A compact array with low mutual coupling using defected ground structures

Author(s):  
A. K. Arya ◽  
A. Patnaik ◽  
M. V. Kartikeyan
2020 ◽  
Author(s):  
Yujie Zhang ◽  
Zixiang Han ◽  
Shanpu Shen ◽  
Chi Yuk Chiu ◽  
Ross Murch

<div>Versatile configurable defected ground structures</div><div>(CDGSs) for enhancing the performance of low profile antennas are introduced. It is shown that CDGS can significantly reduce mutual coupling (MC) between multiple antennas and suppress cross-polarization (XP) and enhance circular polarization (CP) excitation in single port low profile antennas for example. The key idea of CDGS is to construct defected ground structures (DGSs) from a grid of slots, which can be either opened or shorted with hardwires, so that they can be configured and optimized to enhance desired antenna performance characteristics. The</div><div>importance and versatility of the CDGS approach is that it</div><div>overcomes the issue of having to design bespoke DGS for each individual antenna design. Three design examples are provided to demonstrate the versatility of CDGSs for MC reduction, XP suppression and CP excitation. Experimental results demonstrate that MC can be reduced by up to 43 dB, XP can be suppressed by 15 dB and CP can be excited with 78 MHz (2.2%) 3-dB axial ratio (AR) bandwidth. The compactness and ease of fabrication also make the CDGS well suited to compact low profile internet of things (IoT) and wireless communication applications.</div>


2020 ◽  
Author(s):  
Yujie Zhang ◽  
Zixiang Han ◽  
Shanpu Shen ◽  
Chi Yuk Chiu ◽  
Ross Murch

<div>Versatile configurable defected ground structures</div><div>(CDGSs) for enhancing the performance of low profile antennas are introduced. It is shown that CDGS can significantly reduce mutual coupling (MC) between multiple antennas and suppress cross-polarization (XP) and enhance circular polarization (CP) excitation in single port low profile antennas for example. The key idea of CDGS is to construct defected ground structures (DGSs) from a grid of slots, which can be either opened or shorted with hardwires, so that they can be configured and optimized to enhance desired antenna performance characteristics. The</div><div>importance and versatility of the CDGS approach is that it</div><div>overcomes the issue of having to design bespoke DGS for each individual antenna design. Three design examples are provided to demonstrate the versatility of CDGSs for MC reduction, XP suppression and CP excitation. Experimental results demonstrate that MC can be reduced by up to 43 dB, XP can be suppressed by 15 dB and CP can be excited with 78 MHz (2.2%) 3-dB axial ratio (AR) bandwidth. The compactness and ease of fabrication also make the CDGS well suited to compact low profile internet of things (IoT) and wireless communication applications.</div>


2016 ◽  
Vol 52 (15) ◽  
pp. 1288-1290 ◽  
Author(s):  
Kun Wei ◽  
Jianying Li ◽  
Ling Wang ◽  
Zijian Xing ◽  
Rui Xu

2005 ◽  
Vol 41 (4) ◽  
pp. 196 ◽  
Author(s):  
S.M. Han ◽  
C.-S. Kim ◽  
D. Ahn ◽  
T. Itoh

Author(s):  
Gaurav Saxena ◽  
Priyanka Jain ◽  
Y. K. Awasthi

Abstract In this paper, a ultra-wideband (UWB) bandpass filter with stopband characteristics is presented using a multi-mode resonator (MMR) technique. An MMR is formed by loading three dumbbell-shaped (Mickey and circular) shunt stubs placed in the center and two symmetrical locations from ports, respectively. Three circular and arrowhead defected ground structures on the ground plane are introduced to achieve UWB bandwidth with a better roll-off rate. The proposed filter exhibits stopband characteristics from 10.8 to 20 GHz with a 0.4 dB return loss. The group delay and roll-off rate of the designed filter are <0.30 ns in the passband and 16 dB/GHz at lower and higher cut-off frequencies, respectively. The dimension of the filter is 0.74λg × 0.67λg mm2 and was fabricated on a cost-effective substrate. All simulated results are verified through the experimental results.


Sign in / Sign up

Export Citation Format

Share Document