A study on face milling force model based on complex surface geometry

2009 ◽  
Author(s):  
Donghong Tang ◽  
Guozhi Zhang
Keyword(s):  
Complex Surface ◽  
Face Milling ◽  
Force Model ◽  
Surface Geometry ◽  
Milling Force ◽  
Model Based ◽  
Milling Force Model

Multi-Toothed Milling Force Model and Simulation for Form Milling the Gear of the Hypoid Gears

2011 ◽  
Vol 328-330 ◽  
pp. 90-95 ◽  
Author(s):  
Xin Jie Jia ◽  
Xiao Zhong Deng ◽  
Xiao Zhong Ren
Keyword(s):  
Face Milling ◽  
Force Model ◽  
Geometrical Theory ◽  
Hypoid Gear ◽  
Milling Force ◽  
Hypoid Gears ◽  
Model And Simulation ◽  
Simulation Results ◽  
Milling Forces ◽  
Milling Force Model

Prediction of the forces in milling hypoid gear was often needed in order to establish automation and optimization of the tooth-milling processes. Based on the geometrical theory of the format face-milling, the multi-toothed milling forces theoretical model for form milling the gear of the hypoid gears is presented, the milling force factors were calibrated via single factor experiments and the simulation programs were prepared. Experiments were carried out to verify the availability of the multi-toothed dynamic milling force model, the experimental results is consistent with the simulation results.

Cutting Process Dynamics Simulation for Machine Tool Structure Design

1986 ◽  
Vol 108 (2) ◽  
pp. 68-74 ◽  
Author(s):  
S. J. Lee ◽  
S. G. Kapoor
Keyword(s):  
Finite Element ◽  
Machine Tool ◽  
Structural Model ◽  
Face Milling ◽  
Cutting Process ◽  
Force Model ◽  
Milling Force ◽  
Process Dynamics ◽  
Machine Tool Structure ◽  
Milling Force Model

A methodology to simulate the real cutting process dynamics using a finite element structural model and a mechanistic face milling force model is proposed. While the finite element structural model provides an analytic way to assess structural dynamic characteristics, the mechanistic face milling force model calculates the time histories of cutting forces taking many cutting process parameters into consideration and acts as forcing functions to the structural model. The methodology is verified through experimentation. The effects of structural parameters and cutting process parameters on the dynamic behavior of the machine tool structure are also studied. The results indicate that the proposed methodology can greatly enhance the machine tool design process.

A Cutting Force Model for Face Milling Operation

2013 ◽  
Vol 765-767 ◽  
pp. 378-381 ◽  
Author(s):  
Dong Hong Tang ◽  
Fang Lu
Keyword(s):  
Design Theory ◽  
Orthogonal Design ◽  
Face Milling ◽  
Partial Least Square ◽  
Least Square ◽  
Partial Least Square Regression ◽  
Force Model ◽  
Dynamic Force ◽  
Milling Force ◽  
Milling Force Model

Based on the geometry of the cutter, the dynamic force model of face milling was established. Meanwhile, the fast and effective identification method of milling force model coefficients was provided, which combining the virtues of both orthogonal design theory and partial least-square regression (PLSR) method. Milling experiments have been conducted to verify the proposed face milling force model. Good agreements between the experimental and simulated results were presented.

Milling force model for asymmetric end-mills during high-feed milling on AISI-P20

2021 ◽  
pp. 1-8
Author(s):  
Diego Russo ◽  
Gorka Urbicain ◽  
Antonio J. Sánchez Egea ◽  
Alejandro Simoncelli ◽  
Daniel Martinez Krahmer
Keyword(s):  
Force Model ◽  
Milling Force ◽  
Aisi P20 ◽  
High Feed ◽  
End Mills ◽  
Milling Force Model

scholarly journals Prediction of Nonlinear Micro-Milling Force with a Novel Minimum Uncut Chip Thickness Model

Micromachines ◽  
2021 ◽  
Vol 12 (12) ◽  
pp. 1495
Author(s):  
Tongshun Liu ◽  
Kedong Zhang ◽  
Gang Wang ◽  
Chengdong Wang
Keyword(s):  
Cutting Force ◽  
Chip Thickness ◽  
Micro Milling ◽  
Force Model ◽  
Force Coefficient ◽  
Uncut Chip Thickness ◽  
Milling Force ◽  
Minimum Uncut Chip Thickness ◽  
Cutting Force Coefficient ◽  
Milling Force Model

The minimum uncut chip thickness (MUCT), dividing the cutting zone into the shear region and the ploughing region, has a strong nonlinear effect on the cutting force of micro-milling. Determining the MUCT value is fundamental in order to predict the micro-milling force. In this study, based on the assumption that the normal shear force and the normal ploughing force are equivalent at the MUCT point, a novel analytical MUCT model considering the comprehensive effect of shear stress, friction angle, ploughing coefficient and cutting-edge radius is constructed to determine the MUCT. Nonlinear piecewise cutting force coefficient functions with the novel MUCT as the break point are constructed to represent the distribution of the shear/ploughing force under the effect of the minimum uncut chip thickness. By integrating the cutting force coefficient function, the nonlinear micro-milling force is predicted. Theoretical analysis shows that the nonlinear cutting force coefficient function embedded with the novel MUCT is absolutely integrable, making the micro-milling force model more stable and accurate than the conventional models. Moreover, by considering different factors in the MUCT model, the proposed micro-milling force model is more flexible than the traditional models. Micro-milling experiments under different cutting conditions have verified the efficiency and improvement of the proposed micro-milling force model.

Identification of Polynomial Cutting Coefficients for a Dual-Mechanism Ball-end Milling Force Model

2019 ◽  
Vol 13 (3) ◽  
pp. 232-240
Author(s):  
Zhixin Feng ◽  
Meng Liu ◽  
Guohe Li
Keyword(s):  
Cutting Force ◽  
End Milling ◽  
Least Square ◽  
Force Model ◽  
Cutting Force Coefficients ◽  
Milling Force ◽  
Ball End Milling ◽  
Force Coefficients ◽  
Cutting Coefficients ◽  
Milling Force Model

Background: Calibration of cutting coefficients is the key content in modeling a mechanistic cutting force model. Generally, in modeling cutting force for ball end milling, the tangent, radial and binormal cutting force coefficients are each considered as a polynomial, respectively. This fact is due to the dependency between the cutting force coefficients and the cutting edge inclination angle which is variable in ball-end mills. Objective: This paper presents an approach to determine the polynomial cutting force coefficients. Methods: In this approach, the cutting force coefficients are expressed as explicit linear equations about the average slotting forces. After analysis of the least square regression method which is utilized in the cutting coefficients evaluation, the principle of cutting parameters choice in calibration experiment and the relationship between the order of polynomial and the number of experiments are presented. Besides, a lot of patents on identification of polynomial cutting coefficients for milling force model were studied. Results: Finally, a series of semi-slotting verification cutting tests were arranged, the measured force agrees well with the predicted force, which demonstrates the effectiveness of this approach. Conclusion: Based on the calibration method proposed in this paper, the cutting coefficients can be determined through (m+2) slotting experiments for m-degree shearing coefficients polynomial theoretically.

Transient Dynamic Analysis of the Matching of Lengthened Shrink-Fit Holder and Cutter in High-Speed Milling

2010 ◽  
Vol 97-101 ◽  
pp. 1819-1822 ◽  
Author(s):  
Hou Ming Zhou ◽  
Jian Xin Deng ◽  
Zhen Yu Zhao ◽  
Shi Ping Yang
Keyword(s):  
High Speed ◽  
Cutting Tool ◽  
Back Propagation ◽  
Force Model ◽  
Milling Force ◽  
Transient Dynamic Analysis ◽  
High Speed Milling ◽  
Transient Dynamic ◽  
Shrink Fit ◽  
Milling Force Model

Finite element model of the matching of lengthened shrink-fit holder (LSFH) and cutting tool is established and a milling force model is developed to predict the transient milling force exactly using back propagation neural network (BPNN). Subsequently, the transient dynamic characteristic of matching of LSFH and cutting tool is analyzed and the simulation result is obtained. Finally, the simulation result is verified with practical measurement and the results fit very well. The studies are important to optimum design and select the lengthened shrink-fit holder in high speed milling.

Sign in / Sign up

Export Citation Format

Share Document