A new power line conditioner for harmonic compensation in power systems

1995 ◽  
Vol 10 (3) ◽  
pp. 1570-1575 ◽  
Author(s):  
H. Akagi ◽  
H. Fujita
Keyword(s):  
Power Systems ◽  
Power Line ◽  
Harmonic Compensation

scholarly journals MODELLING OF COMPACT POWER LINES WITH THE TRIANGULAR ARRANGEMENT OF WIRES

2018 ◽  
Vol 1 (12) ◽  
pp. 20-28
Author(s):  
Natal'ya Buyakova ◽  
Andrey Kryukov ◽  
Van Le
Keyword(s):  
Power Systems ◽  
Electrical Power ◽  
Power Line ◽  
Power Lines ◽  
Equivalent Circuits ◽  
Electrical Power Systems ◽  
Electricity Transmission ◽  
Phase Coordinates ◽  
Standard Design ◽  
Definition Of

Development of methods and simulars of compact lines of an electricity transmission of the increased capacity. Methods of definition of the modes of electrical power systems (EPS) on the basis of phase coordinates which basis models of elements in the form of trellised equivalent circuits with full-coherent topology are were applied. These models and methods are realized in the program Fazonord-APC complex providing modeling of the EPS stationary modes and also definition of tensions of the electromagnetic field which is created by power lines of various design. Results of modeling of the modes and electromagnetic fields on routes of the compact power line (CPL) of an electricity transmission of 220 kV with a triangular arrangement of wires are presented. For comparison similar calculations for a standard power line (SPL) of 220 kV of a standard design are executed.

scholarly journals Metrics and quantification of power‐line and pipeline resiliency in integrated gas and power systems

2021 ◽  
Author(s):  
Maosheng Sang ◽  
Yi Ding ◽  
Ming Ding ◽  
Minglei Bao ◽  
Peng Wang ◽  
...  
Keyword(s):  
Power Systems ◽  
Power Line

Optimal Placement and Sizing of Active Power Line Conditioners for Minimizing Power Quality Problems

2017 ◽  
Vol 5 (2) ◽  
pp. 267
Author(s):  
Swathisriranjani M ◽  
Mohananthini K ◽  
Ranjitha M ◽  
Baskar S ◽  
Kavitha D
Keyword(s):  
Power Systems ◽  
Distribution Systems ◽  
Optimization Technique ◽  
Harmonic Distortion ◽  
Nonlinear Problems ◽  
Optimization Method ◽  
Test System ◽  
Power Line ◽  
Active Power ◽  
Optimal Placement

<p>In this paper, a problem of allocation and sizing of multiple active power-line conditioners (aplcs) in power systems is handled with novel formulation. The utilized objective function comprises two main factors such as reduction of total harmonic distortion and the total cost of active power-line conditioners (aplcs). The formulated problem is solved by optimization technique SHUFFLE FROG LEAP ALGORITHM(SHFLA) using MATLAB. To evaluate the competence of the proposed formulation, the IEEE 18-bus  distorted distribution test system is employed and investigated with various number of aplcs placement. These cases are based on the discrete and limited size for aplcs, requiring the optimization method to solve the constrained and discrete nonlinear problems. The comparison of results in this paper showed that the proposed SHFLA is the most effective result among others in determining optimum location and size of APLC in distribution systems.</p>

scholarly journals Constrained Linear State Signal Shaping Model Predictive Control for Harmonic Compensation in Power Systems

2020 ◽  
Vol 53 (2) ◽  
pp. 6937-6942
Author(s):  
Kathrin Weihe ◽  
Carlos Cateriano Yáñez ◽  
Georg Pangalos ◽  
Gerwald Lichtenberg
Keyword(s):  
Model Predictive Control ◽  
Power Systems ◽  
Predictive Control ◽  
Harmonic Compensation ◽  
Linear State

scholarly journals Optimal Allocation of Active Power Filter On real distribution network for improvement of power quality by use of BBO: A case study

2017 ◽  
Vol 18 (1) ◽  
pp. 85-99 ◽  
Author(s):  
Emad Samadaei ◽  
Alireza Khosravi ◽  
Abdolreza Sheikholeslami
Keyword(s):  
Power Systems ◽  
Power Quality ◽  
Optimal Allocation ◽  
Distribution Network ◽  
Harmonic Distortion ◽  
Active Power Filter ◽  
Active Power ◽  
Harmonic Compensation ◽  
Power Filter

ABSTRACT:  According to development of power electronics device, harmonic distortion spread on the network. Thus harmonic is a threat for instrument, network, decreasing of line capacity and etc. Active power filter (APF) can be employed for harmonic compensation in power systems. In this paper a distorted distribution feeder is considered and analyzed from power quality viewpoint using power analyzer device and simulated in MATLAB-Mfile. Then the size and place of active power filters are determined by use of Biogeography Based Optimization (BBO). The goal of this optimization is minimizing of losses and total harmonic distortion (THD) in feeder by considering economical cost.  The performance of the approaches are assessed and appreciated by a case study on the Ghaemshahr-Iran Distribution network. Measurement is done on the city network by power analyzer CA8310. All data was collected on Computer. Then researcher algorithm BBO, it is selected the best place and size for Active power filter. The results show a good performance.

scholarly journals Substantiation of the choice of the replacement scheme of line for mathematical modeling of 20 kV power supplies.

2021 ◽  
Vol 24 (1) ◽  
pp. 69-72
Author(s):  
SKRYPNYK S. ◽  
Keyword(s):  
Power Systems ◽  
Transmission Lines ◽  
Power Supply ◽  
Electrical Equipment ◽  
Distribution Networks ◽  
Power Line ◽  
Power Lines ◽  
Electrical Networks ◽  
Overhead Lines ◽  
Replacement Scheme

In the current global economic crisis and acute shortage of energy resources, increasing importance is attached to energy saving measures, economical and careful consumption of raw materials, materials, electricity and heat, environmental safety of industrial production. During the reconstruction of existing power supply systems of industrial enterprises, modern progressive solutions should be considered and implemented, morally and physically obsolete electrical equipment should be replaced, namely the introduction of new electrical equipment for transition from 6/10 kV to 20 kV in Ukrainian power systems. It is also necessary to pay attention to the improvement of power supply circuits and distribution networks, the implementation of complex automation of complex technological processes, rational compensation of reactive power at all levels of power supply systems. In the power system, the main transport link is the power line. Power lines (transmission lines) are long conductors suspended at a safe distance from the ground overhead lines (overhead lines) or cable lines (overhead lines) in which conductors are insulated from each other and from the environment and protected by insulation and armor electricity. Power lines are the most massive elements of the power supply system, they connect the individual nodes of its circuit. Longitudinal and transverse parameters are distinguished in alternative schemes. The load current flows through the longitudinal parameters, voltage is applied to the transverse ones. The replacement circuit of the electrical network consists of replacement circuits of the following elements: power lines, transformers, reactors, capacitors, loads, power sources. Calculating the steady-state modes of power systems, the substitution schemes of the elements are given in a single-line design, because the parameters of all phases are symmetrical. In local and local electrical networks with a relatively short length and low rated voltage, the conduction currents are small compared to load currents. Therefore, in typical electrical calculations of these networks, the capacitive conductivity of the lines is not taken into account. However, for these networks, the accounting of capacitive conductivities is necessary when considering some modes, the existence of which in itself is due only to the presence of capacitive conductivities. For example, the mode of single-phase ground fault in a network with isolated or compensated neutral or analysis of the modes of operation of neutrals of electrical networks of different voltage classes cannot be performed without taking into account the capacitive conductivity of these networks. When switching the power system of Ukraine to the nominal voltage of 20 kV, it should be taken into account that the transmission line will be replaced in the sections of both the overhead power line and cable power line, namely 35, 10, 6 kV. The replacement scheme must describe all the characteristics and properties of the elements of cable and overhead lines in accordance with real conditions. Thus, it is not expedient to use simplified substitution circuits that neglect energy parameters and properties of conductors to study the parameters of transmission lines. The use of a complete "P" -shaped scheme for the analysis of the parameters of transmission lines and transmission lines for a voltage of 20 kV is the basis of mathematical modeling of the transmission system in the distribution networks of our country.

Sign in / Sign up

Export Citation Format

Share Document