Compressor performance, absolutely!

2003 ◽  
Author(s):  
M.R. Titchener
Keyword(s):  
Compressor Performance

scholarly journals Axial Compressor Mean-Line Analysis: Choking Modelling and Fully-Coupled Integration in Engine Performance Simulations

2021 ◽  
Vol 6 (1) ◽  
pp. 4
Author(s):  
Ioannis Kolias ◽  
Alexios Alexiou ◽  
Nikolaos Aretakis ◽  
Konstantinos Mathioudakis
Keyword(s):  
Axial Compressor ◽  
Engine Performance ◽  
Engine Model ◽  
Multi Stage ◽  
Transient Simulations ◽  
Full Knowledge ◽  
Compressor Performance ◽  
First Time ◽  
Performance Calculation ◽  
Fully Coupled

A mean-line compressor performance calculation method is presented that covers the entire operating range, including the choked region of the map. It can be directly integrated into overall engine performance models, as it is developed in the same simulation environment. The code materializing the model can inherit the same interfaces, fluid models, and solvers, as the engine cycle model, allowing consistent, transparent, and robust simulations. In order to deal with convergence problems when the compressor operates close to or within the choked operation region, an approach to model choking conditions at blade row and overall compressor level is proposed. The choked portion of the compressor characteristics map is thus numerically established, allowing full knowledge and handling of inter-stage flow conditions. Such choking modelling capabilities are illustrated, for the first time in the open literature, for the case of multi-stage compressors. Integration capabilities of the 1D code within an overall engine model are demonstrated through steady state and transient simulations of a contemporary turbofan layout. Advantages offered by this approach are discussed, while comparison of using alternative approaches for representing compressor performance in overall engine models is discussed.

scholarly journals Prediction and Evaluation of Waterjet Pump Performance under Nonuniform Inflow Using Parallel Compressor Theory

Water ◽  
2021 ◽  
Vol 13 (1) ◽  
pp. 99
Author(s):  
Puyu Cao ◽  
Rui Zhu
Keyword(s):  
Flow Instability ◽  
Internal Flow ◽  
Weighted Sum ◽  
Pump Performance ◽  
Inlet Velocity ◽  
Inlet Distortion ◽  
Pump Head ◽  
Compressor Performance ◽  
Waterjet Pump ◽  
External Characteristics

Parallel compressor theory (PCT) is commonly used to estimate effects of inlet distortion on compressor performance. As well as compressor, the actual inflow to pump is also nonuniform and unfavorable for performances. Nowadays, insufficient understanding of nonuniform inflow effects on pump performance restricts its development. Therefore, this paper applies PCT to predict external characteristics and evaluate internal flow instability of waterjet pump under nonuniform inflow. According to features of nonuniform inflow, the traditional PCT is modified and makes waterjet pump sub-divided into two circumferential tubes owning same performances but with different inlet velocity (representing nonuniform inflow). Above all, numerical simulation has been conducted to validated the applicability and accuracy of PCT in head prediction of waterjet pump under nonuniform inflow, since area-weighted sum of each tube head (i.e., theoretical pump head) is highly consistent with simulated result. Moreover, based on identifications of when and which tube occurs stall, PCT evaluates four stall behaviors of waterjet pump: partial deep stall, partial stall, pre-stall and full stall. Furthermore, different stall behavior generates different interactions between head variation of each tube, resulting in a multi-segment head curve under nonuniform inflow. The modified PCT with associated physical interpretations are expected to provide a sufficient understanding of nonuniform inflow effects on pump performances.

scholarly journals Influence of Seal Cavity Leakage Flow on Compressor Performance Investigated with a Circumferentially Averaged Method

2021 ◽  
Vol 11 (2) ◽  
pp. 780
Author(s):  
Dong Liang ◽  
Xingmin Gui ◽  
Donghai Jin
Keyword(s):  
Flow Field ◽  
Pressure Ratio ◽  
Interaction Mechanism ◽  
Main Flow ◽  
Leakage Flow ◽  
Destructive Effect ◽  
Through Flow ◽  
Compressor Performance ◽  
Overall Performance ◽  
Flow Blockage

In order to investigate the effect of seal cavity leakage flow on a compressor’s performance and the interaction mechanism between the leakage flow and the main flow, a one-stage compressor with a cavity under the shrouded stator was numerically simulated using an inhouse circumferentially averaged through flow program. The leakage flow from the shrouded stator cavity was calculated simultaneously with main flow in an integrated manner. The results indicate that the seal cavity leakage flow has a significant impact on the overall performance of the compressor. For a leakage of 0.2% of incoming flow, the decrease in the total pressure ratio was 2% and the reduction of efficiency was 1.9 points. Spanwise distribution of the flow field variables of the shrouded stator shows that the leakage flow leads to an increased flow blockage near the hub, resulting in drop of stator performance, as well as a certain destructive effect on the flow field of the main passage.

scholarly journals Simulation of Compressor Performance Deterioration due to Erosion

1989 ◽  
Author(s):  
W. Tabakoff ◽  
A. N. Lakshminarasimha ◽  
M. Pasin
Keyword(s):  
Fault Model ◽  
Experimental Results ◽  
Performance Tests ◽  
Individual Stage ◽  
One Stage ◽  
Before And After ◽  
Performance Deterioration ◽  
Compressor Performance ◽  
Multistage Compressor ◽  
The Individual

Experimental results obtained from cascades and one stage compressor performance tests before and after erosion were used to test a fault model to represent erosion. This model was implemented on a stage stacking program developed to demonstrate the effect of erosion in a multistage compressor. The effect of the individual stage erosion on the overall compressor performance is also demonstrated.

Compressor Performance and Operability in Swirl Distortion

2010 ◽  
Author(s):  
Yogi Sheoran ◽  
Bruce Bouldin ◽  
P. Murali Krishnan
Keyword(s):  
Gas Turbine ◽  
Complex Geometry ◽  
Full Range ◽  
Axial Compressor ◽  
Cfd Model ◽  
Generator System ◽  
Sliding Mesh ◽  
Wide Range ◽  
Compressor Performance ◽  
The Impact

Inlet swirl distortion has become a major area of concern in the gas turbine engine community. Gas turbine engines are increasingly installed with more complicated and tortuous inlet systems, like those found on embedded installations on Unmanned Aerial Vehicles (UAVs). These inlet systems can produce complex swirl patterns in addition to total pressure distortion. The effect of swirl distortion on engine or compressor performance and operability must be evaluated. The gas turbine community is developing methodologies to measure and characterize swirl distortion. There is a strong need to develop a database containing the impact of a range of swirl distortion patterns on a compressor performance and operability. A recent paper presented by the authors described a versatile swirl distortion generator system that produced a wide range of swirl distortion patterns of a prescribed strength, including bulk swirl, twin swirl and offset swirl. The design of these swirl generators greatly improved the understanding of the formation of swirl. The next step of this process is to understand the effect of swirl on compressor performance. A previously published paper by the authors used parallel compressor analysis to map out different speed lines that resulted from different types of swirl distortion. For the study described in this paper, a computational fluid dynamics (CFD) model is used to couple upstream swirl generator geometry to a single stage of an axial compressor in order to generate a family of compressor speed lines. The complex geometry of the analyzed swirl generators requires that the full 360° compressor be included in the CFD model. A full compressor can be modeled several ways in a CFD analysis, including sliding mesh and frozen rotor techniques. For a single operating condition, a study was conducted using both of these techniques to determine the best method given the large size of the CFD model and the number of data points that needed to be run to generate speed lines. This study compared the CFD results for the undistorted compressor at 100% speed to comparable test data. Results of this study indicated that the frozen rotor approach provided just as accurate results as the sliding mesh but with a greatly reduced cycle time. Once the CFD approach was calibrated, the same techniques were used to determine compressor performance and operability when a full range of swirl distortion patterns were generated by upstream swirl generators. The compressor speed line shift due to co-rotating and counter-rotating bulk swirl resulted in a predictable performance and operability shift. Of particular importance is the compressor performance and operability resulting from an exposure to a set of paired swirl distortions. The CFD generated speed lines follow similar trends to those produced by parallel compressor analysis.

Study on Characteristics of the Linear Air-Conditioner Compressor at Varied Operating Conditions

2011 ◽  
Vol 201-203 ◽  
pp. 632-636 ◽  
Author(s):  
Jie Fei Xie ◽  
Xin Hua Li ◽  
Hong Zhang
Keyword(s):  
Engineering Application ◽  
Axial Direction ◽  
Operating Conditions ◽  
Air Conditioner ◽  
Design Development ◽  
Runge Kutta Method ◽  
Moving Body ◽  
Cylinder Piston ◽  
Compressor Performance ◽  
Intake Pressure

This paper mainly introduces a novel linear air conditioner compressor which is driven by the linear oscillatory motor with two divided moving body, of which the Cylinder-piston assembly presents symmetrical distribution along the axial direction. The compressor dynamics equations were built and solved numerically with the fourth order Runge-Kutta method. in the meantime, this paper emphatically analyzes the influence of those factors, such as the intake pressure, the exhaust pressure, the suction gas superheat, the cooling degree, on the compressor performance at varied operating conditions. These works shows that improving the suction gas pressure and reducing the exhuast pressure can help to increase the refrigeration capacity and energy efficiency ratio of the air conditioner compressor. Those analysis results provide theory foundation for design,development, and engineering application of this linear air-conditioner compressor.

Numerical simulation of non-uniform roughness distribution on compressor performance

2017 ◽  
Vol 23 (2) ◽  
pp. 389-397 ◽  
Author(s):  
Haiou Sun ◽  
Meng Wang ◽  
Zhongyi Wang ◽  
Jingyuan Ma
Keyword(s):  
Numerical Simulation ◽  
Compressor Performance
Sign in / Sign up

Export Citation Format

Share Document