Customized Algorithms for High Performance Memory Test in Advanced Technology Node

2009 ◽  
Author(s):  
Shomo Chen ◽  
Ning Huang ◽  
Ting-Pu Tai ◽  
Actel Niu
Keyword(s):  
High Performance ◽  
Memory Test ◽  
Advanced Technology ◽  
Technology Node

Root Cause Analysis for Pin Leakage

2016 ◽  
Author(s):  
Zhigang Song ◽  
Jochonia Nxumalo ◽  
Manuel Villalobos ◽  
Sweta Pendyala
Keyword(s):  
Failure Analysis ◽  
Root Cause Analysis ◽  
Advanced Technology ◽  
Process Step ◽  
Cause Analysis ◽  
Hard Mask ◽  
Technology Node ◽  
Root Cause ◽  
Tools And Techniques

Abstract Pin leakage continues to be on the list of top yield detractors for microelectronics devices. It is simply manifested as elevated current with one pin or several pins during pin continuity test. Although many techniques are capable to globally localize the fault of pin leakage, root cause analysis and identification for it are still very challenging with today’s advanced failure analysis tools and techniques. It is because pin leakage can be caused by any type of defect, at any layer in the device and at any process step. This paper presents a case study to demonstrate how to combine multiple techniques to accurately identify the root cause of a pin leakage issue for a device manufactured using advanced technology node. The root cause was identified as under-etch issue during P+ implantation hard mask opening for ESD protection diode, causing P+ implantation missing, which was responsible for the nearly ohmic type pin leakage.

Advanced Technology Programs for Small Turboshaft Engines: Past, Present, Future

1991 ◽  
Vol 113 (1) ◽  
pp. 33-39 ◽  
Author(s):  
E. T. Johnson ◽  
H. Lindsay
Keyword(s):  
United States Army ◽  
High Performance ◽  
The United States ◽  
Modern Technology ◽  
Advanced Technology ◽  
Gas Generator ◽  
Turbine Engine ◽  
Technology Programs ◽  
Aircraft Propulsion System ◽  
Year 2000

This paper addresses approximately 15 years of advanced technology programs sponsored by the United States Army Aviation Applied Technology Directorate and its predecessor organizations and conducted by GE Aircraft Engines (GEAE). Included in these programs is the accomplishment of (1) the 1500 shp demonstrator (GE12), which led to the 1700, and (2) the 5000 shp Modern Technology Demonstrator Engine (MTDE/GE27). Also included are several advanced technology component programs that have been completed or are ongoing through the early 1990s. The goals for the next generation of tri-service small advanced gas generator demonstration programs are shown. A prediction is thus made of the advancements required to fulfill the aircraft propulsion system established by the DoD/NASA Integrated High-Performance Turbine Engine Technology (IHPTET) initiative through the year 2000.

scholarly journals Review: Sensors for Biosignal/Health Monitoring in Electronic Skin

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2478
Author(s):  
Hyeon Seok Oh ◽  
Chung Hyeon Lee ◽  
Na Kyoung Kim ◽  
Taechang An ◽  
Geon Hwee Kim
Keyword(s):  
High Performance ◽  
Active Component ◽  
Tactile Sensor ◽  
Wearable Devices ◽  
Advanced Technology ◽  
Electronic Skin ◽  
Points Of View ◽  
External Stimuli ◽  
Flexible Component

Skin is the largest sensory organ and receives information from external stimuli. Human body signals have been monitored using wearable devices, which are gradually being replaced by electronic skin (E-skin). We assessed the basic technologies from two points of view: sensing mechanism and material. Firstly, E-skins were fabricated using a tactile sensor. Secondly, E-skin sensors were composed of an active component performing actual functions and a flexible component that served as a substrate. Based on the above fabrication processes, the technologies that need more development were introduced. All of these techniques, which achieve high performance in different ways, are covered briefly in this paper. We expect that patients’ quality of life can be improved by the application of E-skin devices, which represent an applied advanced technology for real-time bio- and health signal monitoring. The advanced E-skins are convenient and suitable to be applied in the fields of medicine, military and environmental monitoring.

Pavement Technology Elements in Green Highway

2015 ◽  
Vol 73 (4) ◽  
Author(s):  
W. N. Aifa ◽  
M.R. Hainin ◽  
M.Z. Abd.Majid ◽  
R. MohamadZin ◽  
H. Yaacob ◽  
...  
Keyword(s):  
High Performance ◽  
Advanced Technology ◽  
Control Element ◽  
Highway Design ◽  
Priority Level ◽  
Highway Engineering ◽  
Critical Elements ◽  
Weighted Analysis ◽  
Green Practices ◽  
Weighted Factor

A technology that has been experienced during the construction of a pavement has indicated the improvement in exploring the advanced technology pavement. Types of technologies of pavements applied are always related to the high performance of the pavements during the life span. Indeed, the application of technology in pavement has insisted to reduce the rate of environmental problems such as global warming, abundance of solid waste and so on. The development of technologies in pavement has been identified by the expert in highway engineering as one of the initiatives in response the sustainability requirement that later on will be applied to implement green highway concepts. Nowadays, the process of selecting a variety of green pavement technology element is becoming more challenging to be evaluated qualitatively. This paper aims to determine critical pavement technology element based on ranking of priority to achieve the objective of the green highway design. It is necessary to determine the critical elements in order to identify which elements will most contribute to the green practices based on the priority level of the weighted factor value. Therefore, a questionnaire survey was developed and distributed to the respondent in order to obtain the agreement level for the element. Based on the weighted analysis, it has been shown that the soil erosion control element has achieved first ranking in order to implement green highway and followed by permeable and cool pavement.In conclusion, the identification of critical elementsof green pavement technology is the main key towards sustainable development in the future.

Characterization and Modeling of Flicker Noise in FinFETs at Advanced Technology Node

2019 ◽  
Vol 40 (6) ◽  
pp. 985-988 ◽  
Author(s):  
Pragya Kushwaha ◽  
Harshit Agarwal ◽  
Yen-Kai Lin ◽  
Avirup Dasgupta ◽  
Ming-Yen Kao ◽  
...  
Keyword(s):  
Flicker Noise ◽  
Advanced Technology ◽  
Technology Node

A Realistic Method for Time-Dependent Dielectric Breakdown Reliability Analysis for Advanced Technology Node

2016 ◽  
Vol 63 (2) ◽  
pp. 755-759 ◽  
Author(s):  
Kong Boon Yeap ◽  
Fen Chen ◽  
Huade Walter Yao ◽  
Tian Shen ◽  
Sing Fui Yap ◽  
...  
Keyword(s):  
Reliability Analysis ◽  
Dielectric Breakdown ◽  
Advanced Technology ◽  
Time Dependent ◽  
Technology Node ◽  
Time Dependent Dielectric Breakdown

scholarly journals Advanced Aeroderivative Gas Turbines in Coal-Based High Performance Power Systems (HIPPS)

1998 ◽  
Author(s):  
F. L. Robson ◽  
D. J. Seery
Keyword(s):  
Power Systems ◽  
Gas Turbine ◽  
Gas Turbines ◽  
High Performance ◽  
Power Plants ◽  
Performance Standards ◽  
Combined Cycle ◽  
Advanced Technology ◽  
Early 21St Century ◽  
Near Term

The Department of Energy’s Federal Energy Technology Center (FETC) is sponsoring the Combustion 2000 Program aimed at introducing clean and more efficient advanced technology coal-based power systems in the early 21st century. As part of this program, the United Technologies Research Center has assembled a seven member team to identify and develop the technology for a High Performance Power Systems (HIPPS) that will provide in the near term, 47% efficiency (HHV), and meet emission goals only one-tenth of current New Source Performance Standards for coal-fired power plants. In addition, the team is identifying advanced technologies that could result in HIPPS with efficiencies approaching 55% (HHV). The HIPPS is a combined cycle that uses a coal-fired High Temperature Advanced Furnace (HITAF) to preheat compressor discharge air in both convective and radiant heaters. The heated air is then sent to the gas turbine where additional fuel, either natural gas or distillate, is burned to raise the temperature to the levels of modern gas turbines. Steam is raised in the HITAF and in a Heat Recovery Steam Generator for the steam bottoming cycle. With state-of-the-art frame type gas turbines, the efficiency goal of 47% is met in a system with more than two-thirds of the heat input furnished by coal. By using advanced aeroderivative engine technology, HIPPS in combined-cycle and Humid Air Turbine (HAT) cycle configurations could result in efficiencies of over 50% and could approach 55%. The following paper contains descriptions of the HIPPS concept including the HITAF and heat exchangers, and of the various gas turbine configurations. Projections of HIPPS performance, emissions including significant reduction in greenhouse gases are given. Application of HIPPS to repowering is discussed.

SYNTHESIS OF IODINE-CONTAINING NANO-DISPERSED COMPOSITES

2016 ◽  
Vol 1 (4) ◽  
pp. 79-82
Author(s):  
Григорьев ◽  
Vasiliy Grigorev ◽  
Козлов ◽  
Valeriy Kozlov ◽  
Мамцев ◽  
...  
Keyword(s):  
High Performance ◽  
Glycyrrhizic Acid ◽  
Organic Matrix ◽  
Advanced Technology ◽  
Human Organism ◽  
Organic Mineral ◽  
Inorganic Iodine ◽  
Physical And Chemical ◽  
Iodobenzoic Acid

The purpose of research is to develop techniques for chemical implementation of the obtained low molecular weight products with covalently bound iodine in the biodegradable matrix (glycyrrhizic acid) with obtaining nanosized composites, capable of metered cleavage of iodine in vivo. One of the vital trace elements is iodine. Adding iodine to food components is an advanced technology and it promotes replenishment of iodine deficiency in human organism. The most interesting compounds wherethe inorganic iodine are chemically bound to the organic matrix. The processes of formation of the complex "o-iodobenzoic acid-β-glycyrrhizic acid" and encapsulation mechanisms of 5-iodo-6-metiluratsila in nanoscale biodegradable matrix -β-glycyrrhizic acid by using physical and chemical methods of analysis – IR, UV and NMR spectroscopy. The evaluationof nano-sized ofsynthesized iodinebioorganic complexes by laser nanostructured analysis is carried out. The processes of deiodination o-iodobenzoic acid in vivo by high-performance liquid chromatography is examed. The conducted research showsthe bioavailability of synthesized nanostructured iodine organic-mineral complex.

Sign in / Sign up

Export Citation Format

Share Document