Reconfigurable spiral antenna array for pattern diversity in wideband MIMO communication systems

2008 ◽  
Author(s):  
P. Mookiah ◽  
D. Piazza ◽  
K.R. Dandekar
Keyword(s):  
Antenna Array ◽  
Communication Systems ◽  
Spiral Antenna ◽  
Mimo Communication ◽  
Pattern Diversity

scholarly journals Full snapshot reconstruction in hybrid architecture antenna arrays

2020 ◽  
Vol 2020 (1) ◽  
Author(s):  
Maria Trigka ◽  
Christos Mavrokefalidis ◽  
Kostas Berberidis
Keyword(s):  
Antenna Array ◽  
Antenna Arrays ◽  
Communication Systems ◽  
Linear Array ◽  
Research Work ◽  
Hybrid Architecture ◽  
Angle Of Arrival ◽  
Music Algorithm ◽  
Array Structures ◽  
Signal Sources

AbstractIn the context of this research work, we study the so-called problem of full snapshot reconstruction in hybrid antenna array structures that are utilized in mmWave communication systems. It enables the recovery of the snapshots that would have been obtained if a conventional (non-hybrid) uniform linear antenna array was employed. The problem is considered at the receiver side where the hybrid architecture exploits in a novel way the antenna elements of a uniform linear array. To this end, the recommended scheme is properly designed so as to be applicable to overlapping and non-overlapping architectures. Moreover, the full snapshot recoverability is addressed for two cases, namely for time-varying and constant signal sources. Simulation results are also presented to illustrate the consistency between the theoretically predicted behaviors and the simulated results, and the performance of the proposed scheme in terms angle-of-arrival estimation, when compared to the conventional MUSIC algorithm and a recently proposed hybrid version of MUSIC (H-MUSIC).

scholarly journals Triangular Slot-Loaded Wideband Planar Rectangular Antenna Array for Millimeter-Wave 5G Applications

Electronics ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 778
Author(s):  
Iftikhar Ahmad ◽  
Houjun Sun ◽  
Umair Rafique ◽  
Zhang Yi
Keyword(s):  
Antenna Array ◽  
Millimeter Wave ◽  
Communication Systems ◽  
Ground Plane ◽  
Simulated Data ◽  
Impedance Bandwidth ◽  
Antenna Element ◽  
Single Antenna ◽  
Rectangular Patch ◽  
Half Power

This paper presents a design of a triangular slot-loaded planar rectangular antenna array for wideband millimeter-wave (mm-wave) 5G communication systems. The proposed array realizes an overall size of 35.5 × 14.85 mm2. To excite the array elements, a four-way broadband corporate feeding network was designed and analyzed. The proposed array offered a measured impedance bandwidth in two different frequency ranges, i.e., from 23 to 24.6 GHz and from 26 to 45 GHz. The single-antenna element of the array consists of a rectangular patch radiator with a triangular slot. The partial ground plane was used at the bottom side of the substrate to obtain a wide impedance bandwidth. The peak gain in the proposed array is ≈12 dBi with a radiation efficiency of >90%. Furthermore, the array gives a half-power beamwidth (HPBW) of as low as 12.5°. The proposed array has been fabricated and measured, and it has been observed that the measured results are in agreement with the simulated data.

Overview of spatial channel models for antenna array communication systems

1998 ◽  
Vol 5 (1) ◽  
pp. 10-22 ◽  
Author(s):  
R.B. Ertel ◽  
P. Cardieri ◽  
K.W. Sowerby ◽  
T.S. Rappaport ◽  
J.H. Reed
Keyword(s):  
Antenna Array ◽  
Communication Systems ◽  
Channel Models

scholarly journals A Novel Hook-Shaped Antenna Operating at 28 GHz for Future 5G mmwave Applications

Electronics ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 673
Author(s):  
Mian Kamal ◽  
Shouyi Yang ◽  
Saad Kiani ◽  
Daniyal Sehrai ◽  
Mohammad Alibakhshikenari ◽  
...  
Keyword(s):  
Antenna Array ◽  
Communication Systems ◽  
Broad Band ◽  
High Gain ◽  
Single Element ◽  
Total Efficiency ◽  
Potential Candidate ◽  
Next Generation ◽  
Dual Beam ◽  
Element Array

To address atmospheric attenuation and path loss issues in the mmwave portion of the spectrum, high gain and narrow beam antenna systems are essential for the next generation communication networks. This paper presents a novel hook-shaped antenna array for 28 GHz 5G mmwave applications. The proposed antenna was fabricated on commercially available Rogers 5880 substrate with thickness of 0.508 mm and dimensions of 10 × 8 mm2. The proposed shape consists of a circle with an arc-shaped slot on top of it and T-shaped resonating lengths are introduced in order to attain broad band characteristics having gain of 3.59 dBi with radiation and total efficiency of 92% and 86% for single element. The proposed structure is transformed into a four-element array with total size of 26.9 × 18.5 mm2 in order to increase the gain up to 10.3 dBi at desired frequency of interest. The four-element array is designed such that it exhibits dual-beam response over the entire band of interest and the simulated results agree with fabricated prototype measurements. The proposed antenna array, because of its robustness, high gain, and dual-beam characteristics can be considered as a potential candidate for the next generation 5G communication systems.

Sign in / Sign up

Export Citation Format

Share Document