Surrounding Rock Deformation and Its Controlling Technology Gob-side Entry at Isolated Island Coal Face

2011 ◽  
Author(s):  
Zha Wen-hua ◽  
Hua Xin-zhu ◽  
Liu Shu
Keyword(s):  
Surrounding Rock ◽  
Rock Deformation ◽  
Coal Face ◽  
Surrounding Rock Deformation

scholarly journals Model Test and Numerical Study on Surrounding Rock Deformation and Overburden Strata Movement Law of Gob-Side Entry Retaining via Roof Cutting

Minerals ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 458 ◽  
Author(s):  
Daoyong Zhu ◽  
Jiong Wang ◽  
Weili Gong ◽  
Zheng Sun
Keyword(s):  
Model Test ◽  
Surrounding Rock ◽  
Rock Deformation ◽  
Shanxi Province ◽  
Beam Model ◽  
Physical Test ◽  
Strata Movement ◽  
Deformation Equation ◽  
Surrounding Rock Deformation ◽  
Overlying Strata

The effects of roof cutting techniques on the movement law of the overlying strata and deformation features of the surrounding rock in gob-side entry retaining mines were studied using 200 working faces of the Dianping coal mine in Shanxi Province. Using a mechanical analysis, a cantilever beam model formed by roof cutting was used to derive a deformation equation. The physical model test based on the field prototype revealed an asymmetrically distributed displacement curve and reduced collapse displacement when the rock stratum was far from the cutting seam. Outside of the roof cutting height, the collapse of the overlying strata gradually reached a symmetric distribution with increasing height. The deformation of the retained roadway was mainly concentrated on the roof, and the maximum deformation was 14 mm near the roof cutting side. A numerical simulation of the original size of the model test proved that the laws of strata movement and surrounding rock deformation were consistent with the physical test results. Finally, field measurements were performed, which verified the rationality of this study.

Study on the Deformation Forecasting for the Tunnel Surrounding Rock Using the Neural Network

2013 ◽  
Vol 353-356 ◽  
pp. 828-832
Author(s):  
Guo Feng Wang ◽  
Wen Zhao ◽  
Yong Ping Guan ◽  
Lei Liang
Keyword(s):  
Neural Network ◽  
Maximum Error ◽  
Mining Area ◽  
Surrounding Rock ◽  
Rock Deformation ◽  
The Neural Network ◽  
Sublevel Caving ◽  
Iron Mine ◽  
Set Up ◽  
Surrounding Rock Deformation

The non-pillar sublevel caving method is used in Iron Mine in Banshi. In the mining area, there are many folds and faults, the inclination of ore body changes greatly, and ore and rock are fragmentized. The tunnel often collapsed and the surrounding rock deformation was getting large during the construction stage. Using the data of tunnel surrounding rock deformation, we adopt the neural network method to set up the mapping relation between the tunnel surrounding rock deformation and the project factors, including tunnel deepness, tunnel dimension, measuring time and surrounding rock quality. The analyzing results show that the maximum error between the forecast and the testing data is 13%, which indicates that this method is useful and feasible to the mining engineering. Key words: rock pressure; measure, deformation of the tunnel surrounding rock; neural network; data normalization; mapping

scholarly journals STUDY ON INTENSIVE DESIGN AND CONTROL OF CHAMBER GROUP UNDER THE CONDITION OF WEAK SURROUNDING ROCK

Mining Scince ◽  
2019 ◽  
Vol 26 ◽  
Author(s):  
Jun Yang ◽  
Shilin Hou ◽  
Kaifang Zhou ◽  
Bowen Qiao ◽  
Hongyu Wang ◽  
...  
Keyword(s):  
Stability Control ◽  
Field Application ◽  
Surrounding Rock ◽  
Control Measures ◽  
Wire Mesh ◽  
Rock Deformation ◽  
Control Effect ◽  
Obvious Effect ◽  
And Control ◽  
Surrounding Rock Deformation

In order to study the design and stability control of deep soft rock chamber group, taking ninth coal mine of Hebi Coal Power Co., Ltd. as the engineering background, The main problem in normal design is analyzed with the combined method of FLAC3D numerical simulation and field engineering test. and then puts forward targeted control measures and carries out field application. The results show that, compared with the conventional design, the intensive design can reduce the stress concentration degree and plastic zone range of the surrounding rock, as well as reduce the quantities. Compared with conventional supporting schemes, the surrounding rock deformation greatly reduces by more than 82% after adopting bolting and shotcreting with wire mesh + anchor cable + floor anchor supporting. Among them, the floor heave control has obvious effect, and the decreasing amplitude reaches more than 93%. The field application shows that the surrounding rock deformation of the main chamber is within the allowable range, and the chamber control effect is good. Therefore, the research results can provide reference for the design and control of similar chamber groups.

scholarly journals Study on the influence of transient unloading on surrounding rock deformation in expanding excavation blasting

2021 ◽  
Vol 861 (4) ◽  
pp. 042083
Author(s):  
Xin Ping Li ◽  
Kai Wen Song ◽  
Ting Ting Liu ◽  
Yi Luo ◽  
Jun Hong Huang ◽  
...  
Keyword(s):  
Surrounding Rock ◽  
Rock Deformation ◽  
Surrounding Rock Deformation
Sign in / Sign up

Export Citation Format

Share Document