Ba ferrite thin films with large saturation magnetization deposited by sputtering in mixture of Xe, Ar and O/sub 2/

1994 ◽  
Vol 30 (6) ◽  
pp. 4053-4055 ◽  
Author(s):  
N. Matsushita ◽  
K. Noma ◽  
M. Naoe
Keyword(s):  
Thin Films ◽  
Saturation Magnetization ◽  
Ferrite Thin Films

The Structure and Magnetic Properties of NiZn-Ferrite Films Deposited by Magnetron Sputtering at Room Temperature

2013 ◽  
Vol 690-693 ◽  
pp. 1702-1706 ◽  
Author(s):  
Shuang Jun Nie ◽  
Hao Geng ◽  
Jun Bao Wang ◽  
Lai Sen Wang ◽  
Zhen Wei Wang ◽  
...  
Keyword(s):  
Thin Films ◽  
Magnetic Properties ◽  
Magnetron Sputtering ◽  
Saturation Magnetization ◽  
Room Temperature ◽  
Oxygen Flow ◽  
Flow Ratio ◽  
Study Results ◽  
Ferrite Thin Films ◽  
Ferrite Films

NiZn-ferrite thin films were deposited onto silicon and glass substrates by radio frequency magnetron sputtering at room temperature. The effects of the relative oxygen flow ratio on the structure and magnetic properties of the thin films were investigated. The study results reveal that the films deposited under higher relative oxygen flow ratio show a better crystallinity. Static magnetic measurement results indicated that the saturation magnetization of the films was greatly affected by the crystallinity, grain dimension, and cation distribution in the NiZn-ferrite films. The NiZn-ferrite thin films with a maximum saturation magnetization of 151 emucm-3, which is about 40% of the bulk NiZn ferrite, was obtained under relative oxygen flow ratio of 60%.

Comparison Between In-situ Annealing and External Annealing For Barium Ferrite Thin Films Made by RF Magnetron Sputtering

2005 ◽  
Vol 875 ◽  
Author(s):  
A. R. Abuzir ◽  
W. J. Yeh
Keyword(s):  
Thin Films ◽  
Magnetron Sputtering ◽  
Saturation Magnetization ◽  
Barium Ferrite ◽  
Rf Magnetron Sputtering ◽  
Silicon Substrates ◽  
Axis Orientation ◽  
Average Value ◽  
Ferrite Thin Films

AbstractDue to their large magnetic anisotropy perpendicular to the film plane, barium ferrite thick films (BaFe12O19, or BaM) with c-axis orientation are attractive candidates for microwave applications [1,2]. Barium ferrite thin films on silicon substrates without under layer have been deposited under various conditions by RF magnetron sputtering. The structure of the as-grown films is amorphous. External annealing in air has been done at 950°C for ten minutes to crystallize the films. C-axis oriented thin films with squareness of about 0.87 and coercivity of about 3.8KOe are obtained.Thick BaM films with c-axis orientation are difficult to achieve with one single deposition. Multilayer technique looks promising to grow thick films [3]. The external annealing process is difficult to incorporate with the multilayer procedure. An in-situ annealing procedure has been developed to obtain films, which can be used as the basic component for future multilayer deposition. Barium ferrites are first magnetron sputtered on bare silicon substrates in Ar + O2 atmosphere at substrate temperature of 500-600°C, the deposition pressure was kept about 0.008 torr. After the deposition, the temperature of the substrate is immediately increased to about 860°C for ten minutes in 140 torr of argon (80%) and oxygen (20%) mixture of gas, which was introduced into the chamber without breaking the vacuum. With the in-situ process, c-axis oriented thin films of 0.88 squareness and coercivity value of about 4.3KOe are obtained.Both annealing methods seem to have the similar effect on the perpendicular squareness and coercivity at various film thicknesses. The average value of the saturation magnetization Ms obtained from the in-situ annealing using multilayer technique is higher than that of the external one. We have grown films up to 1.0 micron thickness using the multilayer technique, in which three layers of 0.3 μm thickness each are deposited until the final thickness is reached. After the deposition of each layer, it was in-situ annealed before starting the deposition of the next layer. With the multilayer technique, coercivity of about 3.5 KOe and average value of the saturation magnetization Ms of about 4.0 K Gauss is obtained.

Deposition and Properties of Epitaxial Ferrite Thin Films

1993 ◽  
Vol 317 ◽  
Author(s):  
Julia M. Phillips ◽  
R. B. Van Dover ◽  
E. M. Gyorgy ◽  
J. H. Marshall
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Saturation Magnetization ◽  
Spinel Structure ◽  
Pulsed Laser ◽  
Epitaxial Films ◽  
Laser Deposition ◽  
Ferrite Thin Films

ABSTRACTWe have grown thin films and multilayers of several ferrite materials with the spinel structure by pulsed laser deposition of stoichiometric targets. Epitaxial films can be grown on a variety of substrates including MgO, Al2O3, MgAl2O4, Y-stabilized ZrO2 (YSZ) and SrTiO3. Films on Mg- and Al-containing substrates have a low saturation Magnetization, Ms, while films on YSZ and SrTiO3 exhibit bulk values of Ms. The anisotropy can be lowered by a post growth anneal, resulting in a film with a permeability of 28.

scholarly journals An advancement in the synthesis of unique soft magnetic CoCuFeNiZn high entropy alloy thin films

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Chokkakula L. P. Pavithra ◽  
Reddy Kunda Siri Kiran Janardhana ◽  
Kolan Madhav Reddy ◽  
Chandrasekhar Murapaka ◽  
Joydip Joardar ◽  
...  
Keyword(s):  
Thin Films ◽  
Saturation Magnetization ◽  
Functional Materials ◽  
Single Step ◽  
High Entropy Alloy ◽  
High Saturation Magnetization ◽  
Soft Magnetic ◽  
High Entropy ◽  
High Saturation ◽  
Electrochemical Approach

AbstractDiscovery of advanced soft-magnetic high entropy alloy (HEA) thin films are highly pursued to obtain unidentified functional materials. The figure of merit in current nanocrystalline HEA thin films relies in integration of a simple single-step electrochemical approach with a complex HEA system containing multiple elements with dissimilar crystal structures and large variation of melting points. A new family of Cobalt–Copper–Iron–Nickel–Zinc (Co–Cu–Fe–Ni–Zn) HEA thin films are prepared through pulse electrodeposition in aqueous medium, hosts nanocrystalline features in the range of ~ 5–20 nm having FCC and BCC dual phases. The fabricated Co–Cu–Fe–Ni–Zn HEA thin films exhibited high saturation magnetization value of ~ 82 emu/g, relatively low coercivity value of 19.5 Oe and remanent magnetization of 1.17%. Irrespective of the alloying of diamagnetic Zn and Cu with ferromagnetic Fe, Co, Ni elements, the HEA thin film has resulted in relatively high saturation magnetization which can provide useful insights for its potential unexplored applications.

scholarly journals The role of iron in magnetic damping of Mg(Al,Fe)2O4 spinel ferrite thin films

2020 ◽  
Vol 116 (14) ◽  
pp. 142406 ◽  
Author(s):  
Jacob J. Wisser ◽  
Lauren J. Riddiford ◽  
Aaron Altman ◽  
Peng Li ◽  
Satoru Emori ◽  
...  
Keyword(s):  
Thin Films ◽  
Spinel Ferrite ◽  
Magnetic Damping ◽  
Ferrite Thin Films

Correlation of grain boundary nature with magnetization in RF-sputtered lithium–zinc ferrite thin films

2009 ◽  
Vol 321 (20) ◽  
pp. 3373-3379 ◽  
Author(s):  
Lakshmikanta Aditya ◽  
J. Nanda ◽  
I. Samajdar ◽  
N. Venkataramani ◽  
Shiva Prasad
Keyword(s):  
Thin Films ◽  
Grain Boundary ◽  
Zinc Ferrite ◽  
Ferrite Thin Films
Sign in / Sign up

Export Citation Format

Share Document