Optimization of continuous casting mould oscillation parameters in steel manufacturing process using genetic algorithms

2007 ◽  
Author(s):  
Arya K. Bhattacharya ◽  
S. Debjani ◽  
Abhik Roychowdhury ◽  
Jadav Das
Keyword(s):  
Genetic Algorithms ◽  
Continuous Casting ◽  
Manufacturing Process ◽  
Steel Manufacturing ◽  
Continuous Casting Mould ◽  
Mould Oscillation

Modeling and Optimization of Mould Non-Sinusoidal Oscillation Process

2011 ◽  
Vol 291-294 ◽  
pp. 3060-3063
Author(s):  
Hong Ming Wang ◽  
Bo Feng Yang ◽  
Bang Min Song ◽  
Ting Wang Zhang ◽  
Yong Qi Yan
Keyword(s):  
Continuous Casting ◽  
Casting Speed ◽  
Oscillation Frequency ◽  
Oscillation Amplitude ◽  
Sinusoidal Oscillation ◽  
Modeling And Optimization ◽  
Oscillation Process ◽  
Continuous Casting Mould ◽  
Factor Α

A model on non-sinusoidal oscillation of continuous casting mould was established to study the pressure in flux channel. The effects of oscillation parameters on the pressure in flux channel were researched. The non-sinusoidal oscillation parameters were optimized. When the casting speed is 1.8 m·min-1, the optimized oscillation parameters are: non-sinusoidal factor (α) is 0.198, oscillation amplitude (s) is ±4mm and oscillation frequency (f) is 165min-1. When the casting speed is 2.0 m·min-1, the optimized oscillation parameters are: α is 0.186, s is ±4.5mm and f is 155min-1. These optimized oscillation parameters are proved applicable in practice.

scholarly journals Comparison of Four Models of Radiative Heat Transfer Between Flat Surface to Evaluate the Temperature Field Based on Example of the Continuous Casting Mould

2015 ◽  
Vol 60 (1) ◽  
pp. 209-213
Author(s):  
M. Rywotycki ◽  
Z. Malinowski ◽  
K. Miłkowska-Piszczek ◽  
A. Gołdasz ◽  
B. Hadała
Keyword(s):  
Heat Transfer ◽  
Continuous Casting ◽  
Radiative Heat Transfer ◽  
Radiative Heat ◽  
Casting Process ◽  
Cooling Zone ◽  
The Finite Element Method ◽  
Cast Slab ◽  
Continuous Casting Mould ◽  
Heat Transfer By Radiation

AbstractThe paper presents the results of research concerning the influence of radiative heat transfer on the strand and mould interface. The four models for determining the heat transfer boundary conditions within the primary cooling zone for the continuous casting process of steel have been presented. A cast slab - with dimensions of 1280×220 mm - has been analysed. Models describing the heat transfer by radiation have been specified and applied in the numerical calculations. The problem has been solved by applying the finite element method and the self-developed software. The simulation results, along with their analysis, have been presented. The developed models have been verified based on the data obtained from the measurements at the industrial facility.

Sign in / Sign up

Export Citation Format

Share Document