Impact of Pre-University Factors on the Motivation and Performance of Undergraduate Students in Software Engineering

2017 ◽  
Author(s):  
Pablo Schoeffel ◽  
Raul Sidnei Wazlawick ◽  
Vinicius Ramos
Keyword(s):  
Software Engineering ◽  
Undergraduate Students ◽  
And Performance

scholarly journals Cross-Mode Comparability of Computer-Based Testing (CBT) Versus Paper-Pencil Based Testing (PPT): An Investigation of Testing Administration Mode among Iranian Intermediate EFL Learners

2017 ◽  
Vol 10 (2) ◽  
pp. 23 ◽  
Author(s):  
Hooshang Khoshsima ◽  
Monirosadat Hosseini ◽  
Seyyed Morteza Hashemi Toroujeni
Keyword(s):  
Undergraduate Students ◽  
Pearson Correlation ◽  
Language Assessment ◽  
State University ◽  
Pearson Correlation Test ◽  
Computer Based ◽  
Computer Based Testing ◽  
Testing Mode ◽  
And Performance ◽  
And Gender

Advent of technology has caused growing interest in using computers to convert conventional paper and pencil-based testing (Henceforth PPT) into Computer-based testing (Henceforth CBT) in the field of education during last decades. This constant promulgation of computers to reshape the conventional tests into computerized format permeated the language assessment field in recent years. But, enjoying advantages of computers in language assessment raise the concerns of the effects that computerized mode of testing may have on CBT performance. Thus, this study investigated the score comparability of Vocabulary in Use test taken by 30 Iranian undergraduate students studying at a state university located in Chabahar region of Iran (CMU) to see whether scores from two administrations of testing mode were different. Therefore, two similar tests were administered to the male and female participants on two testing mode occasions with four weeks interval. Employing One-Way ANOVA statistical test to compare the mean scores and Pearson Correlation test to find the relationship between mode preference and performance revealed that two sets of scores were not different and gender difference was not also considered a variable that might affect performance on CBT. Based on the results, computerized version of the test can be considered a favorable alternative for the state undergraduate students in Iran.

scholarly journals The effect of English Non-Modal Operators on Proficiency and Performance of Undergraduate Students

2020 ◽  
Vol 4 (1) ◽  
pp. 271-281
Author(s):  
Khalid ◽  
Ghani Rahman ◽  
Abdul Hamid
Keyword(s):  
Data Collection ◽  
Undergraduate Students ◽  
Proficiency Test ◽  
Sampling Technique ◽  
Model Operator ◽  
Undergraduate Level ◽  
Modal Operators ◽  
Idiomatic Expressions ◽  
Convenience Sampling ◽  
And Performance

This study focuses on the problems posed by the English non-modal operators to the undergraduate level students of Hazara University, Mansehra, Pakistan. The data was collected from hundred students selected through non-random and convenience sampling technique. A proficiency test was used as a tool for data collection. The test was focused on all the uses of non-modal operators. The results show that some of these problems were caused by the intervention of some of grammatical concepts like tense, aspect, back shifting and voice. While some grammatical operations like negation, interrogation and insertion/omission had no role and so were found comparatively easy. These operators when used after wh-word such as when, while, before and if posed difficulty for the subjects. Similarly, different forms such as non-tensed form and uses such as dynamic and non-dynamic of non-modal operators were also problematic for the subjects. The highest frequency of error was found in the use of non-model operator for emphasis and surprise. However, the degree of difficulty posed by non-modal operators in idiomatic expressions was not significant.

Assessment of residential institute foodservice using Kano categorization and importance–performance analysis

2020 ◽  
Vol 32 (3) ◽  
pp. 401-428 ◽  
Author(s):  
Aayush Singha Roy ◽  
Dipankar Bose ◽  
U.K. Bera
Keyword(s):  
Performance Analysis ◽  
Undergraduate Students ◽  
High Performance ◽  
Design Methodology ◽  
Functional Type ◽  
Multiple Methods ◽  
Self Assessment ◽  
Residential Students ◽  
Content Type ◽  
And Performance

PurposeIn this article, we identify various foodservice-related attributes that are important for undergraduate students residing in hostels and avail service from specific foodservice providers. We also investigate the performance of attributes to determine areas where the foodservice providers should maintain a high performance or where improvement is required.Design/methodology/approachWe apply the Kano methodology to design the questionnaire for 24 different attributes. For each attribute, we construct three questions; namely, functional type, dysfunctional type, and performance of the hostel foodservice. We collect a total of 317 responses. We use multiple methods to determine the dominant category. Finally, combining the values of these methods, we study relative positions of the attributes in the importance–performance grid.FindingsBased on the Kano categorization, quality-related attributes are most important, followed by hygiene, comfort, availability, variety, and time, in the descending order. The gender of the respondent plays an important role in categorization of some attributes. Using the importance–performance analysis, we identify the attributes where the foodservice provider should maintain a high performance or where improvement is required. Improvements in some attributes are difficult due to foodservice provider's self-assessment of high performance or high difficulty for improvement.Originality/valueIn this study, we examine the importance of various foodservice attributes among undergraduate residential students. We combine multiple methods of Kano categorization to compute importance values of the attributes. We also investigate the reasons behind the gap between student's and foodservice manager's perception of the performance of these attributes.

But Will It Build? Assessing Student Engineering Designers’ Use of Design for Additive Manufacturing Considerations in Design Outcomes

2020 ◽  
Vol 142 (9) ◽  
Author(s):  
Rohan Prabhu ◽  
Scarlett R. Miller ◽  
Timothy W. Simpson ◽  
Nicholas A. Meisel
Keyword(s):  
Additive Manufacturing ◽  
Undergraduate Students ◽  
Contact Area ◽  
Educational Interventions ◽  
Support Material ◽  
Design Task ◽  
Process Characteristics ◽  
Build Time ◽  
And Performance ◽  
Part Complexity

Abstract Additive manufacturing (AM) enables engineers to improve the functionality and performance of their designs by adding complexity at little to no additional cost. However, AM processes also exhibit certain unique limitations, such as the presence of support material. These limitations must be accounted for to ensure that designs can be manufactured feasibly and cost-effectively. Given these unique process characteristics, it is important for an AM-trained workforce to be able to incorporate both opportunistic and restrictive design for AM (DfAM) considerations into the design process. While AM/DfAM educational interventions have been discussed in the literature, few studies have objectively assessed the integration of DfAM in student engineering designers’ design outcomes. Furthermore, limited research has explored how the use of DfAM affects the students’ AM designs’ achievement of design task objectives. This research explores this gap in literature through an experimental study with 301 undergraduate students. Specifically, participants were exposed to either restrictive DfAM or dual DfAM (both opportunistic and restrictive) and then asked to participate in a design challenge. The participants’ final designs were evaluated for (1) build time and build material (2) the use of the various DfAM concepts, and (3) the features used to manifest these DfAM concepts. The results show that the use of certain DfAM considerations, such as part complexity, number of parts, support material mass, and build plate contact area (corresponding to warping tendency), correlated with the build material and build time of the AM designs—minimizing both of which were objectives of the design task. The results also show that introducing participants to opportunistic DfAM leads to the generation of designs with higher part complexity and lower build plate contact area but a greater presence of inaccessible support material.

But Will it Print?: Assessing Student Use of Design for Additive Manufacturing and Exploring its Effect on Design Performance and Manufacturability

2019 ◽  
Author(s):  
Rohan Prabhu ◽  
Scarlett R. Miller ◽  
Timothy W. Simpson ◽  
Nicholas A. Meisel
Keyword(s):  
Additive Manufacturing ◽  
Undergraduate Students ◽  
Educational Interventions ◽  
Support Material ◽  
Design Performance ◽  
Process Characteristics ◽  
Build Time ◽  
And Performance ◽  
Am Processes ◽  
Design For Am

Abstract Additive manufacturing (AM) enables engineers to improve the functionality and performance of their designs by adding complexity at little to no additional cost. However, AM processes also exhibit certain unique limitations, such as the presence of support material, which must be accounted for to ensure that designs can be manufactured feasibly and cost-effectively. Given these unique process characteristics, it is important for an AM-trained workforce to be able to incorporate both opportunistic and restrictive design for AM (DfAM) considerations into the design process. While AM/DfAM educational interventions have been discussed in the literature, limited research has investigated the effect of these interventions on students’ use of DfAM. Furthermore, limited research has explored how DfAM use affects the performance of students’ AM designs. This research explores this gap through an experimental study with 123 undergraduate students. Specifically, participants were exposed to either restrictive DfAM or dual DfAM (both opportunistic and restrictive) and then asked to participate in an AM design challenge. The students’ final designs were evaluated for (1) performance with respect the design objectives and constraints, and (2) the use of the various aspects of DfAM. The results showed that the use of certain DfAM considerations, such as minimum feature size and support material mass, successfully predicted the performance of the AM designs. Further, while the variations in DfAM education did not influence the performance of the AM designs, it did have an effect on the students’ use of certain DfAM concepts in their final designs. These results highlight the influence of DfAM education in bringing about an increase in students’ use of DfAM. Moreover, the results demonstrate the potential influence of DfAM in reducing build time and build material of the students’ AM designs, thus improving design performance and manufacturability.

scholarly journals Gutter Design and Business Development for Domestic Rainwater Harvesting Systems: A Case Study

2014 ◽  
Vol 9 (1) ◽  
pp. 64-78
Author(s):  
Jillian Zankowski ◽  
Yixin Sun ◽  
Abdalla Nassar ◽  
Khanjan Mehta
Keyword(s):  
Service Learning ◽  
Cross Section ◽  
Undergraduate Students ◽  
Rainwater Harvesting ◽  
Rectangular Cross Section ◽  
Learning Experience ◽  
Skill Sets ◽  
Harvesting Systems ◽  
And Performance

Rainwater harvesting is a simple and effective tool to collect and store water for domestic and institutional use. In developing countries, captured rainwater can be used to replace or supplement government-supplied or manually-transported water. A rainwater harvesting system consists of a catchment area, gutter, and storage tank. Gutters typically have a V-shaped, trapezoidal or rectangular cross-section. This work presents a case study on the design and performance analysis of three conventional and one novel, “wrapped” gutter cross-section along with the implementation of a novel gutter design in the developing world. A Team of undergraduate students performed the design and analysis and, though a service-learning experience in May 2013, investigated barriers to implementing rainwater harvesting in central Kenya. It was found that while gutters can be easily fabrication and installed using locally-available materials and skill-sets, for consumer, the potential return on investment was low and the cost of implementation was high. For producers and installers, non-uniform roof designs and conditions was a major obstacle.

Making Knowledge/Playing Culture

2020 ◽  
Vol 40 (1-2) ◽  
pp. 83-101
Author(s):  
Antje Budde ◽  
Sebastian Samur
Keyword(s):  
Experiential Learning ◽  
Undergraduate Students ◽  
Performance Studies ◽  
Performing Arts ◽  
Undergraduate Research ◽  
Theoretical Background ◽  
Comparative Approach ◽  
University Of Toronto ◽  
And Performance ◽  
The University

(A project of the Digital Dramaturgy Lab at the Centre for Drama, Theatre and Performance Studies, University of Toronto) This article discusses the 2017 festival-based undergraduate course, “Theatre Criticism and Festival Dramaturgy in the Digital Age in the Context of Globalization—A Cultural-Comparative Approach” as a platform for experiential learning. The course, hosted by the University of Toronto’s Centre for Drama, Theatre and Performance Studies, and based on principles of our Digital Dramaturgy Lab, invited a small group of undergraduate students to critically investigate two festivals—the Toronto Fringe Festival and the Festival d’Avignon—in order to engage as festival observers in criticism and analysis of both individual performances and festival programming/event dramaturgy. We argue that site-specific modes of experiential learning employed in such a project can contribute in meaningful ways to, and expand, current discourses on festivalising/festivalization and eventification through undergraduate research. We focus on three modes of experiential learning: nomadic learning (learning on the move, digital mobility), embodied knowledge (learning through participation, experience, and feeling), and critical making (learning through a combination of critical thinking and physical making). The article begins with a brief practical and theoretical background to the course. It then examines historical conceptions of experiential learning in the performing arts, including theoriesadvanced by Burnet Hobgood, David Kolb and Ronald Fry, and Nancy Kindelan. The importance of the festival site is then discussed, followed by an examination of how the festivals supported thethree modes of experiential learning. Samples of student works are used to support this analysis.

Transport support trading activities

2020 ◽  
Author(s):  
Yuriy Kochinov ◽  
Tat'yana Kochinova
Keyword(s):  
Higher Education ◽  
Undergraduate Students ◽  
Federal State ◽  
Educational Standards ◽  
Practical Solution ◽  
Current State ◽  
Trading Activities ◽  
And Performance ◽  
State Educational ◽  
Independent Work

The tutorial discusses the current state of the transport system of Russia, types and marking of goods, terms of delivery of goods characteristics of modes of transport; describes the types of cargo and performance evaluation of transport; the data for the practical solution of situational tasks and test questions for independent work and test knowledge. Meets the requirements of Federal state educational standards of higher education of the last generation. For undergraduate students enrolled in field of study "trading business" and other economic areas.

Sign in / Sign up

Export Citation Format

Share Document