ◽  
Life Prediction Model

A thermal fatigue life prediction model of a ceramic column grid array (CCGA) solder joint assembly has been developed when the 90Pb/10Sn solder columns of the CCGA package are soldered onto the printed circuit board with either tin-lead or lead-free solder paste. This model was evolved from an empirically derived formula by correlating the solder nonelastic strain energy density increment to the fatigue life test data. To develop the solder joint fatigue life prediction model, a nonlinear finite element analysis (FEA) was conducted using the ABAQUS computer code. A thermal fatigue life prediction model was then established. The test results, obtained from various sources in which tin-lead and lead-free solder pastes on PCB were used, combined with the FEA derived nonelastic strain energy density per temperature cycle, ΔW, were used to calibrate the proposed life prediction model. In the analysis, 3-D finite element global- and sub-modeling techniques were used to determine the ΔW of the CCGA solder joints when subjected to temperature cycling. The analysis results show that: 1) solder joint would typically fail across solder column instead of along solder pad interfaces; and 2) higher nonelastic strain energy densities of solder occur at the solder columns at the package corners and these solder joints would fail first. These analysis predictions are consistent with the test observations. In the model calibration process, the 625- and 1657-pin CCGA test results, which were cycled between 20°C/90°C, 0°C/100°C, -55°C/110°C, or -55°C/125°C, were reasonably well correlated to the predicted values of ΔW. Therefore, the developed life prediction model could be used and is recommended to serve as an effective tool to determine the integrity of the CCGA solder joints during temperature cycling. In addition, the following future work is recommended: 1) selecting more study cases with various solder joint configurations, package sizes, environmental profiles, etc. to further calibrate this life prediction model; 2) using this model to conduct parametric studies to identify critical factors impacting solder joint fatigue life and then seek an optimum design; and 3) developing a simplified method instead of the FEA approach to make preliminary thermal fatigue life estimates of the CCGA solder joints.

Thermal Fatigue Prediction for Leadless Solder Joint of TFBGA

2006 ◽  
Author(s):  
Chia-Lung Chang ◽  
Tzu-Jen Lin ◽  
Chih-Hao Lai
Keyword(s):  
Energy Density ◽  
Solder Joint ◽  
Creep Strain ◽  
Thermal Fatigue ◽  
Strain Energy Density ◽  
Strain Energy ◽  
Creep Property ◽  
Inelastic Strain ◽  
Temperature Cycling ◽  
Element Analysis

Nonlinear finite element analysis was performed to predict the thermal fatigue for leadless solder joint of TFBGA Package under accelerated TCT (Temperature Cycling Test). The solder joint was subjected to the inelastic strain that was generated during TCT due to the thermal expansion mismatch between the package and PCB. The solder was modeled with elastic-plastic-creep property to simulate the inelastic deformation under TCT. The creep strain rate of solder was described by double power law. The furthest solder away from the package center induced the highest strain during TCT was considered as the critical solder ball to be most likely damaged. The effects of solder meshing on the damage parameters of inelastic strain range, accumulated creep strain and creep strain energy density were compared to assure the accuracy of the simulation. The life prediction equation based on the accumulated creep strain and creep strain energy density proposed by Syed was used to predict the thermal fatigue life in this study. The agreement between the prediction life and experimental mean life is within 25 per cent. The effect of die thickness and material properties of substrate on the life of solder was also discussed.

Sign in / Sign up

Export Citation Format

Share Document