Rectangular patch resonator with laminated ground plane

1995 ◽  
Vol 43 (12) ◽  
pp. 1361-1368 ◽  
Author(s):  
Jean-Fu Kiang
Keyword(s):  
Ground Plane ◽  
Rectangular Patch

scholarly journals Triangular Slot-Loaded Wideband Planar Rectangular Antenna Array for Millimeter-Wave 5G Applications

Electronics ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 778
Author(s):  
Iftikhar Ahmad ◽  
Houjun Sun ◽  
Umair Rafique ◽  
Zhang Yi
Keyword(s):  
Antenna Array ◽  
Millimeter Wave ◽  
Communication Systems ◽  
Ground Plane ◽  
Simulated Data ◽  
Impedance Bandwidth ◽  
Antenna Element ◽  
Single Antenna ◽  
Rectangular Patch ◽  
Half Power

This paper presents a design of a triangular slot-loaded planar rectangular antenna array for wideband millimeter-wave (mm-wave) 5G communication systems. The proposed array realizes an overall size of 35.5 × 14.85 mm2. To excite the array elements, a four-way broadband corporate feeding network was designed and analyzed. The proposed array offered a measured impedance bandwidth in two different frequency ranges, i.e., from 23 to 24.6 GHz and from 26 to 45 GHz. The single-antenna element of the array consists of a rectangular patch radiator with a triangular slot. The partial ground plane was used at the bottom side of the substrate to obtain a wide impedance bandwidth. The peak gain in the proposed array is ≈12 dBi with a radiation efficiency of >90%. Furthermore, the array gives a half-power beamwidth (HPBW) of as low as 12.5°. The proposed array has been fabricated and measured, and it has been observed that the measured results are in agreement with the simulated data.

Quad-Band multi-polarized antenna with modified electric-inductive−capacitive resonator

2021 ◽  
pp. 1-12
Author(s):  
Ghanshyam Singh ◽  
Binod Kumar Kanaujia ◽  
Vijay Kumar Pandey ◽  
Sachin Kumar
Keyword(s):  
Communication Systems ◽  
Ground Plane ◽  
Axial Ratio ◽  
Antenna Design ◽  
Planar Antenna ◽  
Rectangular Slot ◽  
Printed Circuits ◽  
Rectangular Patch ◽  
Easy Integration ◽  
Defected Ground Plane

Abstract A compact circularly polarized (CP) patch antenna is presented for modern communication systems. The prospective antenna consists of a microstrip-line inset-fed rectangular patch and a defected ground plane. A rotated rectangular slot and a modified electric-inductive-capacitive (m-ELC) resonator are introduced in the patch and the ground plane to achieve multiband behaviour. A corner of the radiating patch is truncated and an arrow-shaped stub is introduced for generating circular polarization. The physical area of the substrate is 0.26λ0 × 0.22λ0, and the radiator size is 0.16λ0 × 0.14λ0, where λ0 is the free-space wavelength estimated at the lowest frequency. The measured (S11≤-10 dB) bandwidths of the antenna are 80 MHz (3.58%) at 2.23 GHz, 75 MHz (2.64%) at 2.84 GHz, 80 MHz (2.50%) at 3.19 GHz, and 70 MHz (1.82%) at 3.83 GHz. The measured 3-dB axial ratio bandwidths are 40 MHz (1.41%), 100 MHz (3.12%), and 60 MHz (1.57%) at 2.84, 3.20 and 3.82 GHz, respectively. The proposed planar antenna design does not need dual-feed or multi-layered patches for achieving multiple CP bands. It offers easy integration with the printed circuits of the communication systems.

Compact Triple/Quadruple-Band Reconfigurable Monopole Antenna for Wireless Applications

2021 ◽  
pp. 2150277
Author(s):  
Asmaa Zugari ◽  
Wael Abd Ellatif Ali ◽  
Mohammad Ahmad Salamin ◽  
El Mokhtar Hamham
Keyword(s):  
Simple Structure ◽  
Low Cost ◽  
Ground Plane ◽  
Monopole Antenna ◽  
Pin Diode ◽  
Wireless Applications ◽  
Rectangular Patch ◽  
Antenna Performance ◽  
Compact Size ◽  
Multi Band

In this paper, a compact reconfigurable tri-band/quad-band monopole antenna is presented. To achieve the multi-band behavior, two right-angled triangles were etched in a conventional rectangular patch, and a partial ground plane is used. Moreover, the proposed multi-band antenna is printed on a low cost FR4 epoxy with compact dimensions of 0.23[Formula: see text], where [Formula: see text] is calculated at the lowest resonance frequency. To provide frequency agility, a metal strip which acts as PIN diode was embedded in the frame of the modified patch. The tri-band/quad-band antenna performance in terms of reflection coefficient, radiation patterns, peak gain and efficiency was studied. The measured results are consistent with the simulated results for both cases. The simple structure and the compact size of the proposed antenna could make it a good candidate for multi-band wireless applications.

scholarly journals A Novel Circular Slotted Microstrip-Fed Patch Antenna with three Triangle Shape Defected Ground Structure for Multiband Applications

2018 ◽  
Vol 7 (3) ◽  
pp. 56-63 ◽  
Author(s):  
A. Jaiswal ◽  
R. K. Sarin ◽  
B. Raj ◽  
S. Sukhija
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Impedance Matching ◽  
Ground Plane ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Resonant Frequencies ◽  
Wireless Applications ◽  
Rectangular Patch ◽  
Miniaturized Antenna

In this paper, a novel circular slotted rectangular patch antenna with three triangle shape Defected Ground Structure (DGS) has been proposed. Radiating patch is made by cutting circular slots of radius 3 mm from the three sides and center of the conventional rectangular patch structure and three triangle shape defects are presented on the ground layer. The size of the proposed antenna is 38 X 25 mm2. Optimization is performed and simulation results have been obtained using Empire XCcel 5.51 software. Thus, a miniaturized antenna is designed which has three impedance bandwidths of 0.957 GHz,  0.779 GHz, 0.665 GHz with resonant frequencies at 3.33 GHz, 6.97 GHz and 8.59 GHz and the corresponding return loss at the three resonant frequencies are -40 dB, -43 dB and -38.71 dB respectively. A prototype is also fabricated and tested. Fine agreement between the measured and simulated results has been obtained. It has been observed that introducing three triangle shape defects on the ground plane results in increased bandwidth, less return loss, good radiation pattern and better impedance matching over the required operating bands which can be used for wireless applications and future 5G applications.

Circularly Polarized Rectangular Microstrip Patch Antenna with Finite Ground Plane

2015 ◽  
Vol 4 (2) ◽  
pp. 74
Author(s):  
Sanyog Rawat ◽  
Kamlesh Kumar Sharma
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Axial Ratio ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Microstrip Patch ◽  
Rectangular Patch

<p class="Abstract"><span style="font-weight: normal;">In this paper a new geometry of patch antenna is proposed with improved bandwidth and circular polarization. The radiation performance of circularly polarized rectangular patch antenna is investigated by applying IE3D simulation software and its performance is compared with that of conventional rectangular patch antenna.</span> <span style="font-weight: normal;">Finite Ground truncation technique is used to obtain the desired results. The simulated return loss, axial ratio and smith chart with frequency for the proposed antenna is reported in this paper. It is shown that by selecting suitable ground-plane dimensions, air gap and location of the slits, the impedance bandwidth can be enhanced upto 10.15 % as compared to conventional rectangular patch (4.24%) with an axial ratio bandwidth of 4.05%.</span></p><p> </p><p> </p>

Compact UWB monopole antenna with reconfigurable band-notch characteristics

2019 ◽  
Vol 12 (3) ◽  
pp. 252-258 ◽  
Author(s):  
Liping Han ◽  
Jing Chen ◽  
Wenmei Zhang
Keyword(s):  
Ground Plane ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Dual Band ◽  
Radiation Patterns ◽  
Pin Diodes ◽  
Notch Band ◽  
Rectangular Patch ◽  
Compact Size ◽  
Defected Ground Plane

AbstractA compact ultra-wideband (UWB) monopole antenna with reconfigurable band-notch characteristics is demonstrated in this paper. It is comprised of a modified rectangular patch and a defected ground plane. The band-notch property in the WiMAX and WLAN bands is achieved by etching an open-ended slot on the radiating patch and an inverted U-shaped slot on the ground plane, respectively. To obtain the reconfigurable band-notch performance, two PIN diodes are inserted in the slots, and then the notch-band can be switched by changing the states of the PIN diodes. The antenna has a compact size of 0.47 λ1 × 0.27 λ1. The simulated and measured results indicate that the antenna can operate at a UWB mode, two single band-notch modes, and a dual band-notch mode. Moreover, stable radiation patterns are obtained.

scholarly journals Periodic Microstrip Leaky Wave Antenna with Double-Sided Shorting Pins and Pairs of Slots

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Yahuan Chen ◽  
Kuang Wang ◽  
Yuanxin Li ◽  
Yunliang Long
Keyword(s):  
Radiation Pattern ◽  
Structural Parameters ◽  
Ground Plane ◽  
Stop Band ◽  
Leaky Wave ◽  
Rectangular Patch ◽  
Leaky Wave Antenna ◽  
Wave Antenna ◽  
Shorting Pin ◽  
Frequency Changes

A backward to forward scanning periodic microstrip leaky wave antenna (MLWA) is presented. The proposed antenna consists of a long rectangular patch with alternating shorting pin on each side, which connects the antenna patch and the ground plane to form periodic shorting circuits. There are two pairs of slots alternately spaced on the long patch to suppress the open stop band (OSB). The OSB problem was initially reduced by optimizing the structural parameters, and the slotting on the patch further improved it. The measured radiation pattern in the y-z plane shows that the antenna can scan electronically from 142° to 39° toward the end-fire (+z direction) when the operating frequency changes from 6 GHz to 12.9 GHz. The measured gain is greater than 5 dBi over the entire operating band.

scholarly journals Metamaterial Loaded Rectangular Patch Antenna for Wireless Communication Application

2021 ◽  
Vol 9 (3) ◽  
pp. 193-197
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Negative Permittivity ◽  
Electromagnetic Analysis ◽  
Analysis Tool ◽  
Network Analyzer ◽  
Microstrip Patch ◽  
Rectangular Patch

In this paper, a metamaterial based compact multiband rectangular microstrip patch antenna is proposed. The return loss of metamaterial loaded microstrip patch antenna obtained at the resonant frequency 2.4GHz. The metamaterial structure printed on FR4 substrate at hight of 1.6mm from the ground plane. The FR4 substrate has 4.4 dielectric constant.These metamterial structures are periodic in nature and possesses negative permittivity and negative permeability. The greatest advantage of metamaterial loading will be miniaturization. This metamterial loaded rectangular patch antenna is simulated and tested using HFSS Simulator, where an electromagnetic analysis tool is used. The fabricated antennas results are measured using Vector Network Analyzer (VNA).

Sign in / Sign up

Export Citation Format

Share Document