Transverse resonance analysis of a planar leaky wave antenna with flexible control of the complex propagation constant

Author(s):  
A. J. Martinez-Ros ◽  
J. L. Gomez-Tornero ◽  
F. Quesada-Pereira ◽  
Alejandro Alvarez-Melcon
2012 ◽  
Vol 60 (3) ◽  
pp. 1625-1630 ◽  
Author(s):  
Alejandro Javier Martinez-Ros ◽  
José Luis Gomez-Tornero ◽  
George Goussetis

Author(s):  
T V Rama Krishna ◽  
B T P Madhav ◽  
G Monica ◽  
V Janakiram ◽  
S Md Abid Basha

In this work a complex structured shorted vias microstrip leaky wave antenna is designed and analysed. A Leaky wave antenna is a travelling wave structure with complex propagation constant. When shorting vias are loaded in a periodic structure the fundamental resonant mode shows some stop band characteristics and some of the modes will strongly attenuated. Three different types of iterations are examined in this work with and without defected ground structures. The defected ground structure based leaky wave antennas are showing better performance characteristics with respect to efficiency and phase. A micro strip line feeding with impedance of 50 ohms at both ports are providing excellent impedance matching to the conducting path on the microstrip surface. The shorting vias are suppressing certain higher order frequency bands and providing excellent wide band characteristics with low loss.


Author(s):  
T V Rama Krishna ◽  
B T P Madhav ◽  
G Monica ◽  
V Janakiram ◽  
S Md Abid Basha

In this work a complex structured shorted vias microstrip leaky wave antenna is designed and analysed. A Leaky wave antenna is a travelling wave structure with complex propagation constant. When shorting vias are loaded in a periodic structure the fundamental resonant mode shows some stop band characteristics and some of the modes will strongly attenuated. Three different types of iterations are examined in this work with and without defected ground structures. The defected ground structure based leaky wave antennas are showing better performance characteristics with respect to efficiency and phase. A micro strip line feeding with impedance of 50 ohms at both ports are providing excellent impedance matching to the conducting path on the microstrip surface. The shorting vias are suppressing certain higher order frequency bands and providing excellent wide band characteristics with low loss.


2019 ◽  
Vol 2019 ◽  
pp. 1-7
Author(s):  
Bin Xi ◽  
Yuanxin Li ◽  
Yunliang Long

A miniaturized periodic microstrip leaky wave antenna (MLWA) with shorting pins is proposed in this paper. The suggested antenna consists of a number of stubs that are periodically placed on the side of the transmission line, with the outside edges of the stubs being all integrated with shorting pins. In comparison with the whole-width stubs MLWA, the proposed antenna has an advantage of effective reduction in antenna size for the similar beam-scanning capability. A series of simple and effective equations were obtained to calculate the propagation constant and determine the operating band of the antenna. The consistency of the calculated and measured propagation constant confirms the validity of the parameter equations. As demonstrated by experimental results, the main beam scans electronically and continuously from 145° to 61° in the y-z plane as the operating frequency changes from 5.7 GHz to 11.7 GHz.


2020 ◽  
Vol 10 (3) ◽  
pp. 962
Author(s):  
Hao Yu ◽  
Kuang Zhang ◽  
Xumin Ding ◽  
Qun Wu

In this paper, a novel dual-beam leaky-wave antenna (LWA) based on squarely modulated reactance surface (SquMRS) is proposed. The equivalent transmission lines model is utilized to characterize the field distributions of surface wave guided by the SquMRS. The calculated dispersion characteristics of SquMRS are verified by the simulated results, and it is demonstrated that SquMRS exhibits a more flexible control of phase constant and attenuation constant compared with traditional sinusoidally modulated reactance surface (SinMRS), which means SquMRS has a great potential for near-field focusing and far-field beam shaping. On this basis, a versatile method, based on a superposition of individual modulation patterns, was used to generated two beams with almost identical gain at 8.5 GHz. The measured results show that the gains are 10 dBi and 8.2 dBi at θ1 = −30° and θ2 = 18°, respectively, and the radiation efficiency is 83%, which shows good agreement with the simulated results.


Sign in / Sign up

Export Citation Format

Share Document