Data-driven self-timed RSFQ high-speed test system

1997 ◽  
Vol 7 (4) ◽  
pp. 3830-3833 ◽  
Author(s):  
Z.J. Deng ◽  
N. Yoshikawa ◽  
S.R. Whiteley ◽  
T. Van Duzer
Keyword(s):  
High Speed ◽  
Test System ◽  
Data Driven ◽  
Speed Test

scholarly journals High Speed Test System of Current Pulse for Phase Change Memory Devices

2019 ◽  
Vol 1237 ◽  
pp. 042064
Author(s):  
Yuhan Wang ◽  
Ziqiang Zeng ◽  
Yuchan Wang ◽  
Xia Xu ◽  
Liangling Gu
Keyword(s):  
Phase Change ◽  
Current Pulse ◽  
High Speed ◽  
Phase Change Memory ◽  
Test System ◽  
Memory Devices ◽  
Speed Test ◽  
Change Memory

An ultra high speed test system

1989 ◽  
Vol 6 (1) ◽  
pp. 18-24
Author(s):  
F.J. Henley
Keyword(s):  
High Speed ◽  
Test System ◽  
Speed Test ◽  
Ultra High Speed

scholarly journals Research on Performance Test System of Space Harmonic Reducer in High Vacuum and Low Temperature Environment

Machines ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 1
Author(s):  
Jing Wang ◽  
Zhihua Wan ◽  
Zhurong Dong ◽  
Zhengguo Li
Keyword(s):  
Low Temperature ◽  
High Speed ◽  
Performance Test ◽  
High Reliability ◽  
High Vacuum ◽  
Test System ◽  
Low Noise ◽  
Speed Ratio ◽  
Space Harmonic ◽  
Temperature Environment

The harmonic reducer, with its advantages of high precision, low noise, light weight, and high speed ratio, has been widely used in aerospace solar wing deployment mechanisms, antenna pointing mechanisms, robot joints, and other precision transmission fields. Accurately predicting the performance of the harmonic reducer under various application conditions is of great significance to the high reliability and long life of the harmonic reducer. In this paper, a set of automatic harmonic reducer performance test systems is designed. By using the CANOpen bus interface to control the servo motor as the drive motor, through accurately controlling the motor speed and rotation angle, collecting the angle, torque, and current in real time, the life cycle test of space harmonic reducer was carried out in high vacuum and low temperature environment on the ground. Then, the collected data were automatically analyzed and calculated. The test data of the transmission accuracy, backlash, and transmission efficiency of the space harmonic reducer were obtained. It is proven by experiments that the performance data of the harmonic reducer in space work can be more accurately obtained by using the test system mentioned in this paper, which is convenient for further research on related lubricating materials.

scholarly journals Data-driven based optimization for high-speed dry cutting gear hobbing processing parameters

2021 ◽  
Vol 1827 (1) ◽  
pp. 012037
Author(s):  
Dayuan Wu ◽  
Ping Yan ◽  
Jie Pei ◽  
Hui Zhou ◽  
Runzhong Yi ◽  
...  
Keyword(s):  
High Speed ◽  
Processing Parameters ◽  
Data Driven ◽  
Dry Cutting ◽  
Gear Hobbing

scholarly journals Data-Driven Structural Health Monitoring and Damage Detection through Deep Learning: State-of-the-Art Review

Sensors ◽  
2020 ◽  
Vol 20 (10) ◽  
pp. 2778 ◽  
Author(s):  
Mohsen Azimi ◽  
Armin Eslamlou ◽  
Gokhan Pekcan
Keyword(s):  
Deep Learning ◽  
Structural Health Monitoring ◽  
Health Monitoring ◽  
High Speed ◽  
Deep Neural Networks ◽  
State Of The Art ◽  
Data Driven ◽  
Structural Health ◽  
Promising Tool ◽  
Significant Attention

Data-driven methods in structural health monitoring (SHM) is gaining popularity due to recent technological advancements in sensors, as well as high-speed internet and cloud-based computation. Since the introduction of deep learning (DL) in civil engineering, particularly in SHM, this emerging and promising tool has attracted significant attention among researchers. The main goal of this paper is to review the latest publications in SHM using emerging DL-based methods and provide readers with an overall understanding of various SHM applications. After a brief introduction, an overview of various DL methods (e.g., deep neural networks, transfer learning, etc.) is presented. The procedure and application of vibration-based, vision-based monitoring, along with some of the recent technologies used for SHM, such as sensors, unmanned aerial vehicles (UAVs), etc. are discussed. The review concludes with prospects and potential limitations of DL-based methods in SHM applications.

Contusion, dislocation, and distraction: primary hemorrhage and membrane permeability in distinct mechanisms of spinal cord injury

2007 ◽  
Vol 6 (3) ◽  
pp. 255-266 ◽  
Author(s):  
Anthony M. Choo ◽  
Jie Liu ◽  
Clarrie K. Lam ◽  
Marcel Dvorak ◽  
Wolfram Tetzlaff ◽  
...  
Keyword(s):  
Spinal Cord ◽  
Spinal Cord Injury ◽  
White Matter ◽  
Animal Models ◽  
Membrane Permeability ◽  
High Speed ◽  
Test System ◽  
Fracture Dislocation ◽  
Sprague Dawley ◽  
Cord Injury

Object In experimental models of spinal cord injury (SCI) researchers have typically focused on contusion and transection injuries. Clinically, however, other injury mechanisms such as fracture–dislocation and distraction also frequently occur. The objective of the present study was to compare the primary damage in three clinically relevant animal models of SCI. Methods Contusion, fracture–dislocation, and flexion–distraction animal models of SCI were developed. To visualize traumatic increases in cellular membrane permeability, fluorescein–dextran was infused into the cerebrospi-nal fluid prior to injury. High-speed injuries (approaching 100 cm/second) were produced in the cervical spine of deeply anesthetized Sprague–Dawley rats (28 SCI and eight sham treated) with a novel multimechanism SCI test system. The animals were killed immediately thereafter so that the authors could characterize the primary injury in the gray and white matter. Sections stained with H & E showed that contusion and dislocation injuries resulted in similar central damage to the gray matter vasculature whereas no overt hemorrhage was detected following distraction. Contusion resulted in membrane disruption of neuronal somata and axons localized within 1 mm of the lesion epicenter. In contrast, membrane compromise in the dislocation and distraction models was observed to extend rostrally up to 5 mm, particularly in the ventral and lateral white matter tracts. Conclusions Given the pivotal nature of hemorrhagic necrosis and plasma membrane compromise in the initiation of downstream SCI pathomechanisms, the aforementioned differences suggest the presence of mechanism-specific injury regions, which may alter future clinical treatment paradigms.

Rotordynamic Performance of a Rotor Supported on Bump Type Foil Gas Bearings: Experiments and Predictions

2006 ◽  
Vol 129 (3) ◽  
pp. 850-857 ◽  
Author(s):  
Luis San Andrés ◽  
Dario Rubio ◽  
Tae Ho Kim
Keyword(s):  
High Speed ◽  
Critical Speed ◽  
Load Capacity ◽  
Test System ◽  
Foil Bearings ◽  
Rotor Imbalance ◽  
Synchronous Motion ◽  
Damping Characteristics ◽  
Rotor Surface ◽  
Stiffness And Damping

Gas foil bearings (GFBs) satisfy the requirements for oil-free turbomachinery, i.e., simple construction and ensuring low drag friction and reliable high speed operation. However, GFBs have a limited load capacity and minimal damping, as well as frequency and amplitude dependent stiffness and damping characteristics. This paper provides experimental results of the rotordynamic performance of a small rotor supported on two bump-type GFBs of length and diameter equal to 38.10mm. Coast down rotor responses from 25krpm to rest are recorded for various imbalance conditions and increasing air feed pressures. The peak amplitudes of rotor synchronous motion at the system critical speed are not proportional to the imbalance introduced. Furthermore, for the largest imbalance, the test system shows subsynchronous motions from 20.5krpm to 15krpm with a whirl frequency at ∼50% of shaft speed. Rotor imbalance exacerbates the severity of subsynchronous motions, thus denoting a forced nonlinearity in the GFBs. The rotor dynamic analysis with calculated GFB force coefficients predicts a critical speed at 8.5krpm, as in the experiments; and importantly enough, unstable operation in the same speed range as the test results for the largest imbalance. Predicted imbalance responses do not agree with the rotor measurements while crossing the critical speed, except for the lowest imbalance case. Gas pressurization through the bearings’ side ameliorates rotor subsynchronous motions and reduces the peak amplitudes at the critical speed. Posttest inspection reveal wear spots on the top foils and rotor surface.

Design of an Intelligent Multi-Gyro Measurement Device

2005 ◽  
Vol 295-296 ◽  
pp. 589-594
Author(s):  
J.P. Wang ◽  
W. Zhou ◽  
W.F. Tian ◽  
Z.H. Jin
Keyword(s):  
High Speed ◽  
Dynamic Balance ◽  
Control Unit ◽  
Calibration Method ◽  
Test System ◽  
Measurement Device ◽  
Logic Control ◽  
Hardware Description ◽  
Thermal Resistors ◽  
Inertial Unit

This paper describes the design of an intelligent multi-gyro measurement device to measure and monitor an inertial unit composed of three dynamically tuned gyros (DTGs). A 16-bit microprogrammed control unit is programmed to fulfill the functions of signal processing, logic control and serial communication with a master computer. An FPGA, designed by using Verilog Hardware Description Language, is used to realize high speed 16-bit reversible counters for output pulses of the DTG digital dynamic balance circuits. The count values represent the angular motion of the inertial unit. A stepping electric bridge is employed to measure the resistance of thermal resistors within the gyros in a wide temperature environment. The resistance represents the working temperature of the gyros. An effective calibration method for the bridge is developed to eliminate the resistance measurement error. A test system is established to examine whether the device meets the user requirements. Results of the tests show that the device has a good performance. A trial use has proved that the device is stable and reliable and that it satisfies the demand of the user.

Electron-beam test system for high-speed devices

Scanning ◽  
1987 ◽  
Vol 9 (5) ◽  
pp. 201-204 ◽  
Author(s):  
M. Brunner ◽  
D. Winkler ◽  
R. Schmitt ◽  
B. Lischke
Keyword(s):  
Electron Beam ◽  
High Speed ◽  
Test System ◽  
Beam Test
Sign in / Sign up

Export Citation Format

Share Document