Effect of Recirculated Flue Gas Position on Combustion and NO Emission for High Temperature Air Combustion

2011 ◽  
Author(s):  
Yun Tang ◽  
Jinxiang Wu ◽  
Aijie Ma ◽  
Xiang Gou ◽  
Liansheng Liu ◽  
...  
Keyword(s):  
High Temperature ◽  
Flue Gas ◽  
No Emission ◽  
High Temperature Air Combustion

Numerical Study on High Temperature Air Combustion in U-Type Tube

2008 ◽  
Author(s):  
Xing Li ◽  
Li Jia ◽  
Tiantian Zhang ◽  
Lixin Yang
Keyword(s):  
High Temperature ◽  
Natural Gas ◽  
Combustion Chamber ◽  
Numerical Study ◽  
Maximum Temperature ◽  
No Emission ◽  
High Temperature Air Combustion ◽  
Average Temperature ◽  
Combustion Technology ◽  
Type Tube

In this paper, the combustion characteristics of natural gas with high-temperature air combustion technology in a U-type combustion chamber were investigated by the numerical method. The results of the CFD-based mathematical modeling of rated condition were compared with experimental data including the maximum temperature, average temperature and NO emission. The research indicates that the combustion can be well simulated using the suggested numerical model. The temperature distribution, velocity distribution in the combustion chamber and NO emission were attained. In addition, the effects of some parameters such as oxygen concentration, excessive air ratio and combustion air temperature were discussed in detail. It provided primarily theoretic basis for further study of natural gas high temperature air combustion.

Influence of Preheated Air Temperature on High Temperature Air Combustion in Furnace with Swirling Burner: a Modeling Study

2011 ◽  
Vol 354-355 ◽  
pp. 315-318
Author(s):  
Ya Xin Su ◽  
Wen Hui Wang
Keyword(s):  
High Temperature ◽  
Natural Gas ◽  
Air Temperature ◽  
Beta Function ◽  
Reynolds Stress Model ◽  
Combustion Model ◽  
Discrete Ordinates ◽  
No Emission ◽  
High Temperature Air Combustion ◽  
Gas Combustion

The high temperature air combustion performance of natural gas in an industrial furnace with a swirling burner was numerically modeled. A Beta function PDF (Probability Density Function) combustion model was selected to simulate the gas combustion combined with the Reynolds Stress Model (RSM) to simulate the turbulent flow. The radiation was simulated by a Discrete Ordinates method. The NO chemistry was simulated by thermal NO model. The simulation was performed at inlet air oxygen fraction 8% and the total air excess ratio 1.1 for natural gas. The effect of preheated air temperature on NO emission, temperature, O2 and CO distribution in the furnace was investigated. Results showed that thermal NO emission increased when the preheated air temperature increased from 1073 K to 1473K. When the preheated air temperature increased, both of the maximum and averaged temperature in the furnace increased. The oxygen was consumed by the formation of thermal NO at higher inlet air temperature and the fuel was not fully burnt out.

Analysis of low NO emission in high temperature air combustion for pulverized coal

Fuel ◽  
2004 ◽  
Vol 83 (9) ◽  
pp. 1133-1141 ◽  
Author(s):  
Rong He ◽  
Toshiyuki Suda ◽  
Makoto Takafuji ◽  
Tetsuya Hirata ◽  
Jun'ichi Sato
Keyword(s):  
High Temperature ◽  
Pulverized Coal ◽  
No Emission ◽  
High Temperature Air Combustion

URANUS 52N

Alloy Digest ◽  
1994 ◽  
Vol 43 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Flue Gas ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Flue Gas Desulfurization ◽  
Temperature Performance ◽  
Aisi Type ◽  
Better Than

Abstract URANUS 52N is a nitrogen-alloyed duplex stainless steel improved in stress-corrosion cracking resistance and with pitting and crevice corrosion resistance better than AISI Type 317L. Applications include handling phosphoric acid contaminated with chlorides and in flue gas desulfurization scrubbers. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-566. Producer or source: Creusot-Marrel.

AL 4565 ALLOY

Alloy Digest ◽  
2004 ◽  
Vol 53 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
High Resistance ◽  
Flue Gas ◽  
Heat Treating ◽  
Flue Gas Desulfurization ◽  
High Nitrogen ◽  
Temperature Performance ◽  
High Level

Abstract AL 4565 alloy has a high level of austenitizers, which provides the microstructure with a high resistance to sigma formation during welding. The high nitrogen also gives the alloy superior strength among the austenitics. Applications include flue gas desulfurization and handling seawater. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as heat treating and joining. Filing Code: SS-906. Producer or source: Allegheny Ludlum Corporation.

High temperature air combustion boiler for low BTU gas

2002 ◽  
Vol 43 (9-12) ◽  
pp. 1563-1570 ◽  
Author(s):  
Kazuhiro Kawai ◽  
Kunio Yoshikawa ◽  
Hiromichi Kobayashi ◽  
Jeng-Syan Tsai ◽  
Mamoru Matsuo ◽  
...  
Keyword(s):  
High Temperature ◽  
High Temperature Air Combustion
Sign in / Sign up

Export Citation Format

Share Document