Minimizing Energy Consumption for Embedded Multicore Systems Using Cache Configuration and Task Mapping

Author(s):  
ZhiHua Gan ◽  
Mingquan Zhang ◽  
Zhimin Gu ◽  
Jizan Zhang
Author(s):  
Tim Wegner ◽  
Martin Gag ◽  
Dirk Timmermann

With the progress of deep submicron technology, power consumption and temperature-related issues have become dominant factors for chip design. Therefore, very large-scale integrated systems like Systems-on-Chip (SoCs) are exposed to an increasing thermal stress. On the one hand, this necessitates effective mechanisms for thermal management and task mapping. On the other hand, application of according thermal-aware approaches is accompanied by disturbance of system integrity and degradation of system performance. In this chapter, a method to predict and proactively manage the on-chip temperature distribution of systems based on Networks-on-Chip (NoCs) is proposed. Thereby, traditional reactive approaches for thermal management and task mapping can be replaced. This results in shorter response times for the application of management measures and therefore in a reduction of temperature and thermal imbalances and causes less impairment of system performance. The systematic analysis of simulations conducted for NoC sizes up to 4x4 proves that under certain conditions the proactive approach is able to mitigate the negative impact of thermal management on system performance while still improving the on-chip temperature profile. Similar effects can be observed for proactive thermal-aware task mapping at system runtime allowing for the consideration of prospective thermal conditions during the mapping process.


2017 ◽  
Vol 13 (2) ◽  
pp. 155014771668696
Author(s):  
Zhihua Gan ◽  
Zhimin Gu ◽  
Hai Tan ◽  
Mingquan Zhang ◽  
Jizan Zhang

Energy is a scarce resource in real-time embedded systems due to the fact that most of them run on batteries. Hence, the designers should ensure that the energy constraints are satisfied in addition to the deadline constraints. This necessitates the consideration of the impact of the interference due to shared, low-level hardware resources such as the cache on the worst-case energy consumption of the tasks. Toward this aim, this article proposes a fine-grained approach to analyze the bank-level interference (bank conflict and bus access interference) on real-time multicore systems, which can reasonably estimate runtime interferences in shared cache and yield tighter worst-case energy consumption. In addition, we develop a bank-to-core mapping algorithm for reducing bank-level interference and improving the worst-case energy consumption. The experimental results demonstrate that our approach can improve the tightness of worst-case energy consumption by 14.25% on average compared to upper-bound delay approach. The bank-to-core mapping provides significant benefits in worst-case energy consumption reduction with 7.23%.


2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Hongli Zhang ◽  
Panpan Li ◽  
Zhigang Zhou

The serious issue of energy consumption for high performance computing systems has attracted much attention. Performance and energy-saving have become important measures of a computing system. In the cloud computing environment, the systems usually allocate various resources (such as CPU, Memory, Storage, etc.) on multiple virtual machines (VMs) for executing tasks. Therefore, the problem of resource allocation for running VMs should have significant influence on both system performance and energy consumption. For different processor utilizations assigned to the VM, there exists the tradeoff between energy consumption and task completion time when a given task is executed by the VMs. Moreover, the hardware failure, software failure and restoration characteristics also have obvious influences on overall performance and energy. In this paper, a correlated model is built to analyze both performance and energy in the VM execution environment given the reliability restriction, and an optimization model is presented to derive the most effective solution of processor utilization for the VM. Then, the tradeoff between energy-saving and task completion time is studied and balanced when the VMs execute given tasks. Numerical examples are illustrated to build the performance-energy correlated model and evaluate the expected values of task completion time and consumed energy.


Electronics ◽  
2021 ◽  
Vol 10 (22) ◽  
pp. 2797
Author(s):  
Abdullah Lakhan ◽  
Jin Li ◽  
Tor Morten Groenli ◽  
Ali Hassan Sodhro ◽  
Nawaz Ali Zardari ◽  
...  

Currently, the use of biosensor-enabled mobile healthcare workflow applications in mobile edge-cloud-enabled systems is increasing progressively. These applications are heavyweight and divided between a thin client mobile device and a thick server edge cloud for execution. Application partitioning is a mechanism in which applications are divided based on resource and energy parameters. However, existing application-partitioning schemes widely ignore security aspects for healthcare applications. This study devises a dynamic application-partitioning workload task-scheduling-secure (DAPWTS) algorithm framework that consists of different schemes, such as min-cut algorithm, searching node, energy-enabled scheduling, failure scheduling, and security schemes. The goal is to minimize the energy consumption of nodes and divide the application between local nodes and edge nodes by applying the secure min-cut algorithm. Furthermore, the study devises the secure-min-cut algorithm, which aims to migrate data between nodes in a secure form during application partitioning in the system. After partitioning the applications, the node-search algorithm searches optimally to run applications under their deadlines. The energy and failure schemes maintain the energy consumption of the nodes and the failure of the system. Simulation results show that DAPWTS outperforms existing baseline approaches by 30% in terms of energy consumption, deadline, and failure of applications in the system.


Sign in / Sign up

Export Citation Format

Share Document