Parallel-plate slot antenna with a planar left-handed lens for TEM plane wave excitation at 7.5 GHz

2009 ◽  
Author(s):  
A. Garcia Aguilar ◽  
J.M. Fernandez ◽  
M. Sierra Castaner
Keyword(s):  
Plane Wave ◽  
Parallel Plate ◽  
Slot Antenna ◽  
Wave Excitation ◽  
Left Handed

scholarly journals Radiation Efficient Unidirectional Low-Profile Slot Antenna Elements for X-Band Application

2005 ◽  
Vol 3 ◽  
pp. 143-146
Author(s):  
C. Löcker ◽  
T. Vaupel ◽  
T. F. Eibert
Keyword(s):  
Parallel Plate ◽  
Radiation Efficiency ◽  
Slot Antenna ◽  
Coupling Coefficients ◽  
Rectangular Slot ◽  
Mode Suppression ◽  
Low Profile ◽  
Shorting Pin ◽  
Strong Excitation ◽  
Back Reflector

Abstract. Slots in metallic ground planes are very promising candidates for conformal antenna applications. However, a low-profile unidirectional antenna requires a back reflector close to the slot and the resulting stripline feed causes strong excitation of parallel-plate modes. In this contribution, we consider unidirectional reflector-backed slot configurations with parallel-plate mode suppression by shorting pins. Starting from a parametric study with respect to shorting pin location and back reflector distance, we present a stripline-fed rectangular slot element with radiation efficiency of more than 80% and a bandwidth of about 5% at centre frequency 10GHz. A careful optimisation of shorting pin locations guarantees reliable parallel-plate mode suppression without deteriorating the slot radiation behaviour. Coupling coefficients between parallel and aligned rectangular slot elements are presented. For increased bandwidth applications, a bow-tie slot element with about 8% bandwidth and radiation efficiency of close to 80% is proposed.

Tapered slot antenna array with parallel plate waveguides

2003 ◽  
Author(s):  
S. Yamaguchi ◽  
K. Yamashita ◽  
K. Nishizawa ◽  
H. Fushimi ◽  
H. Miyashita ◽  
...  
Keyword(s):  
Antenna Array ◽  
Parallel Plate ◽  
Slot Antenna

A CPW-fed uniplanar dual-band tri-polarization diversity antenna based on PIN diode for the wireless communication

2017 ◽  
Vol 9 (8) ◽  
pp. 1695-1703
Author(s):  
Haixiong Li ◽  
Yunlong Gong ◽  
Jiakai Zhang ◽  
Jun Ding ◽  
Chenjiang Guo
Keyword(s):  
Wireless Communication ◽  
Circular Polarization ◽  
Coplanar Waveguide ◽  
Axial Ratio ◽  
Dual Band ◽  
Slot Antenna ◽  
Reconfigurable Antenna ◽  
Pin Diode ◽  
Left Handed ◽  
The Right

In this paper, a coplanar waveguide (CPW)-fed dual-band uniplanar tri-polarization reconfigurable antenna based on the PIN diode switch is proposed. The proposed antenna can be reconfigured between the linear polarization (LP) and the circular polarization (CP) mode, including both the right-handed circular polarization and left-handed circular polarization simultaneously within the dual operating bands. The central frequencies of the bands are 2.63 and 4.42 GHz, respectively, and the overlapped operating bandwidth is 17.8 and 3.40%. The proposed reconfigurable antenna is a closed-slot antenna fed by the CPW transmission line and the reconfigurable mechanism is to regulate the T-shaped driven stub through switching the PIN diodes on and off. The scattering parameters, axial ratio, radiation pattern, gain, and the radiation efficiency of the proposed antenna are all investigated in the following. The optimized antenna has been fabricated to experimental test, the simulated and the measured results agree well with each other. The lower frequency band of the proposed antenna covers the 2.40 GHz WLAN specification and the upper band can be used for the 5 G communication (4.40–4.50 GHz); therefore it is suitable to be applied in the mobile wireless communication.

Sign in / Sign up

Export Citation Format

Share Document