Voltage-mode multifunction biquadratic filter with single input and five outputs

2012 ◽  
Author(s):  
Hua-Pin Chen ◽  
Yu-Hsin Lin ◽  
Yu-Ling Chang
Keyword(s):  
Voltage Mode ◽  
Biquadratic Filter ◽  
Single Input

Voltage-Mode Multifunctional Biquadratic Filter Using VDDDA

2015 ◽  
Vol 781 ◽  
pp. 155-159 ◽  
Author(s):  
Suriya Soisang ◽  
Kamon Jirasereemomkul ◽  
Winai Jaikla ◽  
Kohji Higuchi
Keyword(s):  
Quality Factors ◽  
Active Device ◽  
Voltage Mode ◽  
Input Multiple Output ◽  
Low Pass ◽  
Single Structure ◽  
Biquadratic Filter ◽  
Single Input ◽  
Band Pass ◽  
Good Agreement

This paper presents a new voltage-mode single-input multiple-output multifunctional biquadratic filter using voltage differencing differential difference amplifiers (VDDDA) with high-input impedance. It consists of two VDDDA, two resistors, and two grounded capacitors. It can synthesize basic filter functions: high-past (HP), low-pass (LP) and band-pass (BP), responding through only single structure. The natural frequency can obtain by adjusting bias currents of VDDDA without disturbing quality factors. Because of using VDDDA as an active device in the circuit, the power consumption was low. The simulation using PSPICE program indicated that circuit operation has good agreement with the theory.

scholarly journals Programmable Voltage-Mode Multifunction Filter Using Two Current Conveyors and One Operational Transconductance Amplifier

1996 ◽  
Vol 19 (3) ◽  
pp. 133-138 ◽  
Author(s):  
Muhammad Taher Abuelma'atti ◽  
Azhar Quddus
Keyword(s):  
Low Temperature ◽  
Active Filter ◽  
Current Conveyors ◽  
Operational Transconductance Amplifier ◽  
Voltage Mode ◽  
Transconductance Amplifier ◽  
Biquadratic Filter ◽  
Multifunction Filter ◽  
Single Input

A new voltage-mode active-filter with single input and three outputs is presented. The parameters of the proposed filter are programmable and the filter uses grounded capacitors. The proposed circuit can simultaneously realize lowpass, highpass, and bandpass biquadratic filter functions and enjoys low temperature sensitivities.

scholarly journals Programmable Current-Conveyor-Based Voltage-Mode Filter with Single Input and Five Outputs

1995 ◽  
Vol 18 (4) ◽  
pp. 273-278 ◽  
Author(s):  
Muhammad Taher Abuelma'atti ◽  
Azhar Quddus
Keyword(s):  
Low Temperature ◽  
Active Filter ◽  
Current Conveyor ◽  
Voltage Mode ◽  
Biquadratic Filter ◽  
Single Input

A new universal voltage-mode active-filter with single input and five outputs is presented. The parameters of the proposed filter are programmable and the filter uses grounded capacitors and resistors. The proposed circuit can simultaneously realize lowpass, highpass, bandpass, allpass, and notch biquadratic filter functions and enjoys low temperature sensitivities.

scholarly journals Versatile Tunable Voltage-Mode Biquadratic Filter and Its Application in Quadrature Oscillator

Sensors ◽  
2019 ◽  
Vol 19 (10) ◽  
pp. 2349 ◽  
Author(s):  
San-Fu Wang ◽  
Hua-Pin Chen ◽  
Yitsen Ku ◽  
Yi-Chun Lin
Keyword(s):  
Input Voltage ◽  
Angular Frequency ◽  
Quadrature Oscillator ◽  
Voltage Mode ◽  
Single Output ◽  
Tuning Characteristic ◽  
Electronic Tuning ◽  
Biquadratic Filter ◽  
Single Input ◽  
Electronically Tunable

This paper presents a versatile tunable voltage-mode biquadratic filter with five inputs and three outputs. The proposed filter enjoys five single-ended output operational transconductance amplifiers (OTAs) and two grounded capacitors. The filter can be easily transformed into a quadrature oscillator. The filter with grounded capacitors is resistorless and electronically tunable. Either a voltage-mode five-input single-output biquadratic filter or a voltage-mode single-input three-output biquadratic filter can be operated by appropriate selecting input and output terminals. In the operation of five-input single-output biquadratic filter, the non-inverting lowpass, non-inverting bandpass, inverting bandpass, inverting highpass, non-inverting bandreject, inverting bandreject, and non-inverting allpass filtering responses can be realized by appropriately applying the input voltage signals. In the operation of single-input three-output biquadratic filter, the non-inverting/inverting lowpass, bandpass and bandreject filtering responses can be realized simultaneously. The circuit provides independent adjustment of the resonance angular frequency and quality factor, high-input impedance, and no inverting-type input voltage signals are imposed. The application in quadrature oscillator exhibits independent electronic tuning characteristic of the oscillation condition and the oscillation frequency. The theoretical analysis has been verified through OrCAD PSpice and furthermore by experimental measurements.

scholarly journals High-Input Impedance Voltage-Mode Multifunction Filter with Four Grounded Components and Only Two Plus-Type DDCCs

2010 ◽  
Vol 2010 ◽  
pp. 1-5 ◽  
Author(s):  
Hua-Pin Chen
Keyword(s):  
Input Impedance ◽  
Current Conveyors ◽  
High Input ◽  
High Input Impedance ◽  
Voltage Mode ◽  
Biquadratic Filter ◽  
Multifunction Filter ◽  
Component Matching ◽  
Single Input ◽  
Passive Sensitivity

This paper introduces a novel voltage-mode multifunction biquadratic filter with single input and four outputs using two plus-type differential difference current conveyors (DDCCs) and four grounded passive components. The filter can realize inverting highpass, inverting bandpass, noninverting lowpass, and noninverting bandpass filter responses, simultaneously. It still maintains the following advantages: (i) using grounded capacitors attractive for integration and absorbing shunt parasitic capacitance, (ii) using grounded resistors at allXterminals of DDCCs suitable for the variations of filter parameters and absorbing series parasitic resistances at allXterminals of DDCCs, (iii) high-input impedance good for cascadability, (iv) no need to change the filter topology, (v) no need to component-matching conditions, (vi) low active and passive sensitivity performances, and (vii) simpler configuration due to the use of plus-type DDCCs only. HSPICE and MATLAB simulations results are provided to demonstrate the theoretical analysis.

scholarly journals Voltage-Mode Universal Biquadratic Filter Using Single DVCC

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Jiun-Wei Horng ◽  
Zih-Yang Jhao
Keyword(s):  
Current Conveyor ◽  
Circuit Topology ◽  
Voltage Mode ◽  
Allpass Filters ◽  
Differential Voltage ◽  
Biquadratic Filter ◽  
Differential Voltage Current Conveyor ◽  
Output Filter

A voltage-mode universal biquadratic filter using a differential voltage current conveyor (DVCC), two capacitors, and two resistors is presented. The proposed circuit has four input terminals and three output terminals and can realize all the standard filter functions, which are lowpass, bandpass, highpass, notch, and allpass filters, without changing the circuit topology. Three simultaneous output filter responses can be obtained from some derived filter types. The proposed circuit employs only one DVCC that simplifies the configuration.

scholarly journals Voltage Mode OTRA MOS-C Single Input Multi Output Biquadratic Universal Filter

2012 ◽  
Vol 10 (5) ◽  
Author(s):  
Rajeshwari Pandey ◽  
Neeta Pandey ◽  
Sajal Kumar Paul ◽  
Ajay Singh ◽  
Balamurali Sriram ◽  
...  
Keyword(s):  
Universal Filter ◽  
Voltage Mode ◽  
Single Input
Sign in / Sign up

Export Citation Format

Share Document