High speed, high accuracy 2D laser line profile sensor is easy to set up, configure and adapt

Sensor Review ◽  
2006 ◽  
Vol 26 (4) ◽  
Keyword(s):  
Line Profile ◽  
High Speed ◽  
High Accuracy ◽  
Laser Line ◽  
Set Up

Metrology Performance of Laser Line Scanning of Additive Manufacturing Fixtures Based on Geometrical Product Specification (GPS)

2017 ◽  
Vol 870 ◽  
pp. 153-158
Author(s):  
Min Zhang ◽  
Bart Boeckmans ◽  
Jean Pierre Kruth ◽  
Wim Dewulf ◽  
Zhao Yao Shi
Keyword(s):  
Additive Manufacturing ◽  
Coordinate System ◽  
High Speed ◽  
Laser Line ◽  
Time Consumption ◽  
Maximum Benefit ◽  
Line Scanning ◽  
Set Up ◽  
Geometrical Product Specification ◽  
Product Specification

To gain a maximum benefit of high-speed optical scanning in the metrological calibration of emerging AM (Additive Manufacturing) fixtures it is necessary to investigate the metrology performance of laser line scanning in particular on coordinate measuring machines (CMMs) based on new generation of Geometrical Product Specification standard. A set of designed experiments was set up both on an actual fixture and artefacts manufactured by the Additive Manufacturing company, Materialise-RapidFit+. It enables to identify the influence of a fixture’s geometrical characteristic, material, colour, transparency and roughness, as well as of the alignment of the part coordinate system (PCS) mathematically relating to the machine coordinate system (MCS). Performance measures that were tracked included inspection accuracy, measuring repeatability and time consumption. Results demonstrate that the laser line scanning strategy enables to lower the time consumption in the order of 49% for a fixture with six locators mounted on it and a PC with 128GB RAM, especially providing a superior accuracy performance for complex geometries compared to a tactile measuring strategy.

scholarly journals Multi-Touch Interaction Generation Device by Spatiotemporally Switching Electrodes

Electronics ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 1475
Author(s):  
Masahiro Okamoto ◽  
Kazuya Murao
Keyword(s):  
High Speed ◽  
High Accuracy ◽  
Conductive Ink ◽  
Control Board ◽  
Touch Panel ◽  
Electrode Size ◽  
Touch Input ◽  
Touch Interaction ◽  
Multiple Electrodes ◽  
Touch Panels

With the spread of devices equipped with touch panels, such as smartphones, tablets, and laptops, the opportunity for users to perform touch interaction has increased. In this paper, we constructed a device that generates multi-touch interactions to realize high-speed, continuous, or hands-free touch input on a touch panel. The proposed device consists of an electrode sheet printed with multiple electrodes using conductive ink and a voltage control board, and generates eight multi-touch interactions: tap, double-tap, long-press, press-and-tap, swipe, pinch-in, pinch-out, and rotation, by changing the capacitance of the touch panel in time and space. In preliminary experiments, we investigated the appropriate electrode size and spacing for generating multi-touch interactions, and then implemented the device. From the evaluation experiments, it was confirmed that the proposed device can generate multi-touch interactions with high accuracy. As a result, tap, press-and-tap, swipe, pinch-in, pinch-out, and rotation can be generated with a success rate of 100%. It was confirmed that all the multi-touch interactions evaluated by the proposed device could be generated with high accuracy and acceptable speed.

Cost Effective Swath Bathymetry

2001 ◽  
Vol 35 (4) ◽  
pp. 33-45 ◽  
Author(s):  
Peter Hogarth
Keyword(s):  
Processing Time ◽  
Cost Effective ◽  
High Accuracy ◽  
High Coverage ◽  
Swath Bathymetry ◽  
World Survey ◽  
Set Up ◽  
Very High ◽  
Harbor Area ◽  
Wide Swath

Between 23rd and 25th July 2001 GeoSwath, a high specification shallow water wide swath bathymetry system, was used to survey the entire Portsmouth NH Harbor area. This paper deals with the results of this survey, illustrating the potential for significant reductions in the high costs, which have prevented widespread proliferation of Swath Bathymetry systems to date. Data, including a complete DTM gridded to 1 m resolution, will be presented and discussed in detail. These results show that the system is very easy to set up and use, requires greatly reduced boat and processing time, whilst offering high accuracy and very high coverage and resolution when used in a real-world survey of a dynamic harbor environment.

Study on Magnetic Barrel Machine Equipped with Three-Dimensional Arrangement of Magnets

2007 ◽  
Vol 329 ◽  
pp. 761-766 ◽  
Author(s):  
Y. Zhang ◽  
Masato Yoshioka ◽  
Shin-Ichiro Hira
Keyword(s):  
High Speed ◽  
Permanent Magnets ◽  
Three Dimensional ◽  
Video Camera ◽  
High Speed Video ◽  
High Speed Video Camera ◽  
The Media ◽  
Set Up

At present, a commercially available magnetic barrel machine equipped with permanent magnets has some faults arising from constructional reason. That is, grinding or finishing ability is different from place to place in the machining region, resulting in the limitation on the region we can use in the container of workpieces. Therefore, in this research, authors made the new magnetic barrel machine equipped with three dimensional (3D) magnet arrangement to overcome these faults. The grinding ability of the new 3D magnetic barrel machine converted was experimentally examined, and compared with that of the traditional magnetic barrel machine. As a result, it was shown that we can use much broader region in the new 3D machine. It was also shown that the grinding ability became higher. The distribution of barrel media in action was recorded by means of a high speed video camera. It was clarified that the media rose up higher and were distributed more uniformly in the container by the effect of the magnet block newly set up. It was supposed that this must be the reason for the above-mentioned improvement of grinding ability.

Effect of Nanosized Filler on Matrix Dominated Properties of Fiber Reinforced Epoxy

2011 ◽  
Author(s):  
Yuanxin Zhou ◽  
Shaik Jeelani
Keyword(s):  
Compression Strength ◽  
High Speed ◽  
High Vacuum ◽  
Trapped Air ◽  
Nano Fiber ◽  
Open Hole ◽  
Set Up ◽  
Mechanical Agitator ◽  
Laminar Shear ◽  
Nanosized Filler

In this study, a high-intensity ultrasonic liquid processor was used to obtain a homogeneous molecular mixture of epoxy resin and carbon nano fiber. The carbon nano fibers were infused into the part A of SC-15 (diglycidylether of Bisphenol A) through sonic cavitations and then mixed with part B of SC-15 (cycloaliphatic amine hardener) using a high-speed mechanical agitator. The trapped air and reaction volatiles were removed from the mixture using high vacuum. Nanophased epoxy with 2 wt.% CNF was then utilized in a vacuum assisted resin transfer molding (VARTM) set up with carbon fabric to fabricate laminated composites. The effectiveness of CNF addition on matrix dominated properties of composites has been evaluated by compression, open hole compression and inter-laminar shear. The compression strength, open hole compression strength and ILS were improved by 21%, 23% and 15%, respectively as compared to the neat composite.

Effect of Air Fraction on Force Coefficients in Oscillatory Flow

2021 ◽  
Author(s):  
Malene Hovgaard Vested ◽  
Erik Damgaard Christensen
Keyword(s):  
High Speed ◽  
Offshore Structures ◽  
Air Injection ◽  
Wave Loads ◽  
Morison Equation ◽  
Force Coefficients ◽  
Air Content ◽  
Set Up ◽  
High Level ◽  
Spilling Breakers

Abstract The forces on marine and offshore structures are often affected by spilling breakers. The spilling breaker is characterized by a roller of mixed air and water with a forward speed approximately equal to the wave celerity. This high speed in the top of the wave has the potential to induce high wave loads on upper parts of the structures. This study analyzed the effect of the air content on the forces. The analyses used the Morison equation to examine the effect of the percentage of air on the forces. An experimental set-up was developed to include the injection of air into an otherwise calm water body. The air-injection did introduce a high level a turbulence. It was possible to assess the amount of air content in the water for different amounts of air-injection. In the mixture of air and water the force on an oscillating square cylinder was measured for different levels of air-content, — also in the case without air. The measurements indicated that force coefficients for clear water could be use in the Morison equation as long as the density for water was replaced by the density for the mixture of air and water.

scholarly journals Pitting Corrosion of Natural Aged Al–Mg–Si Extrusion Profile

Materials ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1081 ◽  
Author(s):  
Quanmei Guan ◽  
Jing Sun ◽  
William Wang ◽  
Junfeng Gao ◽  
Chengxiong Zou ◽  
...  
Keyword(s):  
Pitting Corrosion ◽  
High Speed ◽  
Three Dimensional ◽  
Optical Microscope ◽  
Damage Initiation ◽  
Coarse Grains ◽  
Corrosion Risk ◽  
Heterogeneous Microstructures ◽  
Set Up ◽  
Pit Depth

With the quick development of the high-speed railway and the service of the China Railway High-speed (CRH) series for almost a decade, one of the greatest challenges is the management/maintenance of these trains in environmental conditions. It is critical to estimate pitting damage initiation and accumulation and set up a corresponding database in order to support the foundations for interactive corrosion risk management. In this work, the pitting corrosion of a nature-aged commercial 6005A-T6 aluminum extrusion profile for 200 days was studied comprehensively. The heterogeneous microstructures were conventionally identified by the in situ eddy current, suggesting which investigated regions to fabricate samples for. After constant immersion for 240 h in 3.5 wt % NaCl, the shapes and depths of the pits were captured and measured by optical microscope (OM) and three-dimensional optical profilometry (OP), providing detailed quantification of uniform pitting corrosion. The typical features of the pits dominated by the distribution of precipitates include the peripheral dissolution of the Al matrix, channeling corrosion, intergranular attack, and large pits in the grains. Due to the high density of continuous anodic and cathodic particles constituted by alloying elements in coarse grains, the number of pits in the coarse grains was the highest while the number in the fine grains was the lowest, indicating that fine grains have the best corrosion resistance. The experimental dataset of the pit depth integrated with its corresponding microstructure would set the benchmark for further modeling of the pit depth and the remaining ductility, in order to manage the damage tolerance of the materials.

scholarly journals Optimal Falling Track Design for Twice detonating Fuze of Double event Fuel air Explosive with High Speed

2020 ◽  
Vol 70 (4) ◽  
pp. 366-373
Author(s):  
Congliang Ye ◽  
Qi Zhang
Keyword(s):  
High Speed ◽  
High Efficiency ◽  
Single Point ◽  
Design System ◽  
Motion Trajectory ◽  
Novel Approach ◽  
Scale Experiment ◽  
Set Up ◽  
Point Center ◽  
Double Event

To prevent the initiation failure caused by the uncontrolled fuze and improve the weapon reliability in the high-speed double-event fuel-air explosive (DEFAE) application, it is necessary to study the TDF motion trajectory and set up a twice-detonating fuze (TDF) design system. Hence, a novel approach of realising the fixed single-point center initiation by TDF within the fuel air cloud is proposed. Accordingly, a computational model for the TDF motion state with the nonlinear mechanics analysis is built due to the expensive and difficult full-scale experiment. Moreover, the TDF guidance design system is programmed using MATLAB with the equations of mechanical equilibrium. In addition, by this system, influences of various input parameters on the TDF motion trajectory are studied in detail singly. Conclusively, the result of a certain TDF example indicates that this paper provides an economical idea for the TDF design, and the developed graphical user interface of high-efficiency for the weapon designers to facilitate the high-speed DEFAE missile development.

Sign in / Sign up

Export Citation Format

Share Document