Tape medium noise measurements and analysis

In this paper, we demonstrate how to reduce the noise level of expanded air from pneumatic tools. Instead of a muffler, we propose the expanded collecting system, where the air expands through the pneumatic tube and expansion collector. We have elaborated a mathematical model which illustrates the dynamics of the air flow, as well as the acoustic pressure at the end of the tube. The computational results were compared with experimental data to check the air dynamics and sound pressure. Moreover, the study presents the methodology of noise measurement generated in a pneumatic screwdriver in a quiet back room and on a window-fitting stand in a production hall. In addition, we have performed noise measurements for the pneumatic screwdriver and the pneumatic screwdriver on an industrial scale. These measurements prove the noise reduction of the pneumatic tools when the expanded collecting system is used. When the expanded collecting system was applied to the screwdriver, the measured Sound Pressure Level (SPL) decreased from 87 to 80 dB(A).

Download Full-text

Landslide geometry and activity in Villa de la Independencia (Bolivia) revealed by InSAR and seismic noise measurements

Landslides ◽

10.1007/s10346-021-01659-9 ◽

2021 ◽

Author(s):

Chuang Song ◽

Chen Yu ◽

Zhenhong Li ◽

Veronica Pazzi ◽

Matteo Del Soldato ◽

...

Keyword(s):

Time Series ◽

Seismic Noise ◽

Slip Surface ◽

Inversion Method ◽

Subsurface Structures ◽

Slip Surfaces ◽

Landslide Volume ◽

Noise Measurements ◽

Landslide Body

AbstractInterferometric Synthetic Aperture Radar (InSAR) enables detailed investigation of surface landslide movements, but it cannot provide information about subsurface structures. In this work, InSAR measurements were integrated with seismic noise in situ measurements to analyse both the surface and subsurface characteristics of a complex slow-moving landslide exhibiting multiple failure surfaces. The landslide body involves a town of around 6000 inhabitants, Villa de la Independencia (Bolivia), where extensive damages to buildings have been observed. To investigate the spatial-temporal characteristics of the landslide motion, Sentinel-1 displacement time series from October 2014 to December 2019 were produced. A new geometric inversion method is proposed to determine the best-fit sliding direction and inclination of the landslide. Our results indicate that the landslide is featured by a compound movement where three different blocks slide. This is further evidenced by seismic noise measurements which identified that the different dynamic characteristics of the three sub-blocks were possibly due to the different properties of shallow and deep slip surfaces. Determination of the slip surface depths allows for estimating the overall landslide volume (9.18 · 107 m3). Furthermore, Sentinel-1 time series show that the landslide movements manifest substantial accelerations in early 2018 and 2019, coinciding with increased precipitations in the late rainy season which are identified as the most likely triggers of the observed accelerations. This study showcases the potential of integrating InSAR and seismic noise techniques to understand the landslide mechanism from ground to subsurface.

Download Full-text

Case Study in a Working Environment Highlighting the Divergence between Sound Level and Workers’ Perception towards Noise

International Journal of Environmental Research and Public Health ◽

10.3390/ijerph17176122 ◽

2020 ◽

Vol 17 (17) ◽

pp. 6122

Author(s):

Chun-Yip Hon ◽

Illia Tchernikov ◽

Craig Fairclough ◽

Alberto Behar

Keyword(s):

Noise Exposure ◽

Health And Safety ◽

Sound Level ◽

Working Environment ◽

Noise Levels ◽

Hearing Conservation ◽

Attitudes And Perceptions ◽

Noise Measurements ◽

Survey Responses ◽

Excessive Noise

Excessive noise levels are a prevalent issue in food processing operations and, although there have been numerous studies on occupational noise, no single study has used a concurrent mixed-methods approach. Employing this study design allows for an understanding of the level of convergence (similarity) between measured noise levels and workers’ attitudes and perceptions towards noise. This, in turn, allows for the identification of potential challenges with respect to the implementation of hearing conservation efforts. In this study, spot noise measurements were collected using a sound level meter. One-on-one interviews were conducted with workers to determine attitudes and perceptions towards noise in their workplaces. Subsequently, the results of the noise measurements (quantitative data) were integrated with the survey responses (qualitative data) to identify convergence. The majority of the noise measurements were found to exceed 85 dBA—the criterion mandated by the local occupational health and safety legislation. Although all study participants felt that it was noisy in the workplace, a large proportion of respondents indicated that the noise was not bothersome. With workers’ perception being contradictory to the measured noise levels, it is a challenge to implement hearing conservation measures unless changes are made to raise the awareness of the risks associated with excessive noise exposure.

Download Full-text