Circular Polarization Microstrip Antenna Array 1×2 For Microwave Radio Communication

Author(s):  
Indra Surjati ◽  
Syah Alam ◽  
Lydia Sari ◽  
Yuli Kurnia Ningsih ◽  
Elfi Syukriati ◽  
...  
2018 ◽  
Vol 232 ◽  
pp. 04080 ◽  
Author(s):  
Junyan Wu ◽  
Jiaao Yu ◽  
Qin Tao

A missile-borne conformal dual-fed circular polarized microstrip antenna array is designed and fabricated, which realized omnidirectional radiation in horizontal direction. Frequencies of the antenna include GPS L1 frequency (1.575GHz) and Beidou navigation system B1 frequency (1.562GHz). Based on the HFSS simulation, the influence of conformation is analyzed on S11, axial ratio and gain of antenna array. The size of microstrip patches is changed so that the influence of conformation on antenna can be reduced. The circular polarization performance and the circular polarization gain of the antenna are also improved. The antenna array prototype is fabricated and measured. The result shows that the S11 parameter of the antenna is less than -10dB in the 1.55~1.60GHz frequency band. At the GPS L1 frequency and the Beidou B1 frequency, the maximum of horizontal omnidirectional gain is 1.73dB, 1.25dB respectively. The out-of-roundness of the radiation pattern is less than 2.5dB. The antenna has a good horizontal omnidirectional circular polarization radiation performance.


2005 ◽  
Vol 15 (2) ◽  
pp. 1048-1051 ◽  
Author(s):  
D.-C. Chung ◽  
C.-H. Yun ◽  
K.-H. An ◽  
S.-H. Lim ◽  
S.-Y. Choi ◽  
...  

Author(s):  
Oulhaj Otman ◽  
Naima A. Touhami ◽  
Mohamed Aghoutane ◽  
Abdelmounaim Belbachir Kchairi

In this work, we present a new configuration of a new miniature microstrip antenna array having a wide frequency band and with a circular polarization. The bandwidth is about 2GHz for a reflection coefficient under -10dB and centered on the ISM ‘Industrial Scientific Medical’ band at 5.8 GHz. To design such array, we have started the design by validating one antenna element at 10 GHz and after that by using the technique of defected ground, we have validated the antenna array in the frequency band [4 GHz -6 GHz] which will permit to miniature the dimensions. The final fabricated antenna array is mounted on an FR4 substrate, the whole area is 102.48 X 31.39 mm<sup>2</sup>  with a gain of 5dBi at 4GHz.


Sign in / Sign up

Export Citation Format

Share Document