A Hybrid Technique To Detect Botnets, Based on P2P Traffic Similarity

2019 ◽  
Author(s):  
Riaz Ullah Khan ◽  
Rajesh Kumar ◽  
Mamoun Alazab ◽  
Xiaosong Zhang
Keyword(s):  
Hybrid Technique

Acoustic microscopy techniques for the inspection of integrated circuit devices and packages

1992 ◽  
Vol 50 (2) ◽  
pp. 966-967
Author(s):  
Thomas M. Moore
Keyword(s):  
Integrated Circuit ◽  
Acoustic Microscopy ◽  
Hybrid Technique ◽  
Frequency Scanning ◽  
Ic Packaging ◽  
Ic Package ◽  
Microscopy Techniques ◽  
Ic Package Inspection ◽  
Pulse Echo ◽  
Scanning Acoustic Microscope

In the last decade, a variety of characterization techniques based on acoustic phenomena have come into widespread use. Characteristics of matter waves such as their ability to penetrate optically opaque solids and produce image contrast based on acoustic impedance differences have made these techniques attractive to semiconductor and integrated circuit (IC) packaging researchers.These techniques can be divided into two groups. The first group includes techniques primarily applied to IC package inspection which take advantage of the ability of ultrasound to penetrate deeply and nondestructively through optically opaque solids. C-mode Acoustic Microscopy (C-AM) is a recently developed hybrid technique which combines the narrow-band pulse-echo piezotransducers of conventional C-scan recording with the precision scanning and sophisticated signal analysis capabilities normally associated with the high frequency Scanning Acoustic Microscope (SAM). A single piezotransducer is scanned over the sample and both transmits acoustic pulses into the sample and receives acoustic echo signals from the sample.

Hybrid Technique of Fast RCS Computation With Characteristic Modes and AWE

2007 ◽  
Vol 6 ◽  
pp. 464-467 ◽  
Author(s):  
You-Bao Wang ◽  
Y. M. Bo ◽  
G. Q. Ji ◽  
D. Ben ◽  
G. X. Jiang ◽  
...  
Keyword(s):  
Hybrid Technique ◽  
Characteristic Modes

A modified version of MATLAB application window for predicting the weld bead profile and stress–strain plot of AA5052 CMT weldment using ER4043

SIMULATION ◽  
2021 ◽  
pp. 003754972110315
Author(s):  
B Girinath ◽  
N Siva Shanmugam
Keyword(s):  
Strain Curve ◽  
Weld Bead ◽  
Welding Parameters ◽  
Bead Geometry ◽  
Hybrid Technique ◽  
Stress Strain Curve ◽  
Stress Strain ◽  
Weld Bead Geometry ◽  
Inference System ◽  
Engineering Stress

The present study deals with the extended version of our previous research work. In this article, for predicting the entire weld bead geometry and engineering stress–strain curve of the cold metal transfer (CMT) weldment, a MATLAB based application window (second version) is developed with certain modifications. In the first version, for predicting the entire weld bead geometry, apart from weld bead characteristics, x and y coordinates (24 from each) of the extracted points are considered. Finally, in the first version, 53 output values (five for weld bead characteristics and 48 for x and y coordinates) are predicted using both multiple regression analysis (MRA) and adaptive neuro fuzzy inference system (ANFIS) technique to get an idea related to the complete weld bead geometry without performing the actual welding process. The obtained weld bead shapes using both the techniques are compared with the experimentally obtained bead shapes. Based on the results obtained from the first version and the knowledge acquired from literature, the complete shape of weld bead obtained using ANFIS is in good agreement with the experimentally obtained weld bead shape. This motivated us to adopt a hybrid technique known as ANFIS (combined artificial neural network and fuzzy features) alone in this paper for predicting the weld bead shape and engineering stress–strain curve of the welded joint. In the present study, an attempt is made to evaluate the accuracy of the prediction when the number of trials is reduced to half and increasing the number of data points from the macrograph to twice. Complete weld bead geometry and the engineering stress–strain curves were predicted against the input welding parameters (welding current and welding speed), fed by the user in the MATLAB application window. Finally, the entire weld bead geometries were predicted by both the first and the second version are compared and validated with the experimentally obtained weld bead shapes. The similar procedure was followed for predicting the engineering stress–strain curve to compare with experimental outcomes.

Improvement of transient and small signal stability in micro grid by hybrid technique with virtual synchronous generator control scheme

2021 ◽  
pp. 014233122110131
Author(s):  
Santhoshkumar Thenpennaisivem ◽  
V. Senthilkumar
Keyword(s):  
Synchronous Generator ◽  
Emperor Penguin ◽  
Hybrid Technique ◽  
Small Signal ◽  
Small Signal Stability ◽  
Change Condition ◽  
Hunting Behaviour ◽  
Micro Grid ◽  
Virtual Inertia ◽  
Virtual Synchronous Generator

In this article, a hybrid technique is proposed for improving the transient and small signal response in micro grid using virtual inertia. The proposed hybrid technique is the combined execution of both the emperor penguin optimizer (EPO) and butterfly optimization algorithm (BOA), and hence it is called EPOBOA technique. The major objective of the EPOBOA technique is to “optimize the control parameters to regulate the changes occurred in the grid parameter such as voltage and frequency based on the variations of inertia”. Here, the EPO is executed to modify the parameters of virtual synchronous generator units to achieve the objective function. The searching behaviour of the EPO is adapted by using the hunting behaviour of BOA. The proposed technique is executed in MATLAB/Simulink work site, and the experimental results are analyzed under three test cases: normal condition, irradiation change condition, and load change condition. The performance of the proposed technique is compared with different existing techniques and the calculated frequency deviation index of the proposed technique in all the cases is 0.0051, 0.0045, and 0.0047 and found to be very optimal compared with existing methods. Overall, the experimental outcomes show that the proposed EPOBOA method is more efficient and confirm its ability to solve the issues.

Transumbilical flexible endoscopic cholecystectomy in humans: first feasibility study using a hybrid technique

Endoscopy ◽  
2008 ◽  
Vol 40 (05) ◽  
pp. 428-431 ◽  
Author(s):  
C. Palanivelu ◽  
P. Rajan ◽  
M. Rangarajan ◽  
R. Parthasarathi ◽  
P. Senthilnathan ◽  
...  
Keyword(s):  
Feasibility Study ◽  
Hybrid Technique ◽  
Endoscopic Cholecystectomy

Hybrid Repair of a Common Carotid Pseudoaneurysm and Concomitant Internal Carotid Stenosis With Retrograde Stenting and Carotid Endarterectomy

2021 ◽  
pp. 153857442199293
Author(s):  
Constantinos Zarmakoupis ◽  
George Galyfos ◽  
Grigorios Tsoukalos ◽  
Panagiota Dalla ◽  
Alexandra Triantafyllou ◽  
...  
Keyword(s):  
Carotid Artery ◽  
Internal Carotid Artery ◽  
Carotid Endarterectomy ◽  
Common Carotid Artery ◽  
Rare Case ◽  
Internal Carotid ◽  
Covered Stent ◽  
Hybrid Technique ◽  
Hybrid Repair ◽  
Ica Stenosis

This report aims to present a rare case of a common carotid artery (CCA) pseudoaneurysm with a concomitant internal carotid artery (ICA) stenosis that were treated with a hybrid technique. This strategy included the retrograde placement of a CCA covered stent under ICA clamping followed by standardized carotid endarterectomy. The technique will be discussed and compared with other possible treatments.

Sign in / Sign up

Export Citation Format

Share Document