Integration and Application of Vision Systems in SMD Automatic Placement Machines

Circuit World ◽  
1990 ◽  
Vol 17 (1) ◽  
pp. 24-29 ◽  
Author(s):  
V. Neger ◽  
H. Pawlischek
Keyword(s):  
Printed Circuit Board ◽  
Mechanical Design ◽  
Circuit Board ◽  
Decisive Factor ◽  
Vision Systems ◽  
Printed Circuit ◽  
Automatic Placement ◽  
Placement Accuracy ◽  
Placement Machine ◽  
Placement Machines

The mechanical design of the automatic placement machine and the integrated application of different tools dictate the result of the placement process. The placement accuracy of the system is a decisive factor for the quality and cost of the printed circuit board. Vision systems have become indispensable in today's SMD placement technology.

Thermal Performance of Microelectronic Substrates With Submillimeter Integrated Vapor Chamber

2019 ◽  
Vol 141 (5) ◽  
Author(s):  
Sangbeom Cho ◽  
Yogendra Joshi
Keyword(s):  
Heat Transfer ◽  
Thermal Performance ◽  
Printed Circuit Board ◽  
Mechanical Design ◽  
Three Dimensional ◽  
Circuit Board ◽  
Working Fluid ◽  
Vapor Chamber ◽  
Conduction Model ◽  
Printed Circuit

We develop a vapor chamber integrated with a microelectronic packaging substrate and characterize its heat transfer performance. A prototype of vapor chamber integrated printed circuit board (PCB) is fabricated through successful completion of the following tasks: patterning copper micropillar wick structures on PCB, mechanical design and fabrication of condenser, device sealing, and device vacuuming and charging with working fluid. Two prototype vapor chambers with distinct micropillar array designs are fabricated, and their thermal performance tested under various heat inputs supplied from a 2 mm × 2 mm heat source. Thermal performance of the device improves with heat inputs, with the maximum performance of ∼20% over copper plated PCB with the same thickness. A three-dimensional computational fluid dynamics/heat transfer (CFD/HT) numerical model of the vapor chamber, coupled with the conduction model of the packaging substrate is developed, and the results are compared with test data.

Characteristics of Radiated Emission from a Printed Circuit Board with a Slit

2012 ◽  
Vol 132 (6) ◽  
pp. 404-410 ◽  
Author(s):  
Kenichi Nakayama ◽  
Kenichi Kagoshima ◽  
Shigeki Takeda
Keyword(s):  
Printed Circuit Board ◽  
Circuit Board ◽  
Printed Circuit ◽  
Radiated Emission

Confirming the Signal Integrity in Transmission of Digital Signals on Microstrip Straight Circuits via the Eye Diagrams

2014 ◽  
Vol 5 (1) ◽  
pp. 737-741
Author(s):  
Alejandro Dueñas Jiménez ◽  
Francisco Jiménez Hernández
Keyword(s):  
Integrated Circuits ◽  
Printed Circuit Board ◽  
Signal Integrity ◽  
High Volume ◽  
Information Storage ◽  
Circuit Board ◽  
Electromagnetic Simulation ◽  
Electronic Systems ◽  
Digital Signals ◽  
Printed Circuit

Because of the high volume of processing, transmission, and information storage, electronic systems presently requires faster clock speeds tosynchronizethe integrated circuits. Presently the “speeds” on the connections of a printed circuit board (PCB) are in the order of the GHz. At these frequencies the behavior of the interconnects are more like that of a transmission line, and hence distortion, delay, and phase shift- effects caused by phenomena like cross talk, ringing and over shot are present and may be undesirable for the performance of a circuit or system.Some of these phrases were extracted from the chapter eight of book “2-D Electromagnetic Simulation of Passive Microstrip Circuits” from the corresponding author of this paper.

Sign in / Sign up

Export Citation Format

Share Document