Global bifurcation and chaos from automatic gain control loops

1993 ◽  
Vol 40 (6) ◽  
pp. 403-412 ◽  
Author(s):  
F.-J. Chang ◽  
S.-H. Twu ◽  
S. Chang
Keyword(s):  
Automatic Gain Control ◽  
Global Bifurcation ◽  
Gain Control ◽  
Bifurcation And Chaos ◽  
Control Loops

Control of Vibratory MEMS Gyroscope with the Drive Mode Excited Through Parametric Resonance

2021 ◽  
pp. 1-34
Author(s):  
Tamir Perl ◽  
Ronen Maimon ◽  
Slava Krylov ◽  
Nahum Shimkin
Keyword(s):  
Parametric Resonance ◽  
Degrees Of Freedom ◽  
Multiple Scales ◽  
Automatic Gain Control ◽  
Gain Control ◽  
Drive Mode ◽  
Mems Gyroscope ◽  
Control Loops ◽  
Mode Control ◽  
Parameters Perturbation

Abstract In this paper we present a control strategy for a MEMS gyroscope with a drive mode excited through parametric resonance. The reduced order two degrees of freedom model of the device is built and the drive mode control is implemented using Phase Locked Loop (PLL) and Automatic Gain Control (AGC) loops. A sense mode vibration control algorithm is developed as well for enhanced sensor performance. The analysis of the drive mode control loops is conducted using the multiple scales method. The robustness of the suggested control loops to parameters perturbation is demonstrated using the model. A simplified linear model of the control loops is shown to predict the device behavior with good accuracy.

scholarly journals Nonlinear Dynamics of MEMS Resonator in PLL-AGC Self-Oscillation Loop

2020 ◽  
Author(s):  
Aleksei Lukin ◽  
Dmitry Indeitsev ◽  
Ivan Popov ◽  
Yakov Belyaev
Keyword(s):  
Control System ◽  
Automatic Gain Control ◽  
Oscillation Amplitude ◽  
Gain Control ◽  
Resonant Mode ◽  
Stable Operation ◽  
Restoring Force ◽  
Control Loops ◽  
Mems Resonator ◽  
Oscillation Loop

The work is devoted to the study of a MEMS resonator dynamics under the action of phase-locked and automatic gain control loops. Particular attention is directed to the study of the nonlinearity factor of the resonator elastic restoring force. It was found that the determination of control system parameters based on the stability analysis of the operating resonant mode, in the general case, does not provide the required phase adjustment and stabilization of the oscillation amplitude. Stable multifrequency modes of oscillations are found, an analytical study of the mechanisms of their appearance and evolution is carried out under variation of the key parameters of the system. The real regions of the control system stable operation are determined (which do not coincide, as was found, with the regions of stability of the operating resonant mode, due to the presence of hidden attractors in the phase space of the system). A methodology has been developed for identifying such areas of stable operation. A significant complication of the structure of possible motions in the system with an increase in the Q-factor of the resonator is revealed.

scholarly journals Measuring Current in a Power Converter Using Fuzzy Automatic Gain Control

2021 ◽  
Vol 11 (13) ◽  
pp. 5793
Author(s):  
Bartosz Dominikowski
Keyword(s):  
High Resolution ◽  
Fuzzy Controller ◽  
Automatic Gain Control ◽  
Gain Control ◽  
Measurement Range ◽  
Power Converter ◽  
Current Measurement ◽  
Dc Power ◽  
Programmable Gain ◽  
Electric Loads

The accuracy of current measurements can be increased by appropriate amplification of the signal to within the measurement range. Accurate current measurement is important for energy monitoring and in power converter control systems. Resistance and inductive current transducers are used to measure the major current in AC/DC power converters. The output value of the current transducer depends on the load motor, and changes across the whole measurement range. Modern current measurement circuits are equipped with operational amplifiers with constant or programmable gain. These circuits are not able to measure small input currents with high resolution. This article proposes a precise loop gain system that can be implemented with various algorithms. Computer analysis of various automatic gain control (AGC) systems proved the effectiveness of the Mamdani controller, which was implemented in an MCU (microprocessor). The proposed fuzzy controller continuously determines the value of the conversion factor. The system also enables high resolution measurements of the current emitted from small electric loads (≥1 A) when the electric motor is stationary.

Dual cavity optical automatic gain control for EDFAs

2003 ◽  
Author(s):  
M.F. Krol ◽  
Yongqian Liu ◽  
J.J. Watkins ◽  
D.W. Lambert
Keyword(s):  
Automatic Gain Control ◽  
Gain Control
Sign in / Sign up

Export Citation Format

Share Document