Determination of an effective coefficient of thermal expansion of electronic packaging components: a whole-field approach

1996 ◽  
Vol 19 (2) ◽  
pp. 240-247 ◽  
Author(s):  
Bongtae Han ◽  
Yifan Guo
Keyword(s):  
Thermal Expansion ◽  
Electronic Packaging ◽  
Coefficient Of Thermal Expansion ◽  
Effective Coefficient ◽  
Field Approach

Role of Out-of-Plane Coefficient of Thermal Expansion in Electronic Packaging Modeling

1999 ◽  
Vol 122 (2) ◽  
pp. 121-127 ◽  
Author(s):  
Manjula N. Variyam ◽  
Weidong Xie ◽  
Suresh K. Sitaraman
Keyword(s):  
Thermal Expansion ◽  
Electronic Packaging ◽  
Thermal Loading ◽  
Coefficient Of Thermal Expansion ◽  
Plane Deformation ◽  
Three Dimensional ◽  
Dissimilar Materials ◽  
3D Models ◽  
Material Behavior ◽  
Element Analysis

Components in electronic packaging structures are of different dimensions and are made of dissimilar materials that typically have time, temperature, and direction-dependent thermo-mechanical properties. Due to the complexity in geometry, material behavior, and thermal loading patterns, finite-element analysis (FEA) is often used to study the thermo-mechanical behavior of electronic packaging structures. For computational reasons, researchers often use two-dimensional (2D) models instead of three-dimensional (3D) models. Although 2D models are computationally efficient, they could provide misleading results, particularly under thermal loading. The focus of this paper is to compare the results from various 2D, 3D, and generalized plane-deformation strip models and recommend a suitable modeling procedure. Particular emphasis is placed to understand how the third-direction coefficient of thermal expansion (CTE) influences the warpage and the stress results predicted by 2D models under thermal loading. It is seen that the generalized plane-deformation strip models are the best compromise between the 2D and 3D models. Suitable analytical formulations have also been developed to corroborate the findings from the study. [S1043-7398(00)01402-X]

Determination of Mechanical Properties of Thin Film on Silicon Wafer

2003 ◽  
Author(s):  
Enboa Wu ◽  
Albert J. D. Yang ◽  
Ching-An Shao ◽  
C. S. Yen
Keyword(s):  
Thin Film ◽  
Mechanical Properties ◽  
Thermal Expansion ◽  
Young’S Modulus ◽  
Silicon Wafer ◽  
Coefficient Of Thermal Expansion ◽  
Young's Modulus ◽  
Poisson Ratio ◽  
Bulk State

Nondestructive determination of Young’s modulus, coefficient of thermal expansion, Poisson ratio, and thickness of a thin film has long been a difficult but important issue as the film of micrometer order thick might behave differently from that in the bulk state. In this paper, we have successfully demonstrated the capability of determining all these four parameters at one time. This novel method includes use of the digital phase-shifting reflection moire´ (DPRM) technique to record the slope of wafer warpage under temperature drop condition. In the experiment, 1-um thick aluminum was sputtered on a 6-in silicon wafer. The convolution relationship between the measured data and the mechanical properties was constructed numerically using the conventional 3D finite element code. The genetic algorithm (GA) was adopted as the searching tool for search of the optimal mechanical properties of the film. It was found that the determined data for Young’s modulus (E), Coefficient of Thermal Expansion (CTE), Poisson ratio (ν), and thickness (h) of the 1.00 um thick aluminum film were 104.2Gpa, 38.0 ppm/°C, 0.38, and 0.98 um, respectively, whereas that in the bulk state were measured to be E=71.4 Gpa, CTE=23.0 ppm/°C, and ν=0.34. The significantly larger values on the Young’s modulus and the coefficient of thermal expansion determined by this method might be attributed to the smaller dislocation density due to the thin dimension and formation of the 5-nm layer of Al2O3 formed on top of the 1-um thick sputtered film. The Young’s Modulus and the Poisson ratio of this nano-scale Al2O3 film were then determined. Their values are consistent with the physical intuition of the microstructure.

scholarly journals Determination of the linear coefficient of thermal expansion in polymer films at the nanoscale: influence of the composition of EVA copolymers and the molecular weight of PMMA

2015 ◽  
Vol 17 (28) ◽  
pp. 18495-18500 ◽  
Author(s):  
J. González-Benito ◽  
E. Castillo ◽  
J. F. Cruz-Caldito
Keyword(s):  
Molecular Weight ◽  
Thermal Expansion ◽  
Methyl Methacrylate ◽  
Polymer Films ◽  
Coefficient Of Thermal Expansion ◽  
Linear Coefficient ◽  
Poly Methyl Methacrylate ◽  
Poly Ethylene ◽  
Eva Copolymers

Nanothermal-expansion of poly(ethylene-co-vinylacetate), EVA, and poly(methyl methacrylate), PMMA, in the form of films was measured to finally obtain linear coefficients of thermal expansion, CTEs.

Sign in / Sign up

Export Citation Format

Share Document