scholarly journals Ultra-Wideband Filtering 180° Hybrid Coupler With Super Wide Upper Stopband Using Swap Phase Inverter and Electromagnetic Bandgap Structures on Double-Sided Parallel-Strip Line

IEEE Access ◽  
2018 ◽  
Vol 6 ◽  
pp. 41099-41106 ◽  
Author(s):  
Qiu-Sheng Shen ◽  
Ming-Jian Gao ◽  
Lin-Sheng Wu ◽  
Xi-Lang Zhou
Keyword(s):  
Ultra Wideband ◽  
Strip Line ◽  
Electromagnetic Bandgap ◽  
Phase Inverter ◽  
Parallel Strip ◽  
Hybrid Coupler

scholarly journals Compact and Wideband Parallel-Strip 180° Hybrid Coupler with Arbitrary Power Division Ratios

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Leung Chiu ◽  
Quan Xue
Keyword(s):  
Characteristic Impedance ◽  
Impedance Bandwidth ◽  
Strip Line ◽  
Simple Design ◽  
Phase Inverter ◽  
Arbitrary Power ◽  
Absolute Phase ◽  
Parallel Strip ◽  
Hybrid Coupler ◽  
Good Agreement

This paper presents a class of wideband 180° hybrid (rat race) couplers implemented by parallel-strip line. By replacing the 270° arm of a conventional 180° hybrid coupler by a 90° arm with phase inverter, the bandwidth of the coupler is greatly enhanced and the total circuit size is reduced by almost half. Simple design formulas relating the characteristic impedance of the arms and power division ration are derived. To demonstrate the concept, four couplers with different power division ratios of 1, 2, 4, and 8 were designed, fabricated, and tested. S-parameters of the coupler are simulated and measured with good agreement. All working prototypes operate more than 112% impedance bandwidth with more than 25 dB port-to-port isolation and less than 5° absolute phase imbalance. The proposed 180° hybrid couplers can be employed as a wideband in-phase/differential power divider/combiner, which are essential for many RF and microwave subsystem designs.

Cuboidal quad-port UWB-MIMO antenna with WLAN rejection using spiral EBG structures

2021 ◽  
pp. 1-8
Author(s):  
Sumon Modak ◽  
Taimoor Khan
Keyword(s):  
Close Agreement ◽  
Ground Plane ◽  
Antenna System ◽  
Ultra Wideband ◽  
Electromagnetic Bandgap ◽  
Mimo Antenna ◽  
Simulated Performance ◽  
Notched Band ◽  
Multiple Input ◽  
Band Characteristic

Abstract This study presents a novel configuration of a cuboidal quad-port ultra-wideband multiple-input and multiple-output antenna with WLAN rejection characteristics. The designed antenna consists of four F-shaped elements backed by a partial ground plane. A 50 Ω microstrip line is used to feed the proposed structure. The geometry of the suggested antenna exhibits an overall size of 23 × 23 × 19 mm3, and the antenna produces an operational bandwidth of 7.6 GHz (3.1–10.7 GHz). The notched band characteristic at 5.4 GHz is accomplished by loading a pair of spiral electromagnetic bandgap structures over the ground plane. Besides this, other diversity features such as envelope correlation coefficient, and diversity gain are also evaluated. Furthermore, the proposed antenna system provides an isolation of −15 dB without using any decoupling structure. Therefore, to validate the reported design, a prototype is fabricated and characterized. The overall simulated performance is observed in very close agreement with it's measured counterpart.

scholarly journals Realizing UWB Antenna Array with Dual and Wide Rejection Bands Using Metamaterial and Electromagnetic Bandgaps Techniques

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 269
Author(s):  
Ayman A. Althuwayb ◽  
Mohammad Alibakhshikenari ◽  
Bal S. Virdee ◽  
Pancham Shukla ◽  
Ernesto Limiti
Keyword(s):  
Antenna Array ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Dual Band ◽  
Area Network ◽  
Electromagnetic Bandgap ◽  
Uwb Antenna ◽  
Average Gain ◽  
Left Handed ◽  
Notched Band

This research article describes a technique for realizing wideband dual notched functionality in an ultra-wideband (UWB) antenna array based on metamaterial and electromagnetic bandgap (EBG) techniques. For comparison purposes, a reference antenna array was initially designed comprising hexagonal patches that are interconnected to each other. The array was fabricated on standard FR-4 substrate with thickness of 0.8 mm. The reference antenna exhibited an average gain of 1.5 dBi across 5.25–10.1 GHz. To improve the array’s impedance bandwidth for application in UWB systems metamaterial (MTM) characteristics were applied it. This involved embedding hexagonal slots in patch and shorting the patch to the ground-plane with metallic via. This essentially transformed the antenna to a composite right/left-handed structure that behaved like series left-handed capacitance and shunt left-handed inductance. The proposed MTM antenna array now operated over a much wider frequency range (2–12 GHz) with average gain of 5 dBi. Notched band functionality was incorporated in the proposed array to eliminate unwanted interference signals from other wireless communications systems that coexist inside the UWB spectrum. This was achieved by introducing electromagnetic bandgap in the array by etching circular slots on the ground-plane that are aligned underneath each patch and interconnecting microstrip-line in the array. The proposed techniques had no effect on the dimensions of the antenna array (20 mm × 20 mm × 0.87 mm). The results presented confirm dual-band rejection at the wireless local area network (WLAN) band (5.15–5.825 GHz) and X-band satellite downlink communication band (7.10–7.76 GHz). Compared to other dual notched band designs previously published the footprint of the proposed technique is smaller and its rejection notches completely cover the bandwidth of interfering signals.

Compact dual-mode dual-band balun filter using double-sided parallel-strip line

2012 ◽  
Vol 48 (21) ◽  
pp. 1351 ◽  
Author(s):  
W. Jiang ◽  
L. Zhou ◽  
A.M. Gao ◽  
W. Shen ◽  
W.Y. Yin ◽  
...  
Keyword(s):  
Dual Band ◽  
Strip Line ◽  
Dual Mode ◽  
Parallel Strip
Sign in / Sign up

Export Citation Format

Share Document