On the correlation between Static Noise Margin and Soft Error Rate evaluated for a 40nm SRAM cell

2013 ◽  
Author(s):  
Elena I. Vatajelu ◽  
G. Tsiligiannis ◽  
L. Dilillo ◽  
A. Bosio ◽  
P. Girard ◽  
...  
Keyword(s):  
Error Rate ◽  
Soft Error ◽  
Static Noise Margin ◽  
Soft Error Rate ◽  
Noise Margin ◽  
Sram Cell ◽  
Static Noise

Design and Analysis of SRAM Cell using Negative Bit-Line Write Assist Technique and Separate Read Port for High-Speed Applications

2021 ◽  
pp. 2150270
Author(s):  
Jitendra Kumar Mishra ◽  
Lakshmi Likhitha Mankali ◽  
Kavindra Kandpal ◽  
Prasanna Kumar Misra ◽  
Manish Goswami
Keyword(s):  
Power Dissipation ◽  
High Speed ◽  
Random Access ◽  
Random Access Memory ◽  
Access Memory ◽  
Static Noise Margin ◽  
Semiconductor Memory ◽  
Noise Margin ◽  
Sram Cell ◽  
Static Noise

The present day electronic gadgets have semiconductor memory devices to store data. The static random access memory (SRAM) is a volatile memory, often preferred over dynamic random access memory (DRAM) due to higher speed and lower power dissipation. However, at scaling down of technology node, the leakage current in SRAM often increases and degrades its performance. To address this, the voltage scaling is preferred which subsequently affects the stability and delay of SRAM. This paper therefore presents a negative bit-line (NBL) write assist circuit which is used for enhancing the write ability while a separate (isolated) read buffer circuit is used for improving the read stability. In addition to this, the proposed design uses a tail (stack) transistor to decrease the overall static power dissipation and also to maintain the hold stability. The comparison of the proposed design has been done with state-of-the-art work in terms of write static noise margin (WSNM), write delay, read static noise margin (RSNM) and other parameters. It has been observed that there is an improvement of 48%, 11%, 19% and 32.4% in WSNM while reduction of 33%, 39%, 48% and 22% in write delay as compared to the conventional 6T SRAM cell, NBL, [Formula: see text] collapse and 9T UV SRAM, respectively.

scholarly journals Restoration circuits for Low power Reduce Swing of 6T and 8T SRAM Cell With Improved Read and Write Margins

2021 ◽  
Vol 7 ◽  
pp. 22-34
Author(s):  
Vinod Kumar ◽  
Ram Murti Rawat
Keyword(s):  
Low Power ◽  
Static Noise Margin ◽  
Noise Margin ◽  
Equivalent Time ◽  
Sram Cell ◽  
Section Viii ◽  
Static Noise

A paper that examines the factors thataffect the Static Noise Margin (SNM) of a StaticRandom Access memories. At an equivalent time,they specialise in optimizing Read and Writeoperation of 8T SRAM cell which is best than 6TSRAM cell Using Swing Restoration Dual NodeVoltage. The read and Write operation and improveStability analysis. This SRAM technique on thecircuit or architecture level is required to improveread and write operation. during this paperComparative Analysis of 6T and 8T SRAM Cellswith Improved Read and Write Margin is completedfor 180 nm Technology with Cadence Virtuososchematics Tool.This Paper is organized as follows: thecharacteristics of 6T SRAM cell are described arerepresented in section VIII. In section IX, proposed8T SRAM cell is described. In section X, Standard8T SRAM cell is described. Section XI includes thesimulation results which give comparison of variousparameters of 6T and 8T SRAM cells. In Section XIISimulation Results and DC analysis and sectionXIII conclusion the work.

A 32 nm Read Disturb-free 11T SRAM Cell with Improved Write Ability

2019 ◽  
Vol 29 (05) ◽  
pp. 2050067
Author(s):  
S. R. Mansore ◽  
R. S. Gamad ◽  
D. K. Mishra
Keyword(s):  
High Performance ◽  
Model Simulation ◽  
Random Access ◽  
Leakage Power ◽  
Access Memory ◽  
Static Noise Margin ◽  
Noise Margin ◽  
Sram Cell ◽  
Operation Characteristics ◽  
Static Noise

Data stability, write ability and leakage power are major concerns in submicron static random access memory (SRAM) cell design. This paper presents an 11T SRAM cell with differential write and single-ended read. Proposed cell offers improved write ability by interrupting its ground connection during write operation. Separate read buffer provides disturb-free read operation. Characteristics are obtained from HSPICE simulation using 32[Formula: see text]nm high-performance predictive technology model. Simulation results show that the proposed cell achieves 4.5[Formula: see text] and 1.06[Formula: see text] higher read static noise margin (RSNM) as compared to conventional 6T (C6T) and PNN-based 10T cells, respectively, at 0.4[Formula: see text]V. Write static noise margin (WSNM) of the proposed design is 1.65[Formula: see text], 1.71[Formula: see text] and 1.77[Formula: see text] larger as compared to those of C6T, PPN-based 10T and PNN-based 10T cells, respectively, at 0.4V. Write “1” delay of the proposed cell is 0.108[Formula: see text] and 0.81[Formula: see text] as those of PPN10T and PNN10T cells, respectively. Proposed circuit consumes 1.40[Formula: see text] lesser read power as compared to PPN10T cell at 0.4[Formula: see text]V. Leakage power of the proposed cell is 0.35[Formula: see text] of C6T cell at 0.4[Formula: see text]V. Proposed 11T cell occupies 1.65[Formula: see text] larger area as compared to that of conventional 6T.

A Read-Static-Noise-Margin-Free SRAM Cell for Low-VDD and High-Speed Applications

2006 ◽  
Vol 41 (1) ◽  
pp. 113-121 ◽  
Author(s):  
K. Takeda ◽  
Y. Hagihara ◽  
Y. Aimoto ◽  
M. Nomura ◽  
Y. Nakazawa ◽  
...  
Keyword(s):  
High Speed ◽  
Static Noise Margin ◽  
Noise Margin ◽  
Sram Cell ◽  
Static Noise
Sign in / Sign up

Export Citation Format

Share Document