A study of a land mobile satellite channel model with asymmetrical Doppler power spectrum and lognormally distributed line-of-sight component

1998 ◽  
Vol 47 (1) ◽  
pp. 297-310 ◽  
Author(s):  
M. Patzold ◽  
Yingchun Li ◽  
F. Laue
Author(s):  
Eiichi Yoshikawa ◽  
Naoya Takizawa ◽  
Hiroshi Kikuchi ◽  
Tomoaki Mega ◽  
Tomoo Ushio

Sensors ◽  
2020 ◽  
Vol 20 (2) ◽  
pp. 367 ◽  
Author(s):  
Pablo Palacios Játiva ◽  
Milton Román Cañizares ◽  
Cesar A. Azurdia-Meza ◽  
David Zabala-Blanco ◽  
Ali Dehghan Firoozabadi ◽  
...  

This paper proposes two solutions based on angle diversity receivers (ADRs) to mitigate inter-cell interference (ICI) in underground mining visible light communication (VLC) systems, one of them is a novel approach. A realistic VLC system based on two underground mining scenarios, termed as mining roadway and mine working face, is developed and modeled. A channel model based on the direct component in line-of-sight (LoS) and reflections of non-line-of-sight (NLoS) links is considered, as well as thermal and shot noises. The design and mathematical models of a pyramid distribution and a new hemi-dodecahedral distribution are addressed in detail. The performances of these approaches, accompanied by signal combining schemes, are evaluated with the baseline of a single photo-diode in reception. Results show that the minimum lighting standards established in both scenarios are met. As expected, the root-mean-square delay spread decreases as the distance between the transmitters and receivers increases. Furthermore, the hemi-dodecahedron ADR in conjunction with the maximum ratio combining (MRC) scheme, presents the best performance in the evaluated VLC system, with a maximum user data rate of 250 Mbps in mining roadway and 120 Mbps in mine working face, received energy per bit/noise power of 32 dB and 23 dB, respectively, when the bit error rate corresponds to 10 − 4 , and finally, values of 120 dB in mining roadway and 118 dB in mine working face for signal-to-interference-plus-noise ratio are observed in a cumulative distribution function.


Author(s):  
Joonas Kokkoniemi ◽  
Janne Lehtomäki ◽  
Markku Juntti

AbstractThis paper documents a simple parametric polynomial line-of-sight channel model for 100–450 GHz band. The band comprises two popular beyond fifth generation (B5G) frequency bands, namely, the D band (110–170 GHz) and the low-THz band (around 275–325 GHz). The main focus herein is to derive a simple, compact, and accurate molecular absorption loss model for the 100–450 GHz band. The derived model relies on simple absorption line shape functions that are fitted to the actual response given by complex but exact database approach. The model is also reducible for particular sub-bands within the full range of 100–450 GHz, further simplifying the absorption loss estimate. The proposed model is shown to be very accurate by benchmarking it against the exact response and the similar models given by International Telecommunication Union Radio Communication Sector. The loss is shown to be within ±2 dBs from the exact response for one kilometer link in highly humid environment. Therefore, its accuracy is even much better in the case of usually considered shorter range future B5G wireless systems.


Author(s):  
F. J. Lopez-Martinez ◽  
L. Moreno-Pozas ◽  
U. Fernandez-Plazaola ◽  
J. F. Paris ◽  
E. Martos-Naya ◽  
...  

2014 ◽  
Vol 989-994 ◽  
pp. 2232-2236 ◽  
Author(s):  
Jia Zhi Dong ◽  
Yu Wen Wang ◽  
Feng Wei ◽  
Jiang Yu

Currently, there is an urgent need for indoor positioning technology. Considering the complexity of indoor environment, this paper proposes a new positioning algorithm (N-CHAN) via the analysis of the error of arrival time positioning (TOA) and the channels of S-V model. It overcomes an obvious shortcoming that the accuracy of traditional CHAN algorithm effected by no-line-of-sight (NLOS). Finally, though MATLAB software simulation, we prove that N-CHAN’s superior performance in NLOS in the S-V channel model, which has a positioning accuracy of centimeter-level and can effectively eliminate the influence of NLOS error on positioning accuracy. Moreover, the N-CHAN can effectively improve the positioning accuracy of the system, especially in the conditions of larger NLOS error.


2020 ◽  
Vol 10 (12) ◽  
pp. 4161
Author(s):  
Qiuming Zhu ◽  
Wei Huang ◽  
Kai Mao ◽  
Weizhi Zhong ◽  
Boyu Hua ◽  
...  

In this paper, a discrete non-stationary multiple-input multiple-output (MIMO) channel model suitable for the fixed-point realization on the field-programmable gate array (FPGA) hardware platform is proposed. On this basis, we develop a flexible hardware architecture with configurable channel parameters and implement it on a non-stationary MIMO channel emulator in a single FPGA chip. In addition, an improved non-stationary channel emulation method is employed to guarantee accurate channel fading and phase, and the schemes of other key modules are also illustrated and implemented in a single FPGA chip. Hardware tests demonstrate that the output statistical properties of proposed channel emulator, i.e., the probability density function (PDF), cross-correlation function (CCF), Doppler power spectrum density (DPSD), and the power delay profile (PDP) agree well with the corresponding theoretical ones.


Sign in / Sign up

Export Citation Format

Share Document