Magnetization curve plotting from the magnetic domain images

2001 ◽  
Vol 37 (4) ◽  
pp. 2727-2730 ◽  
Author(s):  
H. Endo ◽  
S. Hayano ◽  
Y. Saito ◽  
M. Fujikura ◽  
C. Kaido
Keyword(s):  
Magnetization Curve ◽  
Magnetic Domain

Initial Magnetization Curve and Magnetic Domain Pattern of Co/Pt Multilayered Thin Film

1999 ◽  
Vol 38 (Part 1, No. 3B) ◽  
pp. 1687-1690 ◽  
Author(s):  
Te-ho Wu ◽  
Zu-yin Qiu ◽  
Wen-bin Lai ◽  
Jung-chun Huang ◽  
Jong-ching Wu
Keyword(s):  
Thin Film ◽  
Magnetization Curve ◽  
Magnetic Domain ◽  
Domain Pattern ◽  
Multilayered Thin Film ◽  
Initial Magnetization

The direct determination of magnetic domain wall profiles using a split detector STEM

1978 ◽  
Vol 36 (1) ◽  
pp. 466-467
Author(s):  
J.N. Chapman ◽  
P.E. Batson ◽  
E.M. Waddell ◽  
R.P. Ferrier
Keyword(s):  
Electron Microscope ◽  
Domain Wall ◽  
Transmission Electron Microscope ◽  
Domain Walls ◽  
Photographic Plate ◽  
Magnetic Domain ◽  
Direct Determination ◽  
Quantitative Information ◽  
Scanning Transmission Electron Microscope ◽  
Transmission Electron

By far the most commonly used mode of Lorentz microscopy in the examination of ferromagnetic thin films is the Fresnel or defocus mode. Use of this mode in the conventional transmission electron microscope (CTEM) is straightforward and immediately reveals the existence of all domain walls present. However, if such quantitative information as the domain wall profile is required, the technique suffers from several disadvantages. These include the inability to directly observe fine image detail on the viewing screen because of the stringent illumination coherence requirements, the difficulty of accurately translating part of a photographic plate into quantitative electron intensity data, and, perhaps most severe, the difficulty of interpreting this data. One solution to the first-named problem is to use a CTEM equipped with a field emission gun (FEG) (Inoue, Harada and Yamamoto 1977) whilst a second is to use the equivalent mode of image formation in a scanning transmission electron microscope (STEM) (Chapman, Batson, Waddell, Ferrier and Craven 1977), a technique which largely overcomes the second-named problem as well.

Lorentz microscopy study of magnetic domain walls in Fe-Cr-Co alloys

1978 ◽  
Vol 36 (1) ◽  
pp. 462-463
Author(s):  
Yalcin Belli
Keyword(s):  
Domain Walls ◽  
Magnetic Domain ◽  
Microscopy Study ◽  
Ferromagnetic Phase ◽  
Stable Phase ◽  
Magnetic Domains ◽  
Lorentz Microscopy ◽  
Magnetic Hardening ◽  
Electron Microscopes ◽  
Co Alloys

Fe-Cr-Co alloys have great technological potential to replace Alnico alloys as hard magnets. The relationship between the microstructures and the magnetic properties has been recently established for some of these alloys. The magnetic hardening has been attributed to the decomposition of the high temperature stable phase (α) into an elongated Fe-rich ferromagnetic phase (α1) and a weakly magnetic or non-magnetic Cr-rich phase (α2). The relationships between magnetic domains and domain walls and these different phases are yet to be understood. The TEM has been used to ascertain the mechanism of magnetic hardening for the first time in these alloys. The present paper describes the magnetic domain structure and the magnetization reversal processes in some of these multiphase materials. Microstructures to change properties resulting from, (i) isothermal aging, (ii) thermomagnetic treatment (TMT) and (iii) TMT + stepaging have been chosen for this investigation. The Jem-7A and Philips EM-301 transmission electron microscopes operating at 100 kV have been used for the Lorentz microscopy study of the magnetic domains and their interactions with the finely dispersed precipitate phases.

Magnetic Material Observation Assembly for Tem with a Eucentric Goniometer

1976 ◽  
Vol 34 ◽  
pp. 540-541
Author(s):  
K. Shi rota ◽  
A. Yonezawa ◽  
K. Shibatomi ◽  
T. Yanaka
Keyword(s):  
Magnetic Material ◽  
Electron Microscope ◽  
Magnetic Domain ◽  
Objective Lens ◽  
Magnetic Domains ◽  
Lorentz Microscopy ◽  
Transmission Electron ◽  
Correction Of Astigmatism ◽  
Single Orientation ◽  
Conventional Transmission Electron Microscope

As is well known, it is not so easy to operate a conventional transmission electron microscope for observation of magnetic materials. The reason is that the instrument requires re-alignment of the axis and re-correction of astigmatism after each specimen shift, as the lens field is greatly disturbed by the specimen. With a conventional electron microscope, furthermore, it is impossible to observe magnetic domains, because the specimen is magnetized to single orientation by the lens field. The above mentioned facts are due to the specimen usually being in the lens field. Thus, special techniques or systems are usually required for magnetic material observation (especially magnetic domain observation), for example, the technique to switch off the objective lens current and Lorentz microscopy. But these cannot give high image quality and wide magnification range, and furthermore Lorentz microscopy is very complicated.

Temperature Dependence of Magnetic Domains and Wall Structures

1972 ◽  
Vol 30 ◽  
pp. 496-497
Author(s):  
Sonoko Tsukahara ◽  
Tadami Taoka ◽  
Hisao Nishizawa
Keyword(s):  
Temperature Dependence ◽  
Domain Walls ◽  
Magnetic Domain ◽  
Iron Film ◽  
Objective Lens ◽  
Lorentz Microscopy ◽  
Domain Structures ◽  
Wall Structures ◽  
Crystal Films ◽  
Metallurgical Structure

The high voltage Lorentz microscopy was successfully used to observe changes with temperature; of domain structures and metallurgical structures in an iron film set on the hot stage combined with a goniometer. The microscope used was the JEM-1000 EM which was operated with the objective lens current cut off to eliminate the magnetic field in the specimen position. Single crystal films with an (001) plane were prepared by the epitaxial growth of evaporated iron on a cleaved (001) plane of a rocksalt substrate. They had a uniform thickness from 1000 to 7000 Å.The figure shows the temperature dependence of magnetic domain structure with its corresponding deflection pattern and metallurgical structure observed in a 4500 Å iron film. In general, with increase of temperature, the straight domain walls decrease in their width (at 400°C), curve in an iregular shape (600°C) and then vanish (790°C). The ripple structures with cross-tie walls are observed below the Curie temperature.

Domains and domain nucleation in magnetron-sputtered CoCr thin films

1993 ◽  
Vol 51 ◽  
pp. 1046-1047
Author(s):  
B. G. Demczyk
Keyword(s):  
Thin Films ◽  
Domain Structure ◽  
Magnetic Domain ◽  
Domain Size ◽  
Film Plane ◽  
Magnetic Domain Structure ◽  
Perpendicular Magnetization ◽  
Columnar Grains ◽  
Reversal Mechanism ◽  
Lorentz Transmission Electron Microscopy

CoCr thin films have been of interest for a number of years due to their strong perpendicular anisotropy, favoring magnetization normal to the film plane. The microstructure and magnetic properties of CoCr films prepared by both rf and magnetron sputtering have been examined in detail. By comparison, however, relatively few systematic studies of the magnetic domain structure and its relation to the observed film microstructure have been reported. In addition, questions still remain as to the operative magnetization reversal mechanism in different film thickness regimes. In this work, the magnetic domain structure in magnetron sputtered Co-22 at.%Cr thin films of known microstructure were examined by Lorentz transmission electron microscopy. Additionally, domain nucleation studies were undertaken via in-situ heating experiments.It was found that the 50 nm thick films, which are comprised of columnar grains, display a “dot” type domain configuration (Figure 1d), characteristic of a perpendicular magnetization. The domain size was found to be on the order of a few structural columns in diameter.

A TEM microscopical investigation of the magnetic domain structure of a metastable austenitic stainless steel

1994 ◽  
Vol 52 ◽  
pp. 696-697
Author(s):  
G. Fourlaris ◽  
T. Gladman
Keyword(s):  
Tensile Strength ◽  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Cold Rolling ◽  
Solution Treatment ◽  
Magnetic Domain ◽  
High Strength ◽  
Medium Carbon Steel ◽  
Magnetic Characteristics ◽  
Metastable Austenitic Stainless Steel

Stainless steels have widespread applications due to their good corrosion resistance, but for certain types of large naval constructions, other requirements are imposed such as high strength and toughness , and modified magnetic characteristics.The magnetic characteristics of a 302 type metastable austenitic stainless steel has been assessed after various cold rolling treatments designed to increase strength by strain inducement of martensite. A grade 817M40 low alloy medium carbon steel was used as a reference material.The metastable austenitic stainless steel after solution treatment possesses a fully austenitic microstructure. However its tensile strength , in the solution treated condition , is low.Cold rolling results in the strain induced transformation to α’- martensite in austenitic matrix and enhances the tensile strength. However , α’-martensite is ferromagnetic , and its introduction to an otherwise fully paramagnetic matrix alters the magnetic response of the material. An example of the mixed martensitic-retained austenitic microstructure obtained after the cold rolling experiment is provided in the SEM micrograph of Figure 1.

Sign in / Sign up

Export Citation Format

Share Document