An apply of hybrid GA for array pattern control of quasi-zenithal satellite's Earth station antenna

2002 ◽  
Author(s):  
A. Miura ◽  
M. Tanaka
Keyword(s):  
Earth Station ◽  
Array Pattern ◽  
Pattern Control

Array pattern control and synthesis

1992 ◽  
Vol 80 (1) ◽  
pp. 141-151 ◽  
Author(s):  
R.C. Hansen
Keyword(s):  
Array Pattern ◽  
Pattern Control

PENELITIAN DAN PENGEMBANGAN SENSOR AROMATIK SEBAGAI ALAT DETEKSI ALKOHOL PADA PARFUM DAN WEWANGIAN UNTUK AUTENTIKASI PRODUK PARFUM HALAL

2017 ◽  
Vol 18 (2) ◽  
pp. 302-322
Author(s):  
Fajar Hardoyono
Keyword(s):  
Sensor Array ◽  
Principal Component ◽  
Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Response Patterns ◽  
Data Recording ◽  
Analysis Method ◽  
Sample Group ◽  
Array Pattern ◽  
Group Data

Abstract: The development of aromatic sensor array instrument for the detection of alcohol in perfume. The research was conducted by developing the sensor array using 8 sensors made of metal oxide semiconductor. The sensor types used in this study consisted of TGS 813, TGS 822, TGS 2600, TGS 826, TGS 2611, TGS 2620, TGS 2612 and TGS 2602. Response patterns of 8 sensors formed a sensor array pattern used to detect the aroma of 2 groups of samples perfume made from the essential oil of ginger. The first sample group is pure ginger atsiri oil without mixed alcohol. The second sample group was made from the ginger atsiri oil mixed with alcohol with a level of 0.02 M. The results of the data recording show that the developed instrument is able to dissect the first sample group with the second sample group. Data analysis using principal component analysis method (PCA shows that the instrument is able to distinguish the contaminated alcohol perfume group 0.2 M with the alcohol-free perfume group with 100% accuracy. Keywords: Sensor Aroma, Perfume.

ACTS T1-VSAT - The intelligent earth station

1992 ◽  
Author(s):  
JOHN MANNING ◽  
JEFFREY SPIEGLER ◽  
PETER LOWRY
Keyword(s):  
Earth Station

scholarly journals Fabrication and characterization of resistive double square loop arrays for ultra-wide bandwidth microwave absorption

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ji-Young Jeong ◽  
Je-Ryung Lee ◽  
Hyeonjin Park ◽  
Joonkyo Jung ◽  
Doo-Sun Choi ◽  
...  
Keyword(s):  
Sheet Resistance ◽  
Manufacturing Process ◽  
End Milling ◽  
Milling Process ◽  
Wide Bandwidth ◽  
Machined Surface ◽  
Array Pattern ◽  
Micro End Milling ◽  
Array Structures ◽  
Printing Processes

AbstractMicrowave absorbers using conductive ink are generally fabricated by printing an array pattern on a substrate to generate electromagnetic fields. However, screen printing processes are difficult to vary the sheet resistance values for different regions of the pattern on the same layer, because the printing process deposits materials at the same height over the entire surface of substrate. In this study, a promising manufacturing process was suggested for engraved resistive double square loop arrays with ultra-wide bandwidth microwave. The developed manufacturing process consists of a micro-end-milling, inking, and planing processes. A 144-number of double square loop array was precisely machined on a polymethyl methacrylate workpiece with the micro-end-milling process. After engraving array structures, the machined surface was completely covered with the developed conductive carbon ink with a sheet resistance of 15 Ω/sq. It was cured at room temperature. Excluding the ink that filled the machined double square loop array, overflowed ink was removed with the planing process to achieve full filled and isolated resistive array patterns. The fabricated microwave absorber showed a small radar cross-section with reflectance less than − 10 dB in the frequency band range of 8.0–14.6 GHz.

Sign in / Sign up

Export Citation Format

Share Document