The coordinating control measures of reactive power and voltage in the area with large-scale wind farms

2011 ◽  
Author(s):  
Du Bo ◽  
Liu Wenying ◽  
Wang Jiaming ◽  
Cui Gang ◽  
Zhang Bolin
Keyword(s):  
Large Scale ◽  
Reactive Power ◽  
Wind Farms ◽  
Control Measures ◽  
Coordinating Control

Improving Active Output Capacity of Large-Scale Wind Farm by Installation STATCOM

2012 ◽  
Vol 588-589 ◽  
pp. 574-577 ◽  
Author(s):  
Yan Juan Wu ◽  
Lin Chuan Li
Keyword(s):  
Control Strategy ◽  
Large Scale ◽  
Wind Farm ◽  
Transient Stability ◽  
Reactive Power ◽  
Feedforward Control ◽  
Wind Farms ◽  
Active Power ◽  
Utilization Efficiency ◽  
Grid Voltage

Some faults will result wind turbine generators off-grid due to low grid voltage , furthermore, large-scale wind farms tripping can result in severe system oscillation and aggravate system transient instability . In view of this, static compensator (STATCOM) is installed in the grid containing large-scale wind farm. A voltage feedforward control strategy is proposed to adjust the reactive power of STATCOM compensation and ensure that the grid voltage is quickly restored to a safe range. The mathematical model of the doubly-fed induction wind generator (DFIG) is proposed. The control strategy of DFIG uses PI control for rotor angular velocity and active power. 4-machine system simulation results show that the STATCOM reactive power compensation significantly improve output active power of large-scale wind farm satisfying transient stability, reduce the probability of the tripping, and improve the utilization efficiency of wind farms.

scholarly journals Reactive Power Optimal Control of a Wind Farm for Minimizing Collector System Losses

Energies ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 3177 ◽  
Author(s):  
Yunqi Xiao ◽  
Yi Wang ◽  
Yanping Sun
Keyword(s):  
Large Scale ◽  
Wind Farm ◽  
Energy Savings ◽  
Reactive Power ◽  
Voltage Control ◽  
Wind Farms ◽  
Voltage Sensitivity ◽  
Voltage Control Strategy ◽  
Power Sources ◽  
Collector System

A reactive power/voltage control strategy is proposed that uses wind turbines as distributed reactive power sources to optimize the power flow in large-scale wind farms and reduce the overall losses of the collector system. A mathematical model of loss optimization for the wind farm collector systems is proposed based on a reactive power/voltage sensitivity analysis; a genetic algorithm (GA) and particle swarm optimization (PSO) algorithm are used to validate the optimization performances. The simulation model is established based on a large-scale wind farm. The results of multiple scenarios show that the proposed strategy is superior to the traditional methods with regard to the reactive power/voltage control of the wind farm and the loss reduction of the collector system. Furthermore, the advantages in terms of annual energy savings and environmental protection are also estimated.

Research on Transient Stability of Wind Farms Based on Coordinated System of SVS and STATCOM

2015 ◽  
Vol 740 ◽  
pp. 397-400
Author(s):  
Min Rui Qiao ◽  
Lin Lin Wu ◽  
Yue Qiao Li
Keyword(s):  
Wind Power ◽  
Large Scale ◽  
Transient Stability ◽  
Reactive Power ◽  
Wind Farms ◽  
Single Type ◽  
Photovoltaic Systems ◽  
Wind Power Integration ◽  
Rapid Reaction ◽  
And Performance

As large-scale wind farms are connected to the grid, a single type compensator cannot meet the demand. STATCOM has ability of rapid reaction and harmonics suppression, SVC can compensate large capacity reactive power. In this study, a compensator, which is able to coordinate Static Var System (SVS) with STATCOM is proposed. Large-scale wind power integration is simulated respectively with the compensator of STATCOM alone and coordinated compensator of SVS and STATCOM by DIgSILENT/Powerfactory15.0. Simulations results clearly verify that the compensator of SVS and STATCOM improves transient stability and performance of the photovoltaic systems.

Study on Improvement Transient Stability of the Large-Scale Wind Farms Integration with STATCOM

2013 ◽  
Vol 385-386 ◽  
pp. 1082-1085 ◽  
Author(s):  
Yan Juan Wu ◽  
Lin Chuan Li ◽  
Fang Zhang
Keyword(s):  
Power System ◽  
Control Strategy ◽  
Large Scale ◽  
Transient Stability ◽  
Reactive Power ◽  
Wind Farms ◽  
Double Loop ◽  
Loop Control ◽  
Simulation Results

In view of a serious threat for the transient stability of the power system being caused by the large-scale wind farms integration, and combining with advantages of STATCOM which can quickly restore the fault voltage and fastly, flexibly and smoothly compensate the reactive power, a method is proposed using STATCOM controller of to improve transient stability of the power system integrated by large-scale wind farms. The control strategy of the STATCOM controller uses adaptive double loop control. The role of the device to improvement transient stability of the power system is studied under the condition of serious fault. by simulation comparison with the condition without STATCOM controller installed at the same place. The simulation results show that the STATCOM controller can clearly improve transient stability of the power system integrated by large-scale wind farms.

Research on MCR Type Static Var Power Compensator Device in Wind Farms

2013 ◽  
Vol 433-435 ◽  
pp. 1325-1329
Author(s):  
Wei Zheng ◽  
Li Guang Shi ◽  
Shi Qun Li ◽  
Yong Zhi ◽  
Run Qing Bai ◽  
...  
Keyword(s):  
Large Scale ◽  
Wind Farm ◽  
Reactive Power ◽  
Power Transmission ◽  
Field Tests ◽  
Wind Farms ◽  
Facts Devices ◽  
Reactive Compensation ◽  
New Energy ◽  
Controllable Reactor

With the application of FACTS devices in large-scale new energy base, in the light of FACTS devices installed in each wind farm in Gansu Jiuquan, which can supply reactive compensation for the power transmission system and stable the grid voltage, in this paper the magnetic controllable reactor (MCR) type static var compensator (SVC) is studied deeply. The paper introduces the working principle and characteristics of the MCR-SVC. In connection with MCR equivalent circuit, the simulation model is built in MATLAB/SPS, the simulation results and field tests verify the reactive power compensation effect of MCR-SVC during wind farms.

scholarly journals Coordinated Control for Large-Scale Wind Farms with LCC-HVDC Integration

Energies ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 2207 ◽  
Author(s):  
Xiuqiang He ◽  
Hua Geng ◽  
Geng Yang ◽  
Xin Zou
Keyword(s):  
Large Scale ◽  
Reactive Power ◽  
Wind Farms ◽  
Coordinated Control ◽  
Active Power ◽  
Phase Plane Analysis ◽  
Control Loop ◽  
Control Loops ◽  
Hvdc Transmission ◽  
Control Scheme

Wind farms (WFs) controlled with conventional vector control (VC) algorithms cannot be directly integrated to the power grid through line commutated rectifier (LCR)-based high voltage direct current (HVDC) transmission due to the lack of voltage support at its sending-end bus. This paper proposes a novel coordinated control scheme for WFs with LCC-HVDC integration. The scheme comprises two key sub-control loops, referred to as the reactive power-based frequency (Q-f) control loop and the active power-based voltage (P-V) control loop, respectively. The Q-f control, applied to the voltage sources inverters in the WFs, maintains the system frequency and compensates the reactive power for the LCR of HVDC, whereas the P-V control, applied to the LCR, maintains the sending-end bus voltage and achieves the active power balance of the system. Phase-plane analysis and small-signal analysis are performed to evaluate the stability of the system and facilitate the controller parameter design. Simulations performed on PSCAD/EMTDC verify the proposed control scheme.

scholarly journals An Anti-Fluctuation Compensator Design and Its Control Strategy for Wind Farm System

Energies ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 6413
Author(s):  
Feng-Chang Gu ◽  
Hung-Cheng Chen
Keyword(s):  
Power Control ◽  
Control Strategy ◽  
Large Scale ◽  
Wind Farm ◽  
Reactive Power ◽  
Wind Farms ◽  
Voltage Regulation ◽  
Current Control ◽  
Reactive Power Control ◽  
Control Scheme

Large-scale wind farms in commercial operations have demonstrated growing influence on the stability of an electricity network and the power quality thereof. Variations in the output power of large-scale wind farms cause voltage fluctuations in the corresponding electrical networks. To achieve low-voltage ride-through capability in a doubly fed induction generator (DFIG) during a fault event, this study proposes a real-time reactive power control strategy for effective DFIG application and a static synchronous compensator (STATCOM) for reactive power compensation. Mathematic models were developed for the DFIG and STATCOM, followed by the development of an indirect control scheme for the STATCOM based on decoupling dual-loop current control. Moreover, a real-world case study on a commercial wind farm comprising 23 DFIGs was conducted. The voltage regulation performance of the proposed reactive power control scheme against a fault event was also simulated. The simulation results revealed that enhanced fault ride-through capability and prompt recovery of the output voltage provided by a wind turbine generator could be achieved using the DFIG along with the STATCOM in the event of a three-phase short-circuit fault.

scholarly journals Impact Analysis of Large-Scale Wind Farms Integration in Weak Transmission Grid from Technical Perspectives

Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5513
Author(s):  
Shah Rukh Abbas ◽  
Syed Ali Abbas Kazmi ◽  
Muhammad Naqvi ◽  
Adeel Javed ◽  
Salman Raza Naqvi ◽  
...  
Keyword(s):  
Comparative Analysis ◽  
Power System ◽  
Power Quality ◽  
Seasonal Variations ◽  
Large Scale ◽  
Reactive Power ◽  
Wind Farms ◽  
Test System ◽  
Active Power ◽  
Wake Effect

The integration of commercial onshore large-scale wind farms into a national grid comes with several technical issues that predominately ensure power quality in accordance with respective grid codes. The resulting impacts are complemented with the absorption of larger amounts of reactive power by wind generators. In addition, seasonal variations and inter-farm wake effects further deteriorate the overall system performance and restrict the optimal use of available wind resources. This paper presented an assessment framework to address the power quality issues that have arisen after integrating large-scale wind farms into weak transmission grids, especially considering inter-farm wake effect, seasonal variations, reactive power depletion, and compensation with a variety of voltage-ampere reactive (Var) devices. Herein, we also proposed a recovery of significant active power deficits caused by the wake effect via increasing hub height of wind turbines. For large-scale wind energy penetration, a real case study was considered for three wind farms with a cumulative capacity of 154.4 MW integrated at a Nooriabad Grid in Pakistan to analyze their overall impacts. An actual test system was modeled in MATLAB Simulink for a composite analysis. Simulations were performed for various scenarios to consider wind intermittency, seasonal variations across four seasons, and wake effect. The capacitor banks and various flexible alternating current transmission systems (FACTS) devices were employed for a comparative analysis with and without considering the inter-farm wake effect. The power system parameters along with active and reactive power deficits were considered for comprehensive analysis. Unified power flow controller (UPFC) was found to be the best compensation device through comparative analysis, as it maintained voltage at nearly 1.002 pu, suppressed frequency transient in a range of 49.88–50.17 Hz, and avoided any resonance while maintaining power factors in an allowable range. Moreover, it also enhanced the power handling capability of the power system. The 20 m increase in hub height assisted the recovery of the active power deficit to 48%, which thus minimized the influence of the wake effect.

scholarly journals A Model Predictive Control Strategy for Distribution Grids: Voltage and Frequency Regulation for Islanded Mode Operation

Energies ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2637 ◽  
Author(s):  
Giulio Ferro ◽  
Michela Robba ◽  
Roberto Sacile
Keyword(s):  
Model Predictive Control ◽  
Predictive Control ◽  
Distribution Systems ◽  
Large Scale ◽  
Reactive Power ◽  
Wind Farms ◽  
Local System ◽  
Frequency Regulation ◽  
Renewable Sources ◽  
Islanded Mode

In the last few years, one of the most important challenges of power technologies has been the integration of traditional energy production systems and distributed energy resources. Large-scale photovoltaic systems and wind farms may decrease the quality of the electrical grid service, mainly due to voltage and frequency peaks and fluctuations. Besides, new functionalities, such as the operation in islanded mode of some portions of the medium-voltage grid, are more and more required. In this respect, a model predictive control for voltage and frequency regulation in interconnected local distribution systems is presented. In the proposed model, each local system represents a collection of intelligent buildings and microgrids with a large capacity in active and reactive power regulation. The related model formalization includes a linear approximation of the power flow equations, based on stochastic variables related to the electrical load and to the production from renewable sources. A model predictive control problem is formalized, and a closed-loop linear control law has been obtained. In the results section, the proposed approach has been tested on the Institute of Electrical and Electronics Engineers(IEEE) 5 bus system, considering multiple loads and renewable sources variations on each local system.

scholarly journals LVRT and Stability Enhancement of Grid-Tied Wind Farm Using DFIG-Based Wind Turbine

2021 ◽  
Vol 4 (2) ◽  
pp. 33
Author(s):  
Jannatul Mawa Akanto ◽  
Md. Rifat Hazari ◽  
Mohammad Abdul Mannan
Keyword(s):  
Wind Turbines ◽  
Large Scale ◽  
Wind Farm ◽  
Reactive Power ◽  
Low Voltage ◽  
Wind Farms ◽  
Induction Generators ◽  
Control Scheme ◽  
Wide Range ◽  
Doubly Fed

According to the grid code specifications, low voltage ride-through (LVRT) is one of the key factors for grid-tied wind farms (WFs). Since fixed-speed wind turbines with squirrel cage induction generators (FSWT-SCIGs) require an adequate quantity of reactive power throughout the transient period, conventional WF consisting of SCIG do not typically have LVRT capabilities that may cause instability in the power system. However, variable-speed wind turbines with doubly fed induction generators (VSWT-DFIGs) have an adequate amount of LVRT enhancement competency, and the active and reactive power transmitted to the grid can also be controlled. Moreover, DFIG is quite expensive because of its partial rating (AC/DC/AC) converter than SCIG. Accordingly, combined installation of both WFs could be an effective solution. Hence, this paper illustrated a new rotor-side converter (RSC) control scheme, which played a significant role in ensuring the LVRT aptitude for a wide range of hybrid WF consisting of both FSWT-SCIGs and VSWT-DFIGs. What is more, the proposed RSC controller of DFIG was configured to deliver an ample quantity of reactive power to the SCIG during the fault state to make the overall system stable. Simulation analyses were performed for both proposed and traditional controllers of RSC of the DFIG in the PSCAD/EMTDC environment to observe the proposed controller response. Overall, the presented control scheme could guarantee the LVRT aptitude of large-scale SCIG.

Sign in / Sign up

Export Citation Format

Share Document