A study of the broadband printed rectangular slot antenna with a 3D microstrip-line feed

2005 ◽  
Author(s):  
Wen-Shan Chen ◽  
Chin-Hsin Kao
Keyword(s):  
Microstrip Line ◽  
Slot Antenna ◽  
Rectangular Slot

Ultra Wide-band Microstrip Line-fed Rectangular Slot Antenna

2007 ◽  
Vol 57 (6) ◽  
pp. 899-902
Author(s):  
T. Balakrishnan ◽  
◽  
A. Vengadarajan ◽  
Bhaskar Gupta
Keyword(s):  
Microstrip Line ◽  
Wide Band ◽  
Slot Antenna ◽  
Ultra Wide Band ◽  
Rectangular Slot

A NOVEL RECTANGULAR SLOT ANTENNA WITH EMBEDDED SELF-SIMILAR T-SHAPED STRIPS FOR WLAN APPLICATIONS

2010 ◽  
Vol 15 ◽  
pp. 19-26 ◽  
Author(s):  
Le Kang ◽  
Ying-Zeng Yin ◽  
Shou-Tao Fan ◽  
Shi-Ju Wei
Keyword(s):  
Slot Antenna ◽  
Rectangular Slot ◽  
Self Similar

scholarly journals Radiation Efficient Unidirectional Low-Profile Slot Antenna Elements for X-Band Application

2005 ◽  
Vol 3 ◽  
pp. 143-146
Author(s):  
C. Löcker ◽  
T. Vaupel ◽  
T. F. Eibert
Keyword(s):  
Parallel Plate ◽  
Radiation Efficiency ◽  
Slot Antenna ◽  
Coupling Coefficients ◽  
Rectangular Slot ◽  
Mode Suppression ◽  
Low Profile ◽  
Shorting Pin ◽  
Strong Excitation ◽  
Back Reflector

Abstract. Slots in metallic ground planes are very promising candidates for conformal antenna applications. However, a low-profile unidirectional antenna requires a back reflector close to the slot and the resulting stripline feed causes strong excitation of parallel-plate modes. In this contribution, we consider unidirectional reflector-backed slot configurations with parallel-plate mode suppression by shorting pins. Starting from a parametric study with respect to shorting pin location and back reflector distance, we present a stripline-fed rectangular slot element with radiation efficiency of more than 80% and a bandwidth of about 5% at centre frequency 10GHz. A careful optimisation of shorting pin locations guarantees reliable parallel-plate mode suppression without deteriorating the slot radiation behaviour. Coupling coefficients between parallel and aligned rectangular slot elements are presented. For increased bandwidth applications, a bow-tie slot element with about 8% bandwidth and radiation efficiency of close to 80% is proposed.

scholarly journals Reconfigurable 2×1 CPW-Fed Rectangular Slot Antenna Array (RSAA) Based on Graphene for Wireless Communications

2021 ◽  
Vol 36 (6) ◽  
pp. 788-795
Author(s):  
Dalia Elsheakh ◽  
Osama Dardeer
Keyword(s):  
Wireless Communications ◽  
Antenna Array ◽  
Coplanar Waveguide ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Average Gain ◽  
Rectangular Slot ◽  
High Data ◽  
Peak Gain

This article presents a 2×1 CPW ultra wideband rectangular slot antenna array (UWB-RSAA) with a modified circular slot shape to support a high data rate for wireless communications applications. The proposed antenna array dimensions are 0.7λ×0.8λo×0.064λo at the resonant frequency 1.8 GHz. It is fabricated on Rogers RO4003 substrate and fed by using a coplanar waveguide (CPW). A graphene layer is added on one side of the substrate to realize frequency reconfigurability and improve the array gain. The proposed array acquires -10 dB impedance bandwidth of the RSAA that extends from 1.7 GHz to 2.6 GHz, from 3.2 to 3.8 GHz, and from 5.2 GHz to 7 GHz. The proposed array achieved a realized peak gain of 7.5 dBi at 6.5 GHz at 0 Volt bias with an average gain of 4.5 dBi over the operating band. When the graphene bias is increased to 20 Volt, the antenna bandwidth extends from 1 GHz to 4 GHz and from 5 to 7 GHz with a peak gain of 14 dBi at 3.5 GHz and an average gain of 7.5 dBi. The linearly polarized operation of the proposed array over the operating bands makes it suitable for short-range wireless communications .

Sign in / Sign up

Export Citation Format

Share Document