Dual circularly polarized equilateral triangular patch antenna with bow tie aperture coupling for improved axial ratio bandwidth

2007 ◽  
Author(s):  
Ajay Kumar Sharma ◽  
Raghvendra Singh ◽  
Ashok Mittal
Keyword(s):  
Patch Antenna ◽  
Axial Ratio ◽  
Circularly Polarized ◽  
Aperture Coupling ◽  
Triangular Patch ◽  
Bow Tie

A Broadband Circularly Polarized Cross-slotted Patch Antenna with Horizontal Meandered Strip (HMS)

Frequenz ◽  
2020 ◽  
Vol 74 (5-6) ◽  
pp. 191-199
Author(s):  
M. K. Verma ◽  
Binod K. Kanaujia ◽  
J. P. Saini ◽  
Padam S. Saini
Keyword(s):  
Circular Polarization ◽  
Patch Antenna ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Radiation Patterns ◽  
Circularly Polarized ◽  
Feeding Technique

AbstractA broadband circularly polarized slotted square patch antenna with horizontal meandered strip (HMS) is presented and studied. The HMS feeding technique provides the good impedance matching and broadside symmetrical radiation patterns. A set of cross asymmetrical slots are etched on the radiating patch to realize the circular polarization. An electrically small stub is added on the edge of the antenna for further improvement in performance. Measured 10-dB impedance bandwidth (IBW) and 3-dB axial ratio bandwidth (ARBW) of the proposed antenna are 32.31 % (3.14–4.35 GHz) and 20.91 % (3.34–4.12 GHz), respectively. The gain of the antenna is varied from 3.5 to 4.86dBi within 3-dB ARBW. Measured results matched well with the simulated results.

scholarly journals A Wideband Single-Fed, Circularly-Polarized Patch Antenna With Enhanced Axial Ratio Bandwidth for UHF RFID Reader Applications

IEEE Access ◽  
2018 ◽  
Vol 6 ◽  
pp. 55883-55892 ◽  
Author(s):  
Junlong Li ◽  
Hui Liu ◽  
Shuai Zhang ◽  
Miaohui Luo ◽  
Yuan Zhang ◽  
...  
Keyword(s):  
Patch Antenna ◽  
Axial Ratio ◽  
Uhf Rfid ◽  
Circularly Polarized ◽  
Rfid Reader

Compact Circularly Polarized Patch Antenna With Wide Axial-Ratio Beamwidth

2018 ◽  
Vol 17 (4) ◽  
pp. 714-718 ◽  
Author(s):  
Meng-Shuang Wang ◽  
Xiao-Qi Zhu ◽  
Yong-Xin Guo ◽  
Wen Wu
Keyword(s):  
Patch Antenna ◽  
Axial Ratio ◽  
Circularly Polarized

scholarly journals Design of a Small-Size Broadband Circularly Polarized Microstrip Antenna Array

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Pingyuan Zhou ◽  
Zhuo Zhang ◽  
Mang He ◽  
Yihang Hao ◽  
Chuanfang Zhang
Keyword(s):  
Reflection Coefficient ◽  
Antenna Array ◽  
Patch Antenna ◽  
Microstrip Antenna ◽  
Axial Ratio ◽  
Satellite Communications ◽  
Lateral Size ◽  
Circularly Polarized ◽  
Feeding Technique ◽  
Microstrip Antenna Array

A small-size 2×2 broadband circularly polarized microstrip antenna array is proposed in this article. The array has four broadband dual-feed U-slot patch antenna elements with circular polarization, and the sequential feeding technique is used to further enhance the 3 dB axial ratio bandwidth. The lateral size of the fabricated array is as small as 1.33λ0×1.33λ0, and the profile is only 0.04λ0. Measured results show that the overlapped −10 dB reflection coefficient and the 3 dB AR bandwidth is 53%, and the variation of the measured realized gain is less than 1 dB for S-band satellite communications (1.98–2.2 GHz).

Circularly Polarized Rectangular Microstrip Patch Antenna with Finite Ground Plane

2015 ◽  
Vol 4 (2) ◽  
pp. 74
Author(s):  
Sanyog Rawat ◽  
Kamlesh Kumar Sharma
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Axial Ratio ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Microstrip Patch ◽  
Rectangular Patch

<p class="Abstract"><span style="font-weight: normal;">In this paper a new geometry of patch antenna is proposed with improved bandwidth and circular polarization. The radiation performance of circularly polarized rectangular patch antenna is investigated by applying IE3D simulation software and its performance is compared with that of conventional rectangular patch antenna.</span> <span style="font-weight: normal;">Finite Ground truncation technique is used to obtain the desired results. The simulated return loss, axial ratio and smith chart with frequency for the proposed antenna is reported in this paper. It is shown that by selecting suitable ground-plane dimensions, air gap and location of the slits, the impedance bandwidth can be enhanced upto 10.15 % as compared to conventional rectangular patch (4.24%) with an axial ratio bandwidth of 4.05%.</span></p><p> </p><p> </p>

scholarly journals Miniaturized Circularly Polarized Stacked Patch Antenna on Reactive Impedance Surface for Dual-Band ISM and WiMAX Applications

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Kush Agarwal ◽  
Saugata Dutta
Keyword(s):  
Frequency Band ◽  
Patch Antenna ◽  
Axial Ratio ◽  
Dual Band ◽  
Impédance Surface ◽  
Impedance Surface ◽  
Circularly Polarized ◽  
Microstrip Patch ◽  
Lower Band ◽  
Lower Frequency Band

This paper proposes a compact microstrip patch antenna for operating in 2.4 GHz ISM and 3.5 GHz WiMAX bands with circularly polarized (CP) radiation. The CP radiation in dual-bands is a result of two multilayered truncated corner stacked square patches, while the reactive impedance surface (RIS) is used for antenna size miniaturization for the lower operating frequency band. Since the overall lateral antenna dimensions are controlled by the lower frequency band (higher wavelength), reducing the electrical size of the antenna for lower band results in overall smaller antenna dimensions. The measured 3-dB axial ratio bandwidths of the in-house fabricated antenna prototype are 6.1% (2.40–2.55 GHz) for the lower band and 5.7% (3.40–3.60 GHz) for the upper band, while the 10-dBS11bandwidths for the two bands are 8.1% (2.39–2.59 GHz) and 6.9% (3.38–3.62 GHz), respectively. The maximum gain at boresight for the lower band is 2.93 dBic at 2.5 GHz, while the gain for the upper band is 6.26 dBic at 3.52 GHz. The overall volume of the proposed antenna is 0.292λo × 0.292λo × 0.044λo, whereλois the corresponding free-space wavelength at 2.5 GHz.

Compact Dual-Band Proximity-Fed Circularly Polarized Patch Antenna for BDS Applications

Frequenz ◽  
2015 ◽  
Vol 69 (9-10) ◽  
Author(s):  
Jianxing Li ◽  
Bin He ◽  
Jing Fang ◽  
Anxue Zhang
Keyword(s):  
Patch Antenna ◽  
Branch Length ◽  
Axial Ratio ◽  
Dielectric Substrate ◽  
Satellite System ◽  
Antenna Design ◽  
Dual Band ◽  
Antenna Aperture ◽  
Small Surface ◽  
Circularly Polarized

AbstractThis paper presents a compact dual-band proximity-fed circularly polarized (CP) patch antenna for BeiDou Navigation Satellite System (BDS) operation at B1 (1,561 MHz) and B3 (1,268 MHz) bands. The antenna aperture is minimized down to 26.6 mm (λ/9 at the B3 band) in diameter and 12 mm (λ/20 at the B3 band) in thickness using high permittivity dielectric substrate and meandered slots. The antenna design features that the resonant frequency in the higher band could be tuned independently by adjusting the branch length and breadth without affecting the lower band. To achieve right-handed CP (RHCP) radiation property, quadrature phase feeding is employed together with a broadband 0°–90° hybrid utilizing a small surface mount LTCC hybrid coupler chip. Experimental results show that the RHCP gain maintains larger than 1.5 dBic and the axial ratio (AR) stays below 3 dB within the B1 and B3 bands. This antenna design is a promising candidate for small BDS arrays as well as other dual-band BDS applications.

Single-feed circularly polarized stacked patch antenna with small-frequency ratio for dual-band wireless applications

2015 ◽  
Vol 8 (8) ◽  
pp. 1207-1213 ◽  
Author(s):  
Sachin Kumar ◽  
Binod K. Kanaujia ◽  
Mukesh K. Khandelwal ◽  
A.K. Gautam
Keyword(s):  
Patch Antenna ◽  
Frequency Ratio ◽  
Axial Ratio ◽  
Dual Band ◽  
Radiation Characteristics ◽  
Small Frequency ◽  
Circularly Polarized ◽  
Wireless Applications ◽  
Microstrip Patch ◽  
Good Agreement

A single-feed dual-band circularly polarized stacked microstrip patch antenna with a small-frequency ratio is presented. Two pair of orthogonal slits is cut on the lower circular patch for achieving circular polarization and truncated corner square patch is used as the upper parasitic element. The frequency ratio of the dual-band is 1.03. The 3 dB axial ratio bandwidth is 1.3% for the upper band and 1.1% for the lower band. Proposed structure is fabricated on the FR-4 epoxy substrate and fed by SMA connector. The measured results are in good agreement with the theoretical and simulated results. The antenna shows stable radiation characteristics in both bands of operation.

Sign in / Sign up

Export Citation Format

Share Document