Development of an integrated multi-grid 3D FDTD and finite-difference heat transfer code to simulate microwave drying in multimode cavities

Author(s):  
V. Pathak ◽  
Z. Yun ◽  
M.F. Iskander
Author(s):  
Lucas Peixoto ◽  
Ane Lis Marocki ◽  
Celso Vieira Junior ◽  
Viviana Mariani

2001 ◽  
Vol 123 (6) ◽  
pp. 1159-1172 ◽  
Author(s):  
Mohammad B. Shafii ◽  
Amir Faghri ◽  
Yuwen Zhang

Analytical models for both unlooped and looped Pulsating Heat Pipes (PHPs) with multiple liquid slugs and vapor plugs are presented in this study. The governing equations are solved using an explicit finite difference scheme to predict the behavior of vapor plugs and liquid slugs. The results show that the effect of gravity on the performance of top heat mode unlooped PHP is insignificant. The effects of diameter, charge ratio, and heating wall temperature on the performance of looped and unlooped PHPs are also investigated. The results also show that heat transfer in both looped and unlooped PHPs is due mainly to the exchange of sensible heat.


2005 ◽  
Vol 127 (5) ◽  
pp. 865-871 ◽  
Author(s):  
Kazuaki Sugawara ◽  
Hiroyuki Yoshikawa ◽  
Terukazu Ota

The LES method was applied to analyze numerically an unsteady turbulent separated and reattached flow and heat transfer in a symmetric expansion plane channel of expansion ratio 2.0. The Smagorinsky model was used in the analysis and fundamental equations were discretized by means of the finite difference method, and their resulting finite difference equations were solved using the SMAC method. The calculations were conducted for Re=15,000. It is found that the present numerical results, in general, agree well with the previous experimental ones. The complicated vortical flow structures in the channel and their correlations with heat transfer characteristics are visualized through various fields of flow quantities.


Author(s):  
A. Oudrane ◽  
Benaoumeur Aour ◽  
Zeghmati Belkacem ◽  
Massaud Hamouda

This work focuses on the numerical investigation of different modes of heat exchangebetween the habitat and its environment in an extremely hot climate to optimize thermal comfort.Notably, to optimize habitable comfort, it is essential to model the solar flux and the temperatureabsorbed by the habitat walls. In this context, we have developed an analytical model to predict heatexchange for a habitat in the Adrar region. The heat transfer equations have been established in eachwall of the habitat. These equations were discretized by the finite difference method and solvedusing the Gauss algorithm. The models developed were validated with climatic data measured in theresearch unit ''URER'MS'' in Adrar. The results obtained showed that building materials andextreme weather conditions were the decisive parameters of unwanted overheating.


Sign in / Sign up

Export Citation Format

Share Document