The finite-element modeling of three-dimensional time-domain electromagnetic fields in strongly inhomogeneous media

1992 ◽  
Vol 28 (2) ◽  
pp. 1130-1133 ◽  
Author(s):  
G. Mur
Keyword(s):  
Finite Element ◽  
Finite Element Modeling ◽  
Electromagnetic Fields ◽  
Time Domain ◽  
Three Dimensional ◽  
Inhomogeneous Media ◽  
Element Modeling ◽  
Time Domain Electromagnetic

Three-Dimensional Finite Element Modeling of Drilling Processes

2006 ◽  
Author(s):  
T. D. Marusich ◽  
S. Usui ◽  
R. Aphale ◽  
N. Saini ◽  
R. Li ◽  
...  
Keyword(s):  
Finite Element ◽  
Finite Element Modeling ◽  
Three Dimensional ◽  
Constitutive Models ◽  
Simulation Software ◽  
Process Conditions ◽  
Third Wave ◽  
Element Modeling ◽  
Drill Point ◽  
Three Dimensional Finite Element

The three dimensional (3D) finite element modeling (FEM) and experimental validation of drilling are presented. The Third Wave AdvantEdge machining simulation software is applied for the FEM. It includes fully adaptive unstructured mesh generation, thermo-mechanically coupling, deformable tool-chip-workpiece contact, interfacial heat transfer across the tool-chip boundary, and constitutive models appropriate for process conditions and finite deformation analyses. The workpiece is modeled with a predrilled cone-shape blind hole to enable the early full-engagement of the whole drill point region to reduce the simulation time. Drilling experiments are conducted on the Ti-6Al-4V using a twist drill geometry. The calculated cutting force and torque are compared with the results of experiments with good agreement. Effects of process parameters on the stress and temperature distributions of the drill and workpiece are investigated in detail using the FEM.

Combining Serial Sectioning, EBSD Analysis, and Image-Based Finite Element Modeling

MRS Bulletin ◽  
2008 ◽  
Vol 33 (6) ◽  
pp. 597-602 ◽  
Author(s):  
G. Spanos ◽  
D.J. Rowenhorst ◽  
A.C. Lewis ◽  
A.B. Geltmacher
Keyword(s):  
Finite Element ◽  
Finite Element Modeling ◽  
Electron Backscatter Diffraction ◽  
Three Dimensional ◽  
Research Area ◽  
Polycrystalline Materials ◽  
Serial Sectioning ◽  
3D Fem ◽  
Element Modeling ◽  
The Status

AbstractThis article first provides a brief review of the status of the subfield of three-dimensional (3D) materials analyses that combine serial sectioning, electron backscatter diffraction (EBSD), and finite element modeling (FEM) of materials microstructures, with emphasis on initial investigations and how they led to the current state of this research area. The discussions focus on studies of the mechanical properties of polycrystalline materials where 3D reconstructions of the microstructure—including crystallographic orientation information—are used as input into image-based 3D FEM simulations. The authors' recent work on a β-stabilized Ti alloy is utilized for specific examples to illustrate the capabilities of these experimental and modeling techniques, the challenges and the solutions associated with these methods, and the types of results and analyses that can be obtained by the close integration of experiments and simulations.

scholarly journals Finite element simulation of the impedance response of a vascular segment as a function of changes in electrode configuration

2020 ◽  
Vol 11 (1) ◽  
pp. 112-131
Author(s):  
M. Amini ◽  
H. Kalvøy ◽  
Ø.G. Martinsen
Keyword(s):  
Finite Element ◽  
Finite Element Modeling ◽  
Experimental Measurement ◽  
Three Dimensional ◽  
Electrode Configuration ◽  
Element Modeling ◽  
3D Measurements ◽  
Element Simulation ◽  
Vascular Segment ◽  
Set Up

AbstractMonitoring a biological tissue as a three dimensional (3D) model is of high importance. Both the measurement technique and the measuring electrode play substantial roles in providing accurate 3D measurements. Bioimpedance spectroscopy has proven to be a noninvasive method providing the possibility of monitoring a 3D construct in a real time manner. On the other hand, advances in electrode fabrication has made it possible to use flexible electrodes with different configurations, which makes 3D measurements possible. However, designing an experimental measurement set-up for monitoring a 3D construct can be costly and time consuming and would require many tissue models. Finite element modeling methods provide a simple alternative for studying the performance of the electrode and the measurement set-up before starting with the experimental measurements. Therefore, in this study we employed the COMSOL Multiphysics finite element modeling method for simulating the effects of changing the electrode configuration on the impedance spectroscopy measurements of a venous segment. For this purpose, the simulations were performed for models with different electrode configurations. The simulation results provided us with the possibility of finding the optimal electrode configuration including the geometry, number and dimensions of the electrodes, which can be later employed in the experimental measurement set-up.

Sign in / Sign up

Export Citation Format

Share Document