Complexity and numerical stability investigation in concurrent dual-band modeling of ultra-wideband power amplifiers for harmonically related signals

2016 ◽  
Author(s):  
Praveen Jaraut ◽  
Meenakshi Rawat
Keyword(s):  
Power Amplifiers ◽  
Numerical Stability ◽  
Ultra Wideband ◽  
Dual Band ◽  
Stability Investigation

scholarly journals Realizing UWB Antenna Array with Dual and Wide Rejection Bands Using Metamaterial and Electromagnetic Bandgaps Techniques

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 269
Author(s):  
Ayman A. Althuwayb ◽  
Mohammad Alibakhshikenari ◽  
Bal S. Virdee ◽  
Pancham Shukla ◽  
Ernesto Limiti
Keyword(s):  
Antenna Array ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Dual Band ◽  
Area Network ◽  
Electromagnetic Bandgap ◽  
Uwb Antenna ◽  
Average Gain ◽  
Left Handed ◽  
Notched Band

This research article describes a technique for realizing wideband dual notched functionality in an ultra-wideband (UWB) antenna array based on metamaterial and electromagnetic bandgap (EBG) techniques. For comparison purposes, a reference antenna array was initially designed comprising hexagonal patches that are interconnected to each other. The array was fabricated on standard FR-4 substrate with thickness of 0.8 mm. The reference antenna exhibited an average gain of 1.5 dBi across 5.25–10.1 GHz. To improve the array’s impedance bandwidth for application in UWB systems metamaterial (MTM) characteristics were applied it. This involved embedding hexagonal slots in patch and shorting the patch to the ground-plane with metallic via. This essentially transformed the antenna to a composite right/left-handed structure that behaved like series left-handed capacitance and shunt left-handed inductance. The proposed MTM antenna array now operated over a much wider frequency range (2–12 GHz) with average gain of 5 dBi. Notched band functionality was incorporated in the proposed array to eliminate unwanted interference signals from other wireless communications systems that coexist inside the UWB spectrum. This was achieved by introducing electromagnetic bandgap in the array by etching circular slots on the ground-plane that are aligned underneath each patch and interconnecting microstrip-line in the array. The proposed techniques had no effect on the dimensions of the antenna array (20 mm × 20 mm × 0.87 mm). The results presented confirm dual-band rejection at the wireless local area network (WLAN) band (5.15–5.825 GHz) and X-band satellite downlink communication band (7.10–7.76 GHz). Compared to other dual notched band designs previously published the footprint of the proposed technique is smaller and its rejection notches completely cover the bandwidth of interfering signals.

Ultra‐wideband tapered slot antenna with dual band‐notched characteristics

2014 ◽  
Vol 8 (1) ◽  
pp. 29-38 ◽  
Author(s):  
Dae Heon Lee ◽  
Hae‐Yong Yang ◽  
Young‐Ki Cho
Keyword(s):  
Ultra Wideband ◽  
Dual Band ◽  
Slot Antenna

scholarly journals A NEW ULTRA-WIDEBAND MICROSTRIP-LINE FED ANTENNA WITH 3.5/5.5GHZ DUAL BAND-NOTCH FUNCTION

2009 ◽  
Vol 7 ◽  
pp. 79-85 ◽  
Author(s):  
Jie Ma ◽  
Ying-Zeng Yin ◽  
Shi-Gang Zhou ◽  
Luyu Zhao
Keyword(s):  
Microstrip Line ◽  
Ultra Wideband ◽  
Dual Band

scholarly journals Dual Band Notch, Compact, Low profile, Hybrid Ultra Wideband RDRA

2020 ◽  
Vol 10 (1) ◽  
pp. 166-169
Keyword(s):  
Radiation Pattern ◽  
Dielectric Resonator ◽  
Surface Current ◽  
Wide Band ◽  
Ultra Wideband ◽  
Dual Band ◽  
Ultra Wide Band ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Ground Structure

This paper presents a novel, compact Ultra Wide Band , Asymmetric Ring Rectangular Dielectric Resonator Antenna (ARRDRA), which is a unique combination of Thin Dielectric Resonator (DR), Fork shape patch and defective ground structure. The base of the proposed antenna is its Hybrid structure, which generates fundamental TM, TE and higher order modes that yields an impedance bandwidth of 119%. Proposed antenna provides a frequency range from 4.2 to 16.6 GHz with a stable radiation pattern and low cross polarization levels. Peak gain of 5.5 dB and average efficiency of 90% is obtained by the design. Antenna is elongated on a FR4 substrate of dimension 20 x 24x 2.168 mm3 and is particularly suitable for C band INSAT, Radio Altimeter, WLAN, Wi-Fi for high frequencies. Ease in fabrication due to simplicity, compactness, stable radiation pattern throughout the entire bandwidth are the key features of the presented design. Inclusion of Defective ground structure and asymmetric ring not only increases the bandwidth but also stabilize the gain and efficiency due to less surface current. Presented design launch an Ultra Wide Band antenna with sufficient band rejection at 4.48-5.34 and 5.64-8.33 GHz with stable radiation pattern and high gain.

scholarly journals Design of Ultra-Wideband Tapered Slot Patch Antenna with Reconfigurable Dual Band-Notches

2020 ◽  
Vol 55 (4) ◽  
Author(s):  
Amer Abbood Al-Behadili ◽  
Adham R. Azeez ◽  
Sadiq Ahmed ◽  
Zaid A. Abdul Hassain
Keyword(s):  
Patch Antenna ◽  
Ring Resonator ◽  
Coplanar Waveguide ◽  
Stop Band ◽  
Split Ring Resonator ◽  
Substrate Material ◽  
Ultra Wideband ◽  
Dual Band ◽  
Split Ring ◽  
Ieee 802.11A

This paper presents an ultra-wideband tapered slot patch antenna with bi-directional radiation, reconfigurable for dual band-notched capability and fed by coplanar waveguide. The proposed antenna showed excellent ultra-wideband characteristics with bandwidth of (1.9–12 GHz). In order to reduce the interference of the narrow band communications represented by Worldwide Interoperability for Microwave Access radiation in the range (3.4–3.9) GHz and standard IEEE 802.11a. application (from 5.1 GHz to 6.1 GHz), the antenna was accompanied with adjustable dual-stop band capability in these bands. The dual-band notches are achieved with aid of inserting a parasitic single split ring resonator and etching a single circular complementary circle split ring resonator. The proposed antenna used epoxy (FR4) substrate material with ????r= 4.4 and dimensions of .

Compact printed ultra-wideband antenna with dual band- notch characteristics

2011 ◽  
Author(s):  
Rezaul Azim ◽  
Mohammad Tariqul Islam ◽  
Ahmed Toaha Mobashsher ◽  
Norbahiah Misran ◽  
Baharudin Yatim
Keyword(s):  
Ultra Wideband ◽  
Dual Band ◽  
Wideband Antenna

scholarly journals Design of Two Novel Dual Band-Notched UWB Antennas

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Bing Li ◽  
Jing-song Hong
Keyword(s):  
Time Domain ◽  
Simple Structure ◽  
The Other ◽  
Ultra Wideband ◽  
Dual Band ◽  
Uwb Antennas ◽  
Monopole Antennas ◽  
Printed Monopole ◽  
The Difference ◽  
The Time Domain

Two novel dual band-notched ultra-wideband (UWB) printed monopole antennas with simple structure and small size are presented. The size of both antennas is25×25×0.8 mm3. The bandwidth of one of the proposed antenna can be from 2.7 GHz to 36.8 GHz, except the bandwidth of 3.2–3.9 GHz for WiMAX applications and 5.14–5.94 GHz for WLAN applications. The bandwidth of the other is ranging for 2.7 to 41.1 GHz, except the bandwidth of 3.2–3.9 GHz for WiMAX applications and 4.8–5.9 GHz for WLAN applications. Bandwidths of the antennas are about 512% and 455% wider than those of conventional band-notched UWB antennas, respectively. In addition, the time-domain characteristics of the two antennas are investigated to show the difference between both antennas.

Sign in / Sign up

Export Citation Format

Share Document